air sampling equipment certification Articles

  • The 10 Key Factors in Selecting a Stack Sampling Firm

    Summary: This document is a summary of the key factors that you should take into consideration when hiring a stack testing firm.This has been prepared in conjunction with the ASTM criteria for standard practice of testing companies.The ASTM criteria has been supplemented, based on 125 years of direct testing experience, which is the combined years of experience of the individuals that contributed ...

  • Casella intrinsically safe TUFF personal air sampling pump and dBadge sound level meter are a hit down under with Australian department of defence

    Following a competitive tender process, the Australian Department of Defence has taken delivery of 180 TUFF personal air sampling pumps and 180 CEL-350 dBadge personal noise dosimeters from Casella CEL (www.casellameasurement.com; 01234 844100), leading global specialist in industrial hygiene and occupational health monitoring equipment. Ronald Azar, ...


    By Casella

  • How Can TO-15 Help You Solve Your Next IAQ Problem?

    Untitled Document Have you ever been asked to investigate unpleasant odors in a home or at the workplace? Are occupants developing headaches or a feeling of nausea? ...


    By EMSL Analytical, Inc.

  • PMP Inter-laboratory Correlation Exercise: Report on PART3: JRC Tests in July `06

    This document reports the results of the third part of the testing performed during the PMP inter-laboratory exercise - 13 July to 18 August 2006 - conducted at the Vehicles Emissions Laboratory (VELA2) in the Transport and Air Quality Unit of the European Commission’s Joint Research Centre (JRC-Ispra). This report presents the results of the work undertaken on a 2.0 HDi diesel car equipped with ...


  • Fawley Power Station– Case Study

    Project Highlights Asbestos air monitoring associated with asbestos removal and remediation was undertaken on the Fawley Power Station site on a daily basis for a duration of four years on behalf of CAPE Plc. Demolition asbestos survey have also been undertaken of all buildings due to demolished as a consequence of the ...

  • Suggested Practice for Remediation of Highly Infectious Biological Agent Contamination in Indoor Environments

    Untitled Document PURPOSE This suggested practice describes those basic procedures to be followed, and precautions ...

  • Increased demand for XRF analyser hire

    Steve Drake, NDT Market Manager at Ashtead Technology believes that XRF is one of the most important technologies in the company’s fleet of NDT and environmental testing instruments. “With a small amount of training, almost anyone can implement detailed inspections in a wide variety of applications, and with most instruments being lightweight and robust, XRF analysers are among the ...


    By Ashtead Technology Ltd

  • Breakthroughs in testing technology as new global player emerges

    Engineers and developers now have a choice of engine testing technologies following the recognition by the United States Federal Register of the BG3 Partial Flow Dilution sampling (PFD) technology developed by Sierra Instruments for engine particulate emissions, R&D and certification. Building on this news, the Monterey, California - based company has also extended its global footprint this ...


    By Sierra Instruments, Inc.

  • Final effluent monitors protect wastewater treatment efficiency

    Southern Water operates 370 wastewater treatment plants (WWTP), many of which are unmanned for most of the time and most have numeric environmental permits, so a network of online monitors has been established to improve treatment and protect discharge compliance. This has involved the installation of final effluent monitors at over 300 sites in a programme that has lasted for more than ten ...


  • Performance-Based Measurement Systems

    Many of the Environmental Protection Agency's (EPA's) methods used to monitor air, water and soil for environmental contaminants prescribe step-by-step details on how the chemical analysis must be conducted and prohibit any deviations or variations. The EPA has recognized that monitoring equipment and technology have improved tremendously over the last few years; that environmental media do not ...


    By WSP | Parsons Brinckerhoff

  • Achieving

    Introduction The leak repair requirements, under Title VI Section 608 of the Clean Air Act Amendments of 1990, require that when an owner or operator of an appliance that normally contains a refrigerant charge of more than 50 pounds discovers that refrigerant is leaking at a rate that would exceed the applicable trigger rate during a 12-month period, the owner or operator must take corrective ...


  • Intro to Industrial Hygiene

    Let's take a peek behind the curtain of one of our practitioner specialties--industrial hygiene. Read on for an interview with one of Antea Group's experienced pros. What is Industrial Hygiene? Industrial hygiene is a science and art devoted to the anticipation, recognition, evaluation, prevention, and control of those environmental factors or stresses arising ...


    By Antea Group - USA

  • The Gasmet story from an academic idea to a global business

    In this article, Dr Petri Jaakkola, founder and Chairman of Gasmet Technologies Oy explains how an idea shared by a group of researchers at the University of Oulu in Finland, during the early 1970s, developed into one of the world’s leading gas monitoring instrumentation manufacturers. Early history – technology development At first, the Finnish researchers understood ...


    By Gasmet Technologies Oy

  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • Brownfields redevelopment; Understanding your environmental responsibilities

    Brownfields are properties that have, or may have, contamination or the stigma of contamination that hinders the reuse of land for new development. The lure to these properties is great – seemingly prime, large tracts of land being sold for relatively inexpensive prices; the vision of unrestricted development; putting residential communities on these lands and reaping a great return. To further ...

  • Navigating NSPS subpart Db for boilers: a case study

    Over the past year, Trinity assisted a chemical company with the permitting and installation of a new 220 MMBtu/hr package boiler. The new natural gas-fired boiler replaces coal-fired units that were installed in the 1940s. Navigating through the numerous, and at times conflicting, regulatory requirements applicable to such a unit has been challenging. With careful planning and implementation, ...


    By Trinity Consultants

  • QuadOa and OGI: how EPA regulations are changing the way we look at gas leaks

    Earlier this year, the Environmental Protection Agency (EPA) published Regulation 40 CFR, Part 60, Sub-part OOOOa, commonly known as Quad Oa, and finally brought optical gas imaging (OGI) firmly into the mainstream. This presents a major shift in the way fugitive emissions are regulated, and the technology that can be used.  Detecting and acting on gas leaks is naturally a major ...

  • Determining Concrete Maturity Using Temperature Data Loggers

    CAS DataLoggers has provided the temperature monitoring devices for a construction contractor which needed to monitor and record the cure of structural concrete onsite. Once workers could prove that the concrete was strong enough, they could then proceed with new construction. The company was on a tight ...


    By CAS DATALOGGERS

  • Understanding GHG verification requirements

    Many organizations are required to report greenhouse gas (GHG) emissions to the U.S. EPA mandated by the Mandatory Reporting Rule (MRR). Effective December 29, 2009, large sources and suppliers in the United States will begin collecting data on January 1, 2010 and report GHG emissions to EPA by March 31, 2011. Similar to the EPA MRR, many states also have mandatory reporting requirements. The map ...


    By Trinity Consultants

  • Advanced Water Quality Techniques Course

    Abstract:The development of a strategic water quality monitoring program is based on prioritizing risks to public safety and economic reality. The development of global standardized methods and protocols for automated water quality monitoring would facilitate international communication of water quality information and comparison of standardized methods and protocols. The three primary methods ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you