air sampling kit Articles

  • General Air Sampling Guidelines (PDF)

    This Standard Operating Procedure (SOP) provides guidance in developing and implementing sampling plans to assess the impact of hazardous waste sites on ambient air. It presents the United States Environmental Protection Agency/Environmental Response Team's (U.S. EPA/ERT's) approach to air sampling and monitoring and identifies equipment requirements. It is not within the scope of this SOP to ...

  • Air Sampling During NPP Accident

    There has been considerable interest recently generated regarding emergency air sampling protocols as a result of the Fukushima accident in Japan. A major concern involving air sampling requirements is the accurate determination of gaseous-radioactive iodine species emitted from the NPP to the environment as a result of an accident. During normal NPP operation gaseous radioactive iodine ...

  • Expanding Reservoir Air Filters

    In all vented tanks, the rise and fall of fluid levels is offset by a corresponding volume of incoming and outgoing air. Keeping the incoming replacement air clean is essential for contamination control and thus the reliability of hydraulic systems. While targeting the system's reliability, JLM Systems Limited has developed the OilMiser™ Reservoir Aspirator (ORA) kit. This product represents a ...


    By JLM Systems Ltd

  • Casella intrinsically safe TUFF personal air sampling pump and dBadge sound level meter are a hit down under with Australian department of defence

    Following a competitive tender process, the Australian Department of Defence has taken delivery of 180 TUFF personal air sampling pumps and 180 CEL-350 dBadge personal noise dosimeters from Casella CEL (www.casellameasurement.com; 01234 844100), leading global specialist in industrial hygiene and occupational health monitoring equipment. Ronald Azar, ...


    By Casella

  • External exposure due to natural radioactivity in some household kits

    Specific activities (Bq/kg and ppm) of naturally occurring radionuclides were measured for about 57 samples from some household kits. The maximum specific activity values were 76.12, 118.37 and 3340.6 Bq/kg for U-238, Th-232 and K-40, respectively. The external exposure rate (μR/h) and dose rate (nG/h) were calculated. The maximum mean annual effective dose due to U-238 from Chinese ceramic ...


    By Inderscience Publishers

  • Hydrogen Sulfide Continuous Emission Monitoring of Odor Control Systems

    ABSTRACT This paper discusses the use of the Sycamore Continuous Emissions Monitor (CEM) for monitoring Hydrogen Sulfide Gas concentrations within odor control systems. The CEM is configurable as a single, two or three point system and can measure from 5 ppb to 2 PPM, 0.1 – 20 PPM, and 0 – 200 PPM and is designed for monitoring of scrubbers, carbon adsorbers, biofilters and biotrickling ...

  • An investigation and remediation of TNT contaminated soils.

    An investigation and remediation of TNT contaminated soils and wastes was conducted at the Apache Powder Superfund Site in Cochise County, Arizona during 1999 and 2000. TNT contamination was most likely the result of salvage operations of World War I munitions. Characterized by a steep hillside and arroyo cutting through the wastes, the site offered challenges of stability, access, health and ...


    By Hargis + Associates Inc

  • Drill King International is exploring reverse-circulation drilling opportunities in Chile

    The new XT RC50 hammer from Drill King International completed drilling trials at the beginning of August 2016. This 5in (127mm) reverse-circulation (RC) hammer is the first one from the XT (Extreme Torque) series, introduced by the down-the-hole (DTH) drilling equipment manufacturer from Texas, US. The XT RC hammer series will complement Drill King's extensive line of DTH air- and water-powered ...

  • Case study - GRO in soil at gasoline UST site

    These case studies show the performance using Sitelab’s UVF-3100 analyzer testing gasoline range organic hydrocarbons.  This includes benzene, xylene, BTEX and other volatile petroleum compounds in the GRO or VPH C6 to C10 hydrocarbon range. When calibrated using Sitelab's GRO calibration kit (CAL-025), the UVF analyzer produces test results that correlate well to laboratory ...


    By Sitelab Corporation

  • IAQ investigators often overlook Bacteria as the Root Cause of Occupant Complaints

    Untitled Document Many investigators have been dealing with mold issues the last few years and may have been overlooking bacteria as the underlying microbial problem. Bacteria ...


    By EMSL Analytical, Inc.

  • Getting the lead out — at the faucet

    You might be surprised at where you’ll find a customer’s lead. Lead is making headlines. First, we should note that the current attention is not due to water, air or soil contamination, but from lead contamination recently found in toys and children’s jewelry made in China. This is very frightening for any parent because of the harm lead can to cause in children. How could this happen? How ...

  • Hired metals analyser ensures remediation success

    Cognition Land and Water Ltd, a UK based remediation specialist, has hired a portable XRF metals analyser to improve the speed of remediation work at a project in London’s Kentish Town. The project had a major impact on local residents so timescales were extremely tight but Cognition’s Charlie Jarvis says “It would not have been possible to meet the deadline without the use of ...


    By Ashtead Technology Ltd

  • A Guide to Gas Detector Tubes. Your Questions Answered

    Gas detector tubes are easy to use, are low cost, and the method is intrinsically safe, allowing it to be deployed in all industries. Because detector tubes don’t require calibration, users see the benefits of this technology over electronic gas detectors due to their ease of ...


    By a1-cbiss

  • Field Detection of Chlorinated Alkenes in Well Water using the FROG-4000 Portable GC - Case Study

    Introduction Defiant’s FROG 4000, a portable GCPID system, was used to identify and determine the concentration of chlorinated alkenes in several extraction wells located in Tacoma Washington. Split samples were taken at each well and sent to an offsite lab for analysis. This case study examines the field exercise and highlights the high degree of agreement between the offsite lab and ...


    By Northern ANI Solutions Ltd.

  • Increased demand for XRF analyser hire

    Steve Drake, NDT Market Manager at Ashtead Technology believes that XRF is one of the most important technologies in the company’s fleet of NDT and environmental testing instruments. “With a small amount of training, almost anyone can implement detailed inspections in a wide variety of applications, and with most instruments being lightweight and robust, XRF analysers are among the ...


    By Ashtead Technology Ltd

  • Monitoring Hydrocarbons in Wastewater - Case Study

    The Situation A wastewater treatment company operated an oil/water separation facility on a multi-acre industrial site in Northern California. Its purpose was to recycle oil products for profit while at the same time providing a wastewater treatment service for industries based in Northern California. The oily water mixes processed by the company were obtained from ...

  • With fit-for-purpose CMM fixturing we save 50% of the inspection time - Case Study

    Yeovil Precision Castings (YPC) Limited manufactures production quantities of high-quality investment castings in air and vacuum. It supplies to customers in aerospace, medical, power generation, vehicle components, safety equipment, railway and general engineering. To meet its customer demand for more thorough batch sampling, the company has invested in two DCC co-ordinate measuring ...


    By Renishaw plc

  • Portable lead analyzer to locate source of lead

    OBJECTIVE: To investigate the sources of lead in the environment in children with elevated blood, with the help of a Field Portable X-Ray ...

  • Read about Confined Space in Construction and Atmospheric Testing Right Here!

    In 1993, 29 CFR 1910.146 went into effect as the first federal legislation governing entry into permit-required confined spaces in general industry. Because some industries, such as the construction industry, were covered by specific Occupational Safety and Health Administration (OSHA) safety regulations, they were exempt from the confined space entry requirements of the general industry rule. ...


    By Argus-Hazco

  • Compost Data Tracking And Analysis

    From tip fee invoice tracking to process control to compost product sampling, information gathering, analysis and reporting are key to successful facility operations.   COMPOSTING is a highly regulated component ...


    By BioCycle Magazine

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you