air sampling equipment Articles

  • General Air Sampling Guidelines (PDF)

    This Standard Operating Procedure (SOP) provides guidance in developing and implementing sampling plans to assess the impact of hazardous waste sites on ambient air. It presents the United States Environmental Protection Agency/Environmental Response Team's (U.S. EPA/ERT's) approach to air sampling and monitoring and identifies equipment requirements. It is not within the scope of this SOP to ...

  • Building Services Management - Air Sampling -

    Untitled Document Maintenance professionals are often the first responders to mold complaints in their facilities. building occupants can be exposed to fungal (mold) ...


    By EMSL Analytical, Inc.

  • Teledyne Scientific Instruments - Direct Sampling MS and MS/MS for Real Time Air Monitoring

    Presented at the 44th ASMS Conference on Mass Spectrometry, May 12-16, 1996 Portland, OR. Published in the Proceedings of the 44th ASMS Conference on Mass Spectrometry May 12-16, 1996 Portland, OR, in press. DIRECT SAMPLING MS AND MS/MS FOR REAL TIME AIR MONITORING C. Remigi, P.T. Palmer, Dept. of Chemistry & Biochemistry, SF State University, SF, CA ...


    By Environics, Inc.

  • Setting the standards for headspace sampling by PID

    The responsiveness of PIDs to virtually all VOCs has seen them become the accepted tool for initial site entry assessment, ensuring optimal detection of unknown and often toxic or hazardous chemicals found at hazardous waste sites and chemical emergencies. The speed and accuracy of modern PID equipment means that many worker and community safety concerns during initial and ongoing operations can ...


    By Ion Science Ltd.

  • Casella intrinsically safe TUFF personal air sampling pump and dBadge sound level meter are a hit down under with Australian department of defence

    Following a competitive tender process, the Australian Department of Defence has taken delivery of 180 TUFF personal air sampling pumps and 180 CEL-350 dBadge personal noise dosimeters from Casella CEL (www.casellameasurement.com; 01234 844100), leading global specialist in industrial hygiene and occupational health monitoring equipment. Ronald Azar, ...


    By Casella

  • Instrument air case study

    Application Moisture is measured in instrument air to ensure that the air is properly dried. Problem Instrument air is used through-out a facility to protect delicate electronics, instruments, and to operate key process actuators. Many instruments also use instrument air to operate various pneumatic operators they might possess. Too frequently, there is ...

  • Partial Flow Sampling System For Transient Engine Testing

    For on-highway engine manufacturers, meeting model year 2007 emissions levels represents a major measurement challenge. However, future off-road engine emissions testing requirements are anticipated to include not only lower steady-state emissions levels, but also the possibility of using transient cycle data. As a result, engine manufacturers are seeking more cost-effective methods of ...


    By Sierra Instruments, Inc.

  • Oil Sampling Best Practices (Part 2)

    Understanding Dynamic Particle Equilibrium in Closed Loop Systems Dynamic Equilibrium Condition (DEC) is defined as a steady state condition where the normal wear rate in a machine results in no net gain or loss of particles. ...


    By Spectro Scientific

  • On-site determination of the radon concentration in water: sampling & on-line methods

    Radon in the water dissolves and escapes into the air during household water use, especially when it is heated. An easy-to-handle experimental set up forthe on-site determination of the Radon concentration in water samples has been developed and tested. In contrast to laboratory techniques for Radon-in-water determination such as liquid scintillation counting orgamma-ray spectroscopy, the ...


    By Bertin Instruments

  • A Breath of Fresh Air for Your

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With over two decades of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

  • The 10 Key Factors in Selecting a Stack Sampling Firm

    Summary: This document is a summary of the key factors that you should take into consideration when hiring a stack testing firm.This has been prepared in conjunction with the ASTM criteria for standard practice of testing companies.The ASTM criteria has been supplemented, based on 125 years of direct testing experience, which is the combined years of experience of the individuals that contributed ...

  • Selecting an Air Sampler for Bioaerosol Collection

    Indoor Air Quality (IAQ) investigators should select cost effective, efficient and the highest quality samplingequipment for evaluation of indoor environments. Particle impaction onto an adhesive surface (non-viable) or into culture media (viable) are the most widely used techniques to evaluate the presence and levels of airborne bioaerosols, particularly in non-industrial indoor environments. ...

  • Low-Flow (Minimal Drawdown) Ground-Water Sampling Procedures

    Untitled Document Background The Regional Superfund Ground Water Forum is a group of ground-water ...


    By Solinst Canada Ltd.

  • Designing and Implementing Perimeter Air Monitoring Programs

    Perimeter or fenceline ambient air quality and meteorological monitoring programs have become increasingly valuable at hazardous waste, landfill, dredging, ports, and MGP remediation sites. Air quality monitoring programs protect public health and reduce owner liability ...


    By AECOM

  • Sample Handling Strategies for Accurate Lead-In-Soil Measurements in the Field and Laboratory

    ABSTRACT The inhomogenous lead-in-soil matrix can present serious obstacles to accurate sample collection and handling. In typical lead-in-soil measurement, particle size related errors in sampling and sample handling often exceed all other sources of error. The magnitude of error can vary widely depending on the particulate nature of the lead contaminant and the effectiveness of control ...

  • Air Separation Plants and the Use of Oxygen Monitors

    Air separation plants are critical for many different industries, from clean energy to manufacturing. Nowadays, cryogenic is the most common type of distillation used to separate air into its component gases - nitrogen, oxygen, and inert gases including helium and argon. If your industry relies on air separation for product development or manufacturing, then knowing how the process works is ...

  • The challenges and benefits of local air quality monitoring

    A new generation of air quality monitors is now being offered to provide localised, real-time air quality readings – but the potential benefit is only just starting to be realised. It is generally accepted that whilst measurements from air quality reference stations are highly accurate, they are not sufficiently location-specific. Key pollutants – such as NO2 and PM2.5 ...


    By AQMesh

  • Proactive Indoor Air Quality Surveys Save Budgets

    As facility budgets tighten, managers are realizing the many benefits that money spent for proactive indoor air quality is a smart investment. Here is a simple comparison to exemplify the point. Indoor air quality investigations conducted in response to employee complaint or illness clusters cost $3.00 to $10.00 per square foot of space investigated compared to 2 to 10 cents per square foot for a ...

  • Latest innovative solutions for PAH & VOCs monitoring in air – Case study presentation

    Polycyclic Aromatic Hydrocarbons (PAHs) are a group of over 100 different chemicals that are known to be formed typically during incomplete combustion of organic matter at high temperature. Their major sources in the atmosphere include industrial processes, vehicle exhausts, waste incinerations, and domestic heating emissions. Due to their carcinogenic/mutagenic effects, 16 PAHs are currently ...


    By Chromatotec Group

  • Latest innovative solutions for PAH & VOCs monitoring in air – Case study presentation

    Polycyclic Aromatic Hydrocarbons (PAHs) are a group of over 100 different chemicals that are known to be formed typically during incomplete combustion of organic matter at high temperature. Their major sources in the atmosphere include industrial processes, vehicle exhausts, waste incinerations, and domestic heating emissions. Due to their carcinogenic/mutagenic effects, 16 PAHs are currently ...


    By Chromatotec Group

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you