air pollution control regulation Articles

  • Air Pollution Control Specs

    As the full effect of the federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With more than 25 years of proven success in a variety of industries, catalytic and thermal oxidation has become a popular method for controlling volatile organic compound (VOC) and hazardous air ...


    By The CMM Group, LLC

  • Strategy for Complying with Air Pollution Control Regulations in the Chemical Industry

    Untitled Document The Clean Air Act (CAA) was originally passed by the United States Congress in 1970 and subsequently revised in 1977 for the purpose of protecting human health ...


    By Trinity Consultants

  • Controlling Air Pollutants case study

    While it's not always easy to determine what's required for compliance, new technologies can help achieve air-pollution control Selecting air-pollution control equipment can be tricky. It's not only difficult to determine which pollutants must be controlled, but also which type of equipment will best control them to required levels for any given process or facility because there is no ...


    By Bionomic Industries Inc.

  • Achieving Air Pollution Control With Catalytic Or Thermal Oxidizers

    As the full effect of the Federal Clean Air Act (CAA) Amendments passed by Congress in 1990 continue to impact today's industry, many manufacturing operations have become subject to stricter local, State and Federal clean air regulations. Both VOC (volatile organic compound) and HAP (hazardous air pollutant) emissions are strictly regulated since they lead to the formation of ground level ozone ...


    By The CMM Group, LLC

  • Achieving Air Pollution Control with Catalytic or Thermal Oxidizers

    As the full effect of 1990’s Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many manufacturing operations have become subject to stricter local, state and federal clean air regulations. Both VOC (volatile organic compound) and HAP (hazardous air pollutant) emissions are strictly regulated since they lead to the formation of ground-level ozone (or smog). The CAA ...


    By The CMM Group, LLC

  • Air Pollution Control in the Flexographic Printing Industry

    A basic review of technologies used, and selection criteria to consider, to successfully control the VOC/HAP emissions exhausted from flexographic printing presses. Within the flexographic printing industry, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new. Today, because of business expansion, modifications to plant operations, or changes in ...


    By The CMM Group, LLC

  • Treatment and Disposal of Air Pollution Control Residue

    What is APCr? Thermal waste management using Energy Recovery Facilities (ERFs) is now a well-managed and mature technology that is subject to environmental monitoring by a range of competent international bodies. These ERFs have been established as a means of diverting waste away from landfill disposal and for valorising the material and energy content of the waste. Counter to historic ...

  • High-temperature air pollution control technology

    Based on 35 years’ experience working for the environment, French company Maguin has developed the Cercat filter for high temperature air pollution control. David Gambier describes the technology and its potential use in the glassmaking industry.Maguin has been present in the waste thermal treatment field since the 1970s, offering customers innovative and state-of-the-art concepts. The company’s ...

  • Understanding Air Pollution Control System Design Specifications

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many different companies will be required to install new or additional air pollution control equipment.  With well over twenty-five years of proven success in a variety of industries, thermal and catalytic oxidation has become a popular method for controlling volatile organic compound (VOC) ...


    By The CMM Group, LLC

  • Air Pollution Control: Ready for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • Biofiltration - A Disruptive Technology for Sustainable Air Pollution Control

    ABSTRACTAir Pollution Control has emerged over the past 40 years as a significant industrial sector helping industrial facilities reduce emissions to comply with environmental regulations, reduce costs, and improve their public image. A variety of technologies have been developed to meet the needs of both the industries and the regulatory agencies.  Engineered biofiltration is a sustainable ...


  • Air pollution regulations drive deployment of flexible abatement solutions - Case Study

    To address the growing complexity of air pollution regulations, which have to address a multi-tiered array of local authority, national and international requirements, AirProtekt of Cambridge is offering a total package air pollution service that embraces process assessment, project design, supply of the air pollution equipment, installation and commissioning. Modern Air pollution regulations ...


    By AirProtekt Limited

  • `Strategy for Complying with Air Pollution Control Regulations in the Chemical Industry,` published in Environmental Protection, October 2001

    The Clean Air Act (CAA) was originally passed by the United States Congress in 1970 and subsequently revised in 1977 for the purpose of protecting human health and the environment. In 1990, then-President George Bush signed the Clean Air Act Amendments. The far-reaching impacts of the 1990 amendments added significantly to the regulatory challenges already faced by the chemical industry. The ...


    By Trinity Consultants

  • Intelligent Pollution Control

    The world faces difficult pollution control decisions. For every dollar spent on pollution control, there is an alternative investment in health improvement. For every dollar spent on reducing one pollutant, there is an alternative to reduce another. The most prudent course to make the best investment should include: Intelligent uncertainty Intelligent classification of options ...


    By The McIlvaine Company

  • Expert Interview: Pushing Air Pollution Control Technology Forward

    Catalytic Products International has a rich history of innovation and expertise in the field of air pollution control technology, as well as a goal of providing our customers with the knowledge that will help them meet their air pollution control needs. As part of our ongoing series of blogs in which we interview members of ...

  • The use of thermal plasma technology for treating air pollution control residues

    Energy from waste (EFW) is an exciting industry to be in right now in the UK. As pointed out by Euston Ling and Dr. Adam Read's article "The Shifting Landscape for Renewable Energy in the UK" {Waste Advantage Magazine, June 2011), the EFW capacity in the UK is set to grow strongly in the next 10 years, with some commentators predicting a three-fold increase in EFW capacity from the current 4 ...


    By Waste Advantage Magazine

  • Case History - Air Pollution Control in the Textile Industry: a Technology for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • Update and revision of Turkish air quality regulation

    The Air Quality Assurance Regulation (AQAR) was issued on October 1986. This regulation was basically a direct translation of the German TA-Luft of 1984. The main purpose of AQAR was to control the effect of industry, domestic heating and Traffic on ambient air quality which previously had not adequately been represented. Two new regulations, "Industry Related Air Pollution Control Regulation" ...


    By Inderscience Publishers

  • Idealized Air Quality Regulation: A One-Atmosphere Approach

    After almost 40 years of experience with the U.S. Clean Air Act (CAA), many of the original goals of the regulation have been achieved. The CAA and its subsequent amendments have been driven largely by science and technology, linking the Earth’s atmosphere with public health and welfare and sources of pollution. Knowledge in the 1960s about the atmosphere that ...

  • Strategies for controlling pollution from vehicular emissions in Beijing

    Beijing is one of the most polluted cities in the world, which is caused by surprising vehicular growth in the past decade. This paper describes the severe situation of vehicular emission pollution in Beijing, and discusses the following strategies for mitigation: improving fuel quality, controlling the exhaust from new vehicles, controlling the emissions from vehicles in use through, e.g., ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you