air separation product Articles

  • Nitrogen Oxides Reactions in Diesel Oxidation Catalyst

    ABSTRACT Two catalyst formulations were tested OII a diesel engine. A Fourier Transform Infrared (FTIR) analyzer was used to measure concentrations of nitric oxide ...


    By DCL International Inc.

  • Tailor-made washing lines for wet recycling of conterminated plastics

    NEUE HERBOLD Maschinen- und Anlagenbau GmbH, located in Sinsheim/Germany manufactures and sells complete washing lines for the recycling of plastics waste. Prior to re-pelletizing the plastic waste must be size reduced, washed and if necessary foreign materials separated. ...

  • Solutions For Difficult Ejection

    Solutions For Difficult Ejection According to the above articles reason analysis, mainly we have following solutions for Difficult Ejection: 1)Shooting technique solutions * Avoid excessive melt injection. *Reduce injection pressure and dwell pressure, shorten dwell time. *Reduce injection rate and barrel temperature,optimize dimension of nozzle, runner and ...


    By Focare Mould Co.,Ltd.

  • Aerator solution for WWTP

    IN 1990, CIRCUIT ENGINEERING began importing the Aire-02 Triton Aerators from the United States. With over 60 000 installations of the Air-02 Aerators currently in operation worldwide, Aeration Industries is one of the world's leading aerator companies. This month. Water&Sanitation Africa spoke to Ryan Beswick, director of Circuit Environmental Engineering, to find out more about these ...

  • Incineration Industry: Scrubber on Sludge Incinerator Reduces Atmospheric Emissions Case Study

    Aberdeen Sewage Treatment Plant in Aberdeen, Washington started up their new Electric Infrared Incinerator in May, 1981. The sewage sludge incinerator, product of Shirco, Inc., needed a pollution control device in order to meet state, local and federal requirements for atmospheric emissions, according to the emissions test on the unit performed January, 1982. Chosen was a Model 24×24- ...


    By CR Clean Air Group, LLC

  • World leader in the key technology areas of heat transfer, separation and fluid handling looking to increase revenues by 40%

    Situation: The world leader in the key technology areas of heat transfer, separation and fluid handling had set a goal to increase revenues by 40% in an overseas manufacturing plant. In order to achieve this business objective, it was critical to increase the coating capacity in the manufacturing process. Due to limited available floor space and the need to optimize material flow, ...


    By Duroair Technologies Inc.

  • TopAir’s Ductless Fume Hood

    TopAir is the flagship brand of Statitech Ltd., a leading developer, producer and marketer of a wide variety of standard and custom-made cleanroom products for the electronic, semi-conductor, medical and defense industries. Statitech has acquired a well earned reputation as a market leader in its field. Customers include the pharmaceutical giant Teva Industries Ltd., Israel Aircraft Industries ...


    By TopAir Systems

  • Copper Wire Granulator, Novel to You?

    Copper Wire Granulator is a kind of excellent waste recycling and environmentally friendly equipment used for granulating waste copper wire and separating the copper from plastic to get the pure copper granule and plastic finally. It also can be called wire granulator / cable granulator ...

  • Taylor made washing lines for wet recycling of conterminated plastics

    NEUE HERBOLD Maschinen- und Anlagenbau GmbH, located in Sinsheim/Germany manufactures and sells complete washing lines for the recycling of plastics waste. Prior to re-pelletizing the plastic waste must be size reduced, washed and if necessary foreign materials separated. NEUE HERBOLD washing lines, produce granules or flakes with a high quality even at today's ...

  • Remediation of hydrocarbon contaminants from oil lagoons and refinery waste - case study

    In 2007 econ delivered an indirectly heated thermal desorption plant to a client in Kuwait. The plant is de-signed to treat various types of waste with hydrocarbon contaminant content. In particular refinery waste, oil lagoons and down hole drilling waste. The aim is to recover the waste hydrocarbons from the soil/sand and remediate the lagoons of their contaminants.  Due to the natural ...

  • Capturing Organic Vapors from Non-Condensable Gases Using Activated Carbon Adsorption Technology

     There are many established uses of vapor phase carbon adsorption technology in the chemical industry. The majority are to capture organic vapors from non-condensable gas streams, such as process exhausts. Other applications include process gas separations such as the removal of oxygen from air in the production of nitrogen. This article focuses on the capture of organic vapors from ...


    By AMCEC Inc.

  • Amino acid analysis matrix independent analysis of free amino acids

    Pickering Laboratories specializes in manufacturing of cationexchange columns and eluants for amino acid analysis. No other techniques have been shown to match the reproducibility and sensitivity of this post-column methodology. Advantages of this method, such as absence of matrix interferences, are especially important in analysis of native samples. Pickering provides several options for the ...

  • Monitoring Hydrocarbons in Wastewater - Case Study

    The Situation A wastewater treatment company operated an oil/water separation facility on a multi-acre industrial site in Northern California. Its purpose was to recycle oil products for profit while at the same time providing a wastewater treatment service for industries based in Northern California. The oily water mixes processed by the company were obtained from ...

  • Glass manufacturer controls gas ratios - Case Study

    For a specialty glass manufacturer that constructs high-quality glass containers for the pharmaceutical and analytical industry, manual control of air and natural gas flow to the burner tip had resulted in unacceptable levels of rejected material, as well as excessive gas consumption. The process engineers were seeking methods to improve glass quality, reduce raw material waste, and increase ...


    By Sierra Instruments, Inc.

  • Case study - Action Recyclers - Milwaukee, Wisconsin USA

    Customer Action Recyclers is a rapidly growing recycling company in Milwaukee which was founded in 2005. The company now employs    more than 30 employees and owns several recycling centres. Requirements PET and PE are to be recycled from a mixed fraction (60% PE/PET and 40% other materials such as other plastics, wood, paper, etc) with a ...

  • How molecular sieve DESICCANT is used for oxygen generation?

    Molecular sieves are basically three dimensional aluminosilicate that contains cavities inside the crystal. Through various channels these cavities are interconnected with each other. These channels are called pores. All the pores have an exact diameter which is uniform. This diameter plays a very crucial role in the application of these zeolites. This means that the molecules which have a ...


    By Sorbead India

  • 5 Must Do Steps to Keep Your Jet Aeration System Running Smoothly

    Sustained low dissolved oxygen levels in an aeration tank can cause a host of problems — including difficulties in maintaining soluble BOD (biochemical oxygen demand), reduced nitrogen removal efficiency, and challenges with biomass separation. A jet aeration system offers a solution, utilizing both a pump and blower to meet the oxygen transfer requirements of a biological process. A well ...


    By KLa Systems, Inc.

  • Beale air force base receives recognition for outstanding refrigerant management and saves US$45,000

    The United States Air Force is strongly committed to promoting best practices in environmental management and operational efficiencies that enable cost savings at its facilities around the world. At Beale Air Force Base in California, both of these goals are being achieved at once. Two long-standing champions of data automation technologies for the base's refrigerant management processes, Dennis ...


    By IHS Markit

  • Chemical Industry: Wet Scrubber Passes Acid Anhydride Test Case Study

    A leading U.S. chemical company upgraded air pollution control of maleic anhydride fumes at one of its overseas plants by installing a venturi scrubber. Selection of the scrubber was based on a pilot study to determine the percentage recovery and the maximum solution concentration of maleic anhydride that could be achieved using a wet scrubber. One significant reason for pretesting the ...


    By CR Clean Air Group, LLC

  • Petro-Chemical Industry: Wet Scrubber Passes Acid Anhydride Test Case Study

    A leading U.S. chemical company upgraded air pollution control of maleic anhydride fumes at one of its overseas plants by installing a venturi scrubber. Selection of the scrubber was based on a pilot study to determine the percentage recovery and the maximum solution concentration of maleic anhydride that could be achieved using a wet scrubber. One significant reason for pretesting the ...


    By CR Clean Air Group, LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you