air quality protocol Articles

  • Feasibility Study of an Express Assessment Protocol for the Indoor Air Quality of Air-conditioned Offices

    It is costly to sample all major toxic pollutants in community air. Sampling should be conducted based on an assessment strategy and monitoring planning. Assessment methods that rely on monitoring some representative pollutants have been proposed variously at different times. In Hong Kong, the Environmental Protection Department (HKEPD) launched an Indoor Air Quality (IAQ) certification scheme to ...


    By SAGE Publications

  • Molecular gas filtration: chemisorption versus physisorption

    Advantages of chemisorption over physisorption in molecular gas filtration. To remove pollutant compounds in air, both spherical and pelletized solid products are widely used. Examples of their application include Indoor Air Quality, Corrosion in Control Rooms, In Vitro Fertilisation, and Odours. What all these ...


    By Bioconservacion SA

  • The New England Air Quality Forecasting Pilot Program: Development of an Evaluation Protocol and Performance

    The National Oceanic and Atmospheric Administration recently sponsored the New England Forecasting Pilot Program to serve as a “test bed” for chemical forecasting by providing all of the elements of a National Air Quality Forecasting System, including the development and implementation of an evaluation protocol. This Pilot Program enlisted three regional-scale air quality models, serving as ...

  • Keeping APCr out of Landfill

    The CIWM have recently featured an article by our very own Dr David Deegan in the latest edition of their magazine. The article explains why Tetronics International were unhappy to be informed recently that Defra ministers had taken the decision not to remove the ...

  • A quantitative approach to the traffic air quality problem: the traffic air quality index

    The Traffic Air Quality (TAQ) model is a simple tool to estimate traffic fine particulate emissions on roadways (g/km) and can be used for both real-time analysis and for localized conformity analysis (“hot-spot” analysis for nonattainment areas) as defined by 40 CFR 93.123. This paper is a follow-up to a study published earlier regarding the development of the TAQ model. This paper shows how ...

  • Towards a model evaluation protocol for urban scale flow and dispersion models

    This paper reports on the stages forming a model evaluation protocol for urban flow and dispersion models proposed within the COST Action 732 on "Quality Assurance and Improvement of Micro–Scale Meteorological Models". It discusses the different components forming model evaluation with emphasis on validation and implementation of the protocol for the test case Mock Urban Setting Test (MUST). The ...


    By Inderscience Publishers

  • Comparison of two point–to–point protocols for transport and dispersion model evaluations

    Historically, assessments of transport and dispersion models have involved comparisons to field trial data using quantities derived from observations - e.g., maximum concentrations or plume widths. Recently, several methodologies that compare observations and predictions paired in space and time have been developed. Two protocols designed to deal with low observed or predicted values have ...


    By Inderscience Publishers

  • Technical protocol for evaluating natural attenuation of chlorinated solvents in ground water

    The U.S. Environmental Protection Agency is charged by Congress with protecting the Nation’s land, air, and water resources. Under a mandate of national environmental laws, the Agency strives to formulate and implement actions leading to a compatible balance between human activities and the ability of natural systems to support and nurture life. To meet these mandates, EPA’s research ...


    By RNAS Remediation Products

  • The challenges and benefits of local air quality monitoring

    A new generation of air quality monitors is now being offered to provide localised, real-time air quality readings – but the potential benefit is only just starting to be realised. It is generally accepted that whilst measurements from air quality reference stations are highly accurate, they are not sufficiently location-specific. Key pollutants – such as NO2 and PM2.5 ...


    By AQMesh

  • Minimising Risks to Air Quality and Regulatory Compliance With Total Filter Management

    It has been shown in recent studies that as much as 25% of the total site operating budget (excluding raw material costs) for a typical medium-large dosage-form manufacturing facility will be spent on compliance measures for internal quality systems and external regulatory activities. (1) Market realities indicate that the pharmaceutical companies will need to address the overall cost of ...


    By GVS Filter Technology

  • Model quality and safety studies

    The paper describes the EC initiative on model quality assessment and emphasises some of the problems encountered in the selection of data from field tests used in the evaluation process. Further, it discusses the impact of model uncertainties in safety studies of industrial plants. The model evaluation group (MEG) is a European initiative on evaluation of technical models used within the major ...


    By Inderscience Publishers

  • Monitoring Environmental Quality

    ' In order to determine the effectiveness of actions to improve environmental quality it is necessary to be able to measure relevant environmental parameters at a level of detail which is accurate enough to distinguish the anticipated changes. However, the establishment and maintenance of monitoring systems is time-consuming and expensive and therefore the scale of such systems needs to be kept ...


    By The World Bank

  • Advanced Water Quality Techniques Course

    Abstract:The development of a strategic water quality monitoring program is based on prioritizing risks to public safety and economic reality. The development of global standardized methods and protocols for automated water quality monitoring would facilitate international communication of water quality information and comparison of standardized methods and protocols. The three primary methods ...


  • Finding an OEM solution for air purifier & air cleaner

    Finding an OEM solution for air purifier & air cleaner, there are many companies out there who are committed to finding the right solution for you and your business. Most of them will develop a solution meeting your needs. Below are examples of solutions you may need to consider if you are seeking for air purifier OEM solutions. In developing new OEM products, your vendor will work with you ...


  • The Importance of high-quality service for regenerative thermal oxidizer

    The Importance of high-quality service for Regenerative Thermal Oxidizer. Safety, efficiency and compliance among pressures facing Regenerative Thermal Oxidizer operators. As any plant or maintenance manager working in a manufacturing environment using volatile organic compounds (VOCs) could tell you, the standards for support of all equipment along the process is critical for safety and ...

  • `Sensitivity of Aermod in modeling fugitive dust emissions sources,` presented at guideline on air quality models: next generation of models conference 2009

    Abstract Dispersion modelers have long faced challenges estimating ambient pollutant concentrationscaused by releases from “fugitive” sources of particulate matter, such as paved and unpavedroadways, raw material storage piles, outdoor material processing operations, agriculturalactivities, or windblown dust in general. Fugitive emissions are commonly defined as those thatcould not ...


    By Trinity Consultants

  • Building Services Management - Air Sampling -

    Untitled Document Maintenance professionals are often the first responders to mold complaints in their facilities. building occupants can be exposed to fungal (mold) ...


    By EMSL Analytical, Inc.

  • Ford drives environmental quality and efficiency with ESS` refrigerant compliance management software

    At Ford Motor Company's Van Dyke Plant in Sterling Heights, Michigan, 'Quality is Job 1' has always been more than a slogan. It was honored with the Quality Magazine 2008 Plant of the Year and the Michigan Dept. of Environmental Quality 2007 Clean Corporate Citizen awards. The plant excels because its commitment to quality extends to every facet of the business – from the performance of the ...


    By IHS

  • Air Pollution Is Making Office Workers Less Productive

    Businesses invest a great deal of time and money in interventions that claim to increase workers’ productivity through on-the-job training, new protocols, advice from consultants, and so on. Recent research suggests that there’s a surprising input into productivity that no one ever thinks about: clean air. We all know that air pollution is bad for our health, and researchers ...


    By Camfil Ltd

  • Designing and Implementing Perimeter Air Monitoring Programs

    Perimeter or fenceline ambient air quality and meteorological monitoring programs have become increasingly valuable at hazardous waste, landfill, dredging, ports, and MGP remediation sites. Air quality monitoring programs protect public health and reduce owner liability ...


    By AECOM

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you