air pollution equipment Articles

  • CPI Installs RTO at Tire Manufacturer

    Catalytic Products International (CPI) recently completed the installation of a new TRITON Series Regenerative Thermal Oxidizer (RTO) at the Northeast USA location of a global automotive tire manufacturer for the abatement of Volatile Organic Compounds ...

  • Downstream sulfuric acid plants benefit from WESP technology

    Industrial-grade sulfuric acid, still the most widely used industrial chemical in the world, continues to be sourced primarily (about 70 percent) as a nondiscretionary byproduct from the roasting, smelting, and refining of nonferrous metals. The rest comes from natural gas processing, electric power generation, and spent acid regeneration. These industries are usually heavy emitters of ...


    By Beltran Technologies, Inc.

  • Maintenance solutions for air pollution control equipment

    Manufacturing facilities are constantly under pressure to meet production forecasts at the lowest possible cost. These two goals; production output and cost control, can be difficult to obtain consistently in any manufacturing operation. Additional frustration to meet these goals can be exaggerated in today’s lean manufacturing climates that have trimmed budgets and reduced workforce. ...

  • Air Pollution Control Specs

    As the full effect of the federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With more than 25 years of proven success in a variety of industries, catalytic and thermal oxidation has become a popular method for controlling volatile organic compound (VOC) and hazardous air ...


    By The CMM Group, LLC

  • Silicone converter succeeds with custom air pollution control equipment - Case study

    Many industries utilize silicone as an ingredient in their manufactured product. Silicone enhances the attributes of the product or helps to improve production characteristics. Whatever the reason may be, users of solvent borne silicone's all face very troubling issues when it comes to the selection of the right air pollution control system. Among the air pollution control choices available to ...

  • Controlling Air Pollutants case study

    While it's not always easy to determine what's required for compliance, new technologies can help achieve air-pollution control Selecting air-pollution control equipment can be tricky. It's not only difficult to determine which pollutants must be controlled, but also which type of equipment will best control them to required levels for any given process or facility because there is no ...


    By Bionomic Industries Inc.

  • Air Pollution Control in the Flexographic Printing Industry

    A basic review of technologies used, and selection criteria to consider, to successfully control the VOC/HAP emissions exhausted from flexographic printing presses. Within the flexographic printing industry, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new. Today, because of business expansion, modifications to plant operations, or changes in ...


    By The CMM Group, LLC

  • How to Obtain an Air Pollution Construction Permit Infographic

    Today, U.S. Environmental Protection Agency (EPA) is more aggressively pursuing enforcement actions against industrial sources than ever before. This is a result of EPA desire to generate revenue, as well as reflecting the desires of current leadership. In this regulatory climate, it’s increasingly important for emission unit operators to understand enforcement risks and liabilities. ...

  • Achieving Air Pollution Control With Catalytic Or Thermal Oxidizers

    As the full effect of the Federal Clean Air Act (CAA) Amendments passed by Congress in 1990 continue to impact today's industry, many manufacturing operations have become subject to stricter local, State and Federal clean air regulations. Both VOC (volatile organic compound) and HAP (hazardous air pollutant) emissions are strictly regulated since they lead to the formation of ground level ozone ...


    By The CMM Group, LLC

  • Achieving Air Pollution Control with Catalytic or Thermal Oxidizers

    As the full effect of 1990’s Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many manufacturing operations have become subject to stricter local, state and federal clean air regulations. Both VOC (volatile organic compound) and HAP (hazardous air pollutant) emissions are strictly regulated since they lead to the formation of ground-level ozone (or smog). The CAA ...


    By The CMM Group, LLC

  • Understanding Air Pollution Control System Design Specifications

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many different companies will be required to install new or additional air pollution control equipment.  With well over twenty-five years of proven success in a variety of industries, thermal and catalytic oxidation has become a popular method for controlling volatile organic compound (VOC) ...


    By The CMM Group, LLC

  • Air Pollution Control: Ready for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • Chemical Air Pollution in the Clinical Research Environment

    There has been a revolution in awareness of chemical air pollution in research laboratories. I could tell you several 'horror stories' of casual exposure to mercury vapour, benzene and chromic acid (the ultimate glassware cleaning agent) among innocent biomedical PhD students (including myself) in the 1970s. But researchers in hospitals, and other laboratories can never afford to be complacent ...


    By Commercial Air Filtration

  • Air Pollution Control in the Printing and Web Coating Industries

    For many U.S. companies in the printing and web coating business, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new.  In these industries, depending upon their location, companies have been installing APCS since the early 1970's.  However, for some companies the clock is still ticking regarding their compliance with local, state and federal ...


    By The CMM Group, LLC

  • High-temperature air pollution control technology

    Based on 35 years’ experience working for the environment, French company Maguin has developed the Cercat filter for high temperature air pollution control. David Gambier describes the technology and its potential use in the glassmaking industry.Maguin has been present in the waste thermal treatment field since the 1970s, offering customers innovative and state-of-the-art concepts. The company’s ...

  • Modest Growth for Air Pollution Control Market

    The Clean Air Act amendments of 1990 created a wave of optimism in the air pollution control (APC) business. The subsequent decade, however, resulted in backwash of disappointment for APC companies as the market for stationary source equipment declined from 1-4% per year from 1993-1998. Growth returned to the APC market, however, with 1999 and 2000 characterized as 'good' years by the Institute ...

  • California Air Resources Board (CARB) places higher restrictions on air pollution

    As part of the California Global Warming Solutions Act (AB 32) the Air Resources Board (ARB) has approved an early action measure to reduce high-global warming potential (GWP) greenhouse gas (GHGs) emissions by establishing new legislation and defining requirements related to improved monitoring of AC/HVAC systems, enforcement of regulations, reporting of refrigerant usage, and recovery, ...


    By Verisae

  • Air pollution control for the fertilizer industry in the Middle East - Case Study

    Through our subsidiary company, APC Process Engineering, ERG has an impressive track record in the Middle East Fertilizer Production Industry. All our systems come with a performance guarantee backed by more than 30 years of experience successfully treating industrial air pollution around the world. ERG’s systems are used for treating silica, phosphate rock and scale dust, ammonia, hydrogen ...

  • Air Pollution Control Using Catalytic, Regenerative or Recuperative Systems

    For companies in a variety of industries, the clock is ticking regarding their compliance with local, state and federal clean air requirements. The need to provide adequate emission controls still looms on the horizon as these companies explore the various equipment and technology options available to them. While the guidelines regarding air pollution control are consistent by industry, a ...


    By The CMM Group, LLC

  • Air pollution control using laser analysis – Case Study

    An LDS 6 analyzer monitors HF emissions during the production of hydrofluoric acid in accordance with the German Technical Instructions on Air Quality Control (TA Luft) The customer Fine chemicals and inorganic basic chemicals have been developed and produced at the Seelze chemical site in northern Germany for more than 100 years. Such a basic chemical is ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you