air pressure sensor Articles

  • Instrument air case study

    Application Moisture is measured in instrument air to ensure that the air is properly dried. Problem Instrument air is used through-out a facility to protect delicate electronics, instruments, and to operate key process actuators. Many instruments also use instrument air to operate various pneumatic operators they might possess. Too frequently, there is ...

  • Ultrasonic Sensors: Range Vs Frequency

    Ultrasonic sensors are pretty cool. Transducers send and receive waves, measurements magically get spit out by the sensor, and nothing had to touch anything, right? You can choose sensors based on range, or type of transducer, or even safety ratings. Most sensors declare their range and frequency together, which seems kind of odd. Why is the range of an ultrasonic sensor tied to its frequency? ...

  • Sensors & Automation to Simplify Bioprocess Operations

    Utilising sensors & automation to simplify bioprocess operations means that more work can be done in less time. By automating the routine tasks carried out in the lab, valuable time can be devoted to more important tasks. Here are two practical examples of automating routine tasks in upstream and downstream bioprocessing with relatively simple instrumentation. Automated ...


    By Broadley-James Ltd

  • The benefits of monitoring compressed air

    Compressed air is used in many manufacturing processes for many different reasons, from the actuation and control of pneumatic valves and cylinders to the operation of process machinery and tooling. It can also be used as a transport medium for bulk materials or as a purge gas. For all its uses it is nonetheless expensive. This is why, through detailed monitoring, a business can enjoy the ...


    By Contrec Ltd

  • The benefits of monitoring compressed air

    Compressed air is used in many manufacturing processes for many different reasons, from the actuation and control of pneumatic valves and cylinders to the operation of process machinery and tooling. It can also be used as a transport medium for bulk materials or as a purge gas. For all its uses it is nonetheless expensive. This is why, through detailed monitoring, a business can enjoy the ...


    By Contrec Ltd

  • The Fundamentals of the Air Sampler Calibration-Verification Process

    INTRODUCTION The calibration of an air sampling instrument using a reference air flow calibrator requires attention to scientific detail in order to establish that the instrument’s reported values are correctly stated and valid under the actual operating conditions of the air sampling instrument. DEFINITIONS For the purposes of this ...

  • Cities in France become smarter thanks to Lufft Sensors

    CITYRAMA Smart Data for Smart Cities, is a French company and a subsidiary of Mobile Tech People (DPW), is an IoT (Internet of Things) platform for intelligent city management. It was founded in 2015 and provides PaaS (Platform as a Service) turnkey solutions for data collection and analysis in which everything is included ...

  • Safe Landings Whatever the Weather: Lufft Sensors on Airports

    Pilots, air traffic controllers and airport operators do their best to make air travel safer and more efficient. Sometimes, however, flight security depends on external factors we can hardly influence. This especially refers to risky weather conditions: Strong winds, icy cold or strong precipitation can have serious consequences. On average, 23% of all aircraft accidents and 68% of canceled ...

  • The challenges and benefits of local air quality monitoring

    A new generation of air quality monitors is now being offered to provide localised, real-time air quality readings – but the potential benefit is only just starting to be realised. It is generally accepted that whilst measurements from air quality reference stations are highly accurate, they are not sufficiently location-specific. Key pollutants – such as NO2 and PM2.5 ...


    By AQMesh

  • The new Multiparameter Weather Sensor Lufft WS10 is launched!

    After three years of development, extensive laboratory and field tests as well as a BETA test round at some of our partners, the time has finally come: The Lufft WS10 is ready to conquer the market! ...

  • Polluted sites: Groundwater decontamination requires robust level sensors

    Whether it be old landfills, coal tips, former military sites or refineries, what remains behind is contaminated ground, which is a danger to both humans and the environment. In the rehabilitation of these sites, level sensors are required which are resistant to the often aggressive hazardous substances encountered.  Contaminated sites are not only characterized by adverse health or ...

  • Top 10 Valve Considerations for Pressure Management Zones/DMA’s

    For basic pressure management or more advanced modulating pressure management, water suppliers create a network of District Metered Areas (DMA’s) or smaller, more manageable pressure management zones. The DMA or pressure zone gives the ability to measure flow and control pressure, when a Pressure Reducing Valve (PRV) ...


    By Singer Valve Inc.

  • Air Separation Plants and the Use of Oxygen Monitors

    Air separation plants are critical for many different industries, from clean energy to manufacturing. Nowadays, cryogenic is the most common type of distillation used to separate air into its component gases - nitrogen, oxygen, and inert gases including helium and argon. If your industry relies on air separation for product development or manufacturing, then knowing how the process works is ...

  • TSI dust monitors and Lufft weather sensors make a great team

    Both aerosols and wind speed and direction influence air quality significantly. This is why TSI Incorporated, a world leader in particle measurements, cooperates with Lufft USA in order to provide complete systems to measure PM2.5 (fine dust), PM10 (particles with a maximum diameter of 10 μm) as well as total PM levels. TSI Incorporated offers a variety of aerosol ...

  • Smart cities risk reputation with poor air quality data

    The team at AQMesh continue to receive many enquiries from smart city initiatives and are concerned that integrators risk undermining entire projects by distributing meaningless or misleading air quality information. “Many of the people I speak to are used to dealing with sensors that are easy to ‘plug and play’ and expect to be able to do the same with air quality sensors. This ...


    By AQMesh

  • Learning by doing: Lufft weather sensor supports school in Ukraine

    The Kherson Hydro-Meteorological Technical School educates among others future hydrologists and meteorologists. As learning by doing is the best approach, they use meteorological weather stations to train their students for future tasks. In the following you’ll find out, how we were able to support them with state-of-the-art technology. About Kherson Hydro-Meteorological Technical School in ...

  • Lufft & SICO equip racing track with the latest weather sensor technology

    The Circuit Ricardo Tormo (overall name: Circuit de la Comunitat Valenciana Ricardo Tormo) is a 4 km long motor racing circuit near Valencia, Spain. It is named after the former Spanish motorcycle racer Ricardo Tormo, who was born in this region. The circuit has existed since 1999 and was inaugurated trough Valencia Grand Prix during the Motorcycle World Championship. Since then it has been the ...

  • AQMesh: a new option for flexible air quality monitoring

    AQMesh has an impressive collection of global users and performance results measuring ambient air quality in applications ranging from traffic planning and urban hotspots to industrial fence line monitoring, building ventilation management, or environmental lobbying. This pole-mounted unit comes with an independent power supply and communications, so offering the possibility of measuring air ...


    By AQMesh

  • Smart solar monitoring / PV monitoring with smart weather sensors - Case Study

    When selecting a suitable pyranometer for photovoltaic monitoring the company Solare Datensysteme GmbH decided for the Lufft WS501-UMB All-in-one weather station. According to the company the Pyranometer delivers the most precise measurements for the overall irradiance and serves to measure the exact local prevailing overall irradiance at large plants. The Pyranometer is installed ...

  • How a Lufft weather sensor got on a 50 m high tower in Braunschweig, Germany

    We, from the amateur radio interest group of the Physikalisch-Technischen Bundesanstalt (PTB – the German national test authority) in Braunschweig, run our own amateur radio as well as a relay station (DB0PTB). Moreover, we are members of the German ham radio club represented by the local group of Braunschweig-Schuntertal (H66). On our factory premises, there’s a 50-meter-high tower ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you