air sampling supply Articles

  • Building Services Management - Air Sampling -

    Untitled Document Maintenance professionals are often the first responders to mold complaints in their facilities. building occupants can be exposed to fungal (mold) ...


    By EMSL Analytical, Inc.

  • Expanding Reservoir Air Filters

    In all vented tanks, the rise and fall of fluid levels is offset by a corresponding volume of incoming and outgoing air. Keeping the incoming replacement air clean is essential for contamination control and thus the reliability of hydraulic systems. While targeting the system's reliability, JLM Systems Limited has developed the OilMiser™ Reservoir Aspirator (ORA) kit. This product represents a ...


    By JLM Systems Ltd

  • A Breath of Fresh Air for Your

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With over two decades of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

  • Increasing Environmental Commitment in Supply Chain Performance Management

    In 2015, China reinforced its environmental policies and laws, strengthening air and water pollution controls. Trend toward Environmental Commitment Almost immediately, polluters found themselves subject to litigation, for example, a group of chemical companies subjected to compensation demands for about US$26 million (1). China is supporting victims of ...


    By SGS

  • Use Precision Hydrogen Generators as a Centralized Gas Supply Solution

    Learn how to use your Peak Precision Hydrogen generator as centralized gas solution. Overview As laboratories are increasingly under pressure to streamline their operations, a reliable, consistent, stable, and safe supply of gases for applications such as gas chromatography (GC) or mass spectrometry (MS) has never been more ...

  • Using Rn-222 to manage the air quality of air conditioned buildings in Hong Kong

    This paper proposes a pragmatic methodology to manage the air quality of an air conditioned building as well as optimizing energy consumption during venting. Radon-222 (Rn-222) is used as a tracer to quantify the specific production rates and resultant losses of pollutants for which the information is important in indoor air quality management. A term, indoor pollutant inventory, is introduced ...


    By SAGE Publications

  • Low-Flow (Minimal Drawdown) Ground-Water Sampling Procedures

    Untitled Document Background The Regional Superfund Ground Water Forum is a group of ground-water ...


    By Solinst Canada Ltd.

  • More than penalty avoidance - the role of the MSDS throughout the supply chain

    Environmental health and safety (EH&S) compliance programs are typically geared toward delivering continuous improvement in performance and/or reducing risk. Companies that want to deliver sustainable ongoing improvements in compliance associated with handling chemicals are best advised to take a full-lifecycle approach to understanding and managing chemical product compliance across the ...


    By Verisk 3E

  • WPL supplies Farne Salmon and Trout with a substantial new effluent treatment plant

    A new effluent treatment plant designed by WPL is ensuring that Farne Salmon and Trout Ltd in Berwickshire - one of Europe's largest smoked salmon facilities - complies with tighter local trade effluent discharge regulations, whilst significantly reducing its sewer discharge costs. WPL worked with Farne and Scottish Water from an early stage to design and supply a substantial, energy efficient ...


    By WPL Ltd

  • Moscow snow reveals new air pollutants

    GC-MS analysis of Moscow snow reveals new pollutants in the city air. Cities, with their traffic, industrial centers and factories, usually suffer from some degree of air pollution. Moscow, which houses all of these as well as power plants and an oil refinery, is no different. Regular monitoring of environmental pollutants is common practice in many cities and priority pollutants are detected and ...

  • Knowledge-based planning of groundwater treatment trains for an efficient drinking water supply system in urban areas

    This paper presents knowledge-based planning of the most appropriate treatment schemes for drinking water supply (DWS) systems, jointly applying statistical tools and experimental tests. Milan City was chosen as the case study, its DWS system being composed of more than 20 DWS units, widespread in the urban area. First, multivariate statistical techniques (factor analysis and cluster analysis) ...


    By IWA Publishing

  • WPL supplies Farne Salmon and Trout with a substantial new effluent treatment plant case study

    A new effluent treatment plant designed by WPL is ensuring that Farne Salmon and Trout Ltd in Berwickshire - one of Europe's largest smoked salmon facilities - complies with tighter local trade effluent discharge regulations, whilst significantly reducing its sewer discharge costs. WPL worked with Farne and Scottish Water from an early stage to design ...


    By WPL Ltd

  • Minimising Risks to Air Quality and Regulatory Compliance With Total Filter Management

    It has been shown in recent studies that as much as 25% of the total site operating budget (excluding raw material costs) for a typical medium-large dosage-form manufacturing facility will be spent on compliance measures for internal quality systems and external regulatory activities. (1) Market realities indicate that the pharmaceutical companies will need to address the overall cost of ...


    By GVS Filter Technology

  • Meat processing factory - Case Study

    Succeeded in stable supply of polymer to two equipment from one Polymer Make-up System This customer was newly proceeding with a plan for installing a wastewater treatment plant. As the wastewater discharged from the factory contained much oil, the customer was planning to install a dissolved air flotation system in the wastewater treatment process. The VOLUTE Dewatering Press, having strong ...


    By AMCON Inc.

  • Checklist for making XRF pellets | Spectroscopy Guides

    Sample preparation for XRF pellets The process of pressing sample pellets suitable for XRF spectroscopic measurement covers milling/grinding your sample to a suitable fineness, mixing the powdered sample with x-ray powder or similar binder, inserting the mixture into a pellet die and finally compressing the die at pressures between 15 and 40 tons. ...


    By Specac Limited

  • Custom Pressurized Plastic Pipe Disposal Solution - Case Study

    Problem A large petro chemical company asked Waste Control Systems to solve a problem of pressurized plastic pipe after it had been tested for bursting strength. The QA test consisted of taking an eighteen inch section of pipe and welding caps on each end. One cap was solid and the other consisted of a fitting to allow air to be pumped into the section of pipe. A check valve was ...


    By Waste Control Systems Inc

  • Case study - Ice blast technology for surface decontamination

    Scope of Work: Coulson Ice Blast (CIB) report no. 1070601, prepared in fulfillment of Bechtel BWXT Idaho, LLC (BBWI) Purchase Order no. 0000759, per Statement of Work entitled: Scope of Work for Coulson Ice Blast Decontamination” as follows: “Coulson Ice Blast (CIB) will conduct surface stripping tests on surrogate coupons they will receive from the INEEL ...


    By Coulson Ice Blast

  • Technical Hints and Tips for Optimal Performance of your Loeser Osmometer

    General function and description: The sample (serum, blood, urine or any other aqueous solution) is filled in a plastic sample tube and cooled via a Peltier element. These are semiconductor devices, which become cold ...


    By Camlab Limited

  • Drill King International is exploring reverse-circulation drilling opportunities in Chile

    The new XT RC50 hammer from Drill King International completed drilling trials at the beginning of August 2016. This 5in (127mm) reverse-circulation (RC) hammer is the first one from the XT (Extreme Torque) series, introduced by the down-the-hole (DTH) drilling equipment manufacturer from Texas, US. The XT RC hammer series will complement Drill King's extensive line of DTH air- and water-powered ...

  • Continuous measurement of Process oxygen for Claus sulfur recovery unit (sru) start-ups and shut-downs case study

    During start-up and shut-down, any time a sulfur recovery unit (SRU) transitions from ambient temperature through fuel gas warm up to the introduction of acid gas, measurement of 02 stoichiometry is critical. Historically, operators have manually taken samples using a portable electrochemical type Os analyzer. While giving more or less satisfactory results, the requirement for more stringent ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you