air pollution control technology Articles

  • Expert Interview: Pushing Air Pollution Control Technology Forward

    Catalytic Products International has a rich history of innovation and expertise in the field of air pollution control technology, as well as a goal of providing our customers with the knowledge that will help them meet their air pollution control needs. As part of our ongoing series of blogs in which we interview members of ...

  • Air Pollution Control Specs

    As the full effect of the federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With more than 25 years of proven success in a variety of industries, catalytic and thermal oxidation has become a popular method for controlling volatile organic compound (VOC) and hazardous air ...


    By The CMM Group, LLC

  • Biofiltration - A Disruptive Technology for Sustainable Air Pollution Control

    ABSTRACTAir Pollution Control has emerged over the past 40 years as a significant industrial sector helping industrial facilities reduce emissions to comply with environmental regulations, reduce costs, and improve their public image. A variety of technologies have been developed to meet the needs of both the industries and the regulatory agencies.  Engineered biofiltration is a sustainable ...


  • High-temperature air pollution control technology

    Based on 35 years’ experience working for the environment, French company Maguin has developed the Cercat filter for high temperature air pollution control. David Gambier describes the technology and its potential use in the glassmaking industry.Maguin has been present in the waste thermal treatment field since the 1970s, offering customers innovative and state-of-the-art concepts. The company’s ...

  • Alternative Fuels for Air Pollution Control

    Non-traditional, alternative fuels are all the rage now, especially with government pressure forcing increasing numbers of fossil-fired assets to shut down. While wind and solar have a place in our energy future, neither is reliable or inexpensive enough to be the complete answer.  Industry is looking for new fuels that can replace coal, oil and natural gas. Proposed alternative fuels come ...

  • Controlling Air Pollutants case study

    While it's not always easy to determine what's required for compliance, new technologies can help achieve air-pollution control Selecting air-pollution control equipment can be tricky. It's not only difficult to determine which pollutants must be controlled, but also which type of equipment will best control them to required levels for any given process or facility because there is no ...


    By Bionomic Industries Inc.

  • Identifying Your Ideal Air Pollution Control Technology, Scenario 3

    In our recent blog, "What's the Best Air Pollution Control Technology for My Process?",  we examined the many factors that can impact a facility's choice of air pollution control equipment. When they are ...

  • Identifying Your Ideal Air Pollution Control Technology, Scenario 1

    In our previous blog, "What's the Best Air Pollution Control Technology for My Process?", we reviewed the many factors that impact the choice of air pollution control equipment. In situations where a facility is considering their air pollution control needs, it is important for the ...

  • What`s the Best Air Pollution Control Technology for My Process?

    Air pollution control equipment is not something that business owners address by saying, “Let’s do the right thing for the environment and install an oxidizer!” In fact, the scenario is more likely to be “We need to increase productivity (always a good thing!), but that will put us over our annual emissions limits. Do we know what we will need? Where do we start? Who can ...

  • Identifying Your Ideal Air Pollution Control Technology, Scenario 2

    In our recent blog, "What's the Best Air Pollution Control Technology for My Process?", we took a look at the many factors that inform the choice of air pollution control equipment. When considering air pollution control needs for a facility, it is important for the plant's engineering ...

  • The use of thermal plasma technology for treating air pollution control residues

    Energy from waste (EFW) is an exciting industry to be in right now in the UK. As pointed out by Euston Ling and Dr. Adam Read's article "The Shifting Landscape for Renewable Energy in the UK" {Waste Advantage Magazine, June 2011), the EFW capacity in the UK is set to grow strongly in the next 10 years, with some commentators predicting a three-fold increase in EFW capacity from the current 4 ...


    By Waste Advantage Magazine

  • Case History - Air Pollution Control in the Textile Industry: a Technology for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • Economic evaluation for air pollution control technologies selection in power plants processes

    Air quality legislation is entering a transformation phase, shifting the concept of atmospheric emission control towards pollution prevention and emission minimization through a more integrated approach. This transformation, along with public pressure and increased foreign trade, is providing industries with incentives to consider their effect on the environment and to take action where required. ...

  • Integrated maximum efficiency air pollution control system

    A major uranium refiner required an air pollution control system to control emissions from their hazardous incinerator. The presence of radioactive material demanded that outlet emissions approach non-detectable levels. Macrotek was contracted to design and supply the system. Advanced, cutting edge technology was used to design a system with the lowest possible emissions, which has been ...


    By Macrotek Inc.

  • Time to address the air pollution control residue problem

    The incineration of municipal solid waste is gaining increasing importance in the UK, especially as the burning of waste can be used to generate energy, providing a more sustainable solution to our waste problem by diverting it from landfill sites. An issue with incineration is that some of our waste contains hazardous chemicals such as chlorine and lead which are volatilised during the process. ...

  • Modest Growth for Air Pollution Control Market

    The Clean Air Act amendments of 1990 created a wave of optimism in the air pollution control (APC) business. The subsequent decade, however, resulted in backwash of disappointment for APC companies as the market for stationary source equipment declined from 1-4% per year from 1993-1998. Growth returned to the APC market, however, with 1999 and 2000 characterized as 'good' years by the Institute ...

  • Air Pollution Control in the Flexographic Printing Industry

    A basic review of technologies used, and selection criteria to consider, to successfully control the VOC/HAP emissions exhausted from flexographic printing presses. Within the flexographic printing industry, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new. Today, because of business expansion, modifications to plant operations, or changes in ...


    By The CMM Group, LLC

  • Air Pollution Control in the Printing and Web Coating Industries

    For many U.S. companies in the printing and web coating business, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new.  In these industries, depending upon their location, companies have been installing APCS since the early 1970's.  However, for some companies the clock is still ticking regarding their compliance with local, state and federal ...


    By The CMM Group, LLC

  • Treatment and Disposal of Air Pollution Control Residue

    What is APCr? Thermal waste management using Energy Recovery Facilities (ERFs) is now a well-managed and mature technology that is subject to environmental monitoring by a range of competent international bodies. These ERFs have been established as a means of diverting waste away from landfill disposal and for valorising the material and energy content of the waste. Counter to historic ...

  • Understanding Air Pollution Control System Design Specifications

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many different companies will be required to install new or additional air pollution control equipment.  With well over twenty-five years of proven success in a variety of industries, thermal and catalytic oxidation has become a popular method for controlling volatile organic compound (VOC) ...


    By The CMM Group, LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you