air quality analyzer Articles

  • Economic Evaluation of Air Quality Targets for CO and Benzene

    The study is to identify and estimate the costs and benefits of meeting ambient air quality standards for carbon monoxide (CO) and benzene in the EU. The study should take the range of scientifically-based limit values for ambient air quality as given and analyze the costs and benefits of attaining these standards. These costs and benefits should be compared with the costs (loss of benefits) of ...

  • Air Quality Data Logging for the 21st Century

    Air Quality Professionals all over the world have to deal with fewer resources, regarding both funding and manpower. However the demands in availability and quality of data increase constantly not least caused by regulations. recordum™ recently introduced the airhopper™ to link all kinds of analyzers and air quality professional’s desktops using the potentials of the Internet. Vienna - ...


  • Confronting allegations of air quality non-compliance

    A facility with an air quality permit must comply with all the conditions of that permit and demonstrate its compliance on an on-going basis. Unfortunately, no matter how diligently the facility and corporate staff strives to assure continuous compliance, unexpected compliance challenges can occur. For example, new equipment fails the emissions guarantees provided by equipment vendors; new staff ...


    By Trinity Consultants

  • Chromatotec monitor air quality in Arcachon Bay through its own air quality station

    Chromatotec® made this summer the inauguration of its private monitoring station in Andernos-les-Bains. With a wealth of experience, thanks to which it already deployed massively its systems around the world, the group wanted to implement its own monitoring station to have complementary information to the actual air quality network. These data will allow the group to extend its ...


    By Chromatotec Group

  • Industrial Hygiene: Quality Assurance In Air Sampling and Analysis

    Industrial hygiene is the recognition, evaluation, and control of chemical, physical, biological, and ergonomic stresses in the workplace. Of the stresses listed, chemical stresses in the form of air contaminants are the most common. Air contaminants, their PELs and TLVs, and how to sample for them, is Industrial Hygiene 101 for most industrial hygienists. However, as simple as sampling and ...


  • New air quality rules challenge oil & natural gas industry

    EPA Administrator signed a suite of proposed new air regulations affecting both the Production/Processing and Transmission/Storage sectors of the oil and natural gas industry. The proposed rules mandate the use of emission controls as well as work practices through two different air regulatory programs – New Source Performance Standards (NSPS) and National Emissions Standards for Hazardous ...


    By Trinity Consultants

  • EPA Regulations Raise the Bar for Industrial Air Quality Testing

    Far-reaching environmental legislation continues to change the way Americans live, work, and run their businesses. For the past ...

  • Research NOx Analyzers

    ECO PHYSICS provides environmental experts with exceptionally sensitive and precise NOx measurement instruments. Please take a look at our newest press release on our research NOx analyzers below. Bound by the same laws of nature, ecology and physics are close associates in an on-going battle to preserve air quality around the globe. One of our planet's champions is Swiss-based ECO PHYSICS. The ...


    By ECO PHYSICS INC.

  • Monitoring Environmental Quality

    ' In order to determine the effectiveness of actions to improve environmental quality it is necessary to be able to measure relevant environmental parameters at a level of detail which is accurate enough to distinguish the anticipated changes. However, the establishment and maintenance of monitoring systems is time-consuming and expensive and therefore the scale of such systems needs to be kept ...


    By The World Bank

  • Hydrogen Chloride Analyzer (HCl, H2O)

    LGR's Hydrogen Chloride Analyzer (HCl, H2O) provides sensitive measurements of HCl in ambient air or in industrial process flows (e.g., coal and cement exhaust streams) with extremely high precision and sensitivity. No longer do you have to spend a lot of money or wait a long time to measure HCl with extremely high sensitivity – LGR's HCl Analyzer provides measurements every second with ...

  • Advanced Water Quality Techniques Course

    Abstract:The development of a strategic water quality monitoring program is based on prioritizing risks to public safety and economic reality. The development of global standardized methods and protocols for automated water quality monitoring would facilitate international communication of water quality information and comparison of standardized methods and protocols. The three primary methods ...


  • Warehouse Optimization: Balancing Equipment Performance and Worker Safety Through Emissions Measurements and Air Quality Monitoring

    Successful warehouse functionality is dependent on both maximizing equipment performance and providing a safe and healthy environment for workers that encourages productivity. However, these two factors are often at odds with each other as warehouse equipment such as forklifts, burnishers and delivery trucks emit toxic gases that can have the potential to create poor indoor air quality which ...

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • PureAire Oxygen Analyzers & Oxygen Monitors for Nitrogen Generators

    Nitrogen has many uses in industrial applications where oxidation would be undesirable. From carbonizing beer to preserving food, reducing fire danger, and cleaning equipment, nitrogen is a safe, inexpensive gas. For companies that need a steady supply of nitrogen gas, nitrogen generators work well. Learn about the uses of nitrogen generators and why you should use oxygen monitors in ...

  • Instrument air case study

    Application Moisture is measured in instrument air to ensure that the air is properly dried. Problem Instrument air is used through-out a facility to protect delicate electronics, instruments, and to operate key process actuators. Many instruments also use instrument air to operate various pneumatic operators they might possess. Too frequently, there is ...

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • Air Dispersion Models - Models can be used to aid in demonstrating environmental compliance, analyzing process changes and evaluating the impacts of accidental releases

    Air dispersion models are used to estimate the downwind concentration of pollutants emitted by various pollution sources such as industrial facilities and regional public traffic. Dispersion models play an important role in the industrial and regulatory communities. They are typically used to demonstrate compliance with National Ambient Air Quality Standards as part of new source review, ...


    By Trinity Consultants

  • Choosing the Right H2S Analyzer for Your Specific Application

    Not all H2S analyzers are created equal, and certain H2S analyzers work better on different applications than they do others. Significant amounts of time, money and headaches can be saved by learning about the different H2S analyzer principles of operation and choosing the correct analyzer for your ...


    By Analytical Systems Keco

  • Analyzer underpins growth of container inspection company

    After a career as a customs officer in the Netherlands, Wim van Tienen was well aware of the toxic gas hazards presented by some freight containers, so in 2009 he started a company, Van Tienen Milieuadvies B.V., offering gas analysis and safety advice. The company grew quickly and now employs 23 staff. Wim attributes a large part of this success to the advanced FTIR gas detection and analysis ...


    By Gasmet Technologies Oy

  • Leveraging the Web for Environmental Quality, Health and Safety

    Untitled Document The principles of continual improvement from management systems such as ISO 14001 and Six Sigma are well known. Less clear ...


    By Intelex Technologies Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you