air separation product Articles

  • Interserve Waste Recycling Facility - Case Study

    EMS is proud to work with Interserve, one of the world’s foremost support service and construction companies. They are listed in the FTSE 250 index with gross revenue of £2.3 billion and a workforce of over 50,000 people worldwide. They asked EMS to help them make a large transition at a new-build site. They wanted their operation to move from manual sorting to a modern, ...

  • Copper Wire Granulator, Novel to You?

    Copper Wire Granulator is a kind of excellent waste recycling and environmentally friendly equipment used for granulating waste copper wire and separating the copper from plastic to get the pure copper granule and plastic finally. It also can be called wire granulator / cable granulator ...

  • PureAire Oxygen Analyzers & Oxygen Monitors for Nitrogen Generators

    Nitrogen has many uses in industrial applications where oxidation would be undesirable. From carbonizing beer to preserving food, reducing fire danger, and cleaning equipment, nitrogen is a safe, inexpensive gas. For companies that need a steady supply of nitrogen gas, nitrogen generators work well. Learn about the uses of nitrogen generators and why you should use oxygen monitors in ...

  • Common Treatment Train for Nonhalogenated VOCs

    A treatment train is the combination of different treatment technologies. A system diagram of a common treatment train for nonhalogenated VOCs is illustrated below. A soil vapor extraction system is used to pull VOC vapor from the contaminated soil. An air sparging system delivers air below the water table to enhance bioremediation. After passing through a liquid/vapor separator, the VOC ...

  • Chemical Industry: Wet Scrubber Passes Acid Anhydride Test Case Study

    A leading U.S. chemical company upgraded air pollution control of maleic anhydride fumes at one of its overseas plants by installing a venturi scrubber. Selection of the scrubber was based on a pilot study to determine the percentage recovery and the maximum solution concentration of maleic anhydride that could be achieved using a wet scrubber. One significant reason for pretesting the ...


    By CR Clean Air Group, LLC

  • Petro-Chemical Industry: Wet Scrubber Passes Acid Anhydride Test Case Study

    A leading U.S. chemical company upgraded air pollution control of maleic anhydride fumes at one of its overseas plants by installing a venturi scrubber. Selection of the scrubber was based on a pilot study to determine the percentage recovery and the maximum solution concentration of maleic anhydride that could be achieved using a wet scrubber. One significant reason for pretesting the ...


    By CR Clean Air Group, LLC

  • Wastewater treatment in a milk-processing company

    Description of the plant The accruing wastewater from the production of cheese and milk products is collected in a centralised pump sump and given to a first pre-treatment step. This step includes a separation of bigger parts by a sieve and a flocculation step with a dissolved air flotation for elimination of fats and cheese particles. After that, the pre-treatened water is buffered ...

  • Operating a two-stage microbial fuel cell–constructed wetland for fuller wastewater treatment and more efficient electricity generation

    By integrating microbial fuel cells (MFCs) into constructed wetlands (CWs) the need and cost of building a reactor are eliminated, while CWs provide the simultaneous redox conditions required for optimum MFC performance. Two single-stage MFC-CWs, with dewatered alum sludge cake as the main wetland medium for enhanced phosphorus removal, were operated to determine the effects of electrode ...


    By IWA Publishing

  • Multifunctional Well Implemented for In Situ Remediation of Hydrocarbon Contaminations in Soil and Groundwater

    Abstract A recently developed Multifunctional Well has been implemented for the remediation of subsurface contamination caused by hydrocarbon spills. Four different remediation processes can be operated within the same well. At optimal efficiency of each remediation process, successive treatment of the capillary fringes, the vadose zone, and the aquifer can be accomplished. Each treatment ...


  • Innovative Q-PAC® packed two stage odor control scrubber saves $500,000

    Two stages in one 12 ft (3.7 m) tower treat 68,500 cfm (116,400 m3/hr) using high-capacity packing A new scrubber at a Camden, NJ biosolids processing facility uses advanced technology to cut the cost of odor control. The system was designed, built and installed by Bay Products with process design assistance from Lantec Products. A single tower is used to remove malodorous gases ...


    By Lantec Products, Inc.

  • Capturing Organic Vapors from Non-Condensable Gases Using Activated Carbon Adsorption Technology

     There are many established uses of vapor phase carbon adsorption technology in the chemical industry. The majority are to capture organic vapors from non-condensable gas streams, such as process exhausts. Other applications include process gas separations such as the removal of oxygen from air in the production of nitrogen. This article focuses on the capture of organic vapors from ...


    By AMCEC Inc.

  • Ammonium, nitrate, and total nitrogen determination in fly ash

    Fly ash is a by-product of the combustion of pulverized coal and is composed of small particles. The composition of the fly ash may vary considerably, however, all fly ashes contain substantial amounts of silicon dioxide (SiO2), aluminum oxide (Al2O3) and calcium oxide (CaO). Nowadays, air pollution control standards require a separation of flue gas before being released to the atmosphere. Fly ...


    By BÜCHI Labortechnik AG

  • Common Treatment Technologies for Fuels in Ground Water, Surface Water, and Leachate

    It may be necessary to know other subsurface information to remediate fuels in ground water. Treatability testing to characterize contaminant biodegradability and nutrient content may be needed for any biodegradation technology. A subsurface geologic characterization would be particularly important to characterize the migration of NAPLs. Recovery tests are usually necessary to design a ...

  • Nation’s Largest Tank Barge Company case study

    The Problem: The Nation’s largest tank barge company is a centralized treatment facility that receives oily wastewater from barges and ships that transport oil and petroleum products. The wastewater is highly loaded with BOD, COD, TSS and oil and they were seeking a direct discharge permit. The Solution: In 2010, Ecolab partnered ...


    By BioprocessH2O

  • Aerator solution for WWTP

    IN 1990, CIRCUIT ENGINEERING began importing the Aire-02 Triton Aerators from the United States. With over 60 000 installations of the Air-02 Aerators currently in operation worldwide, Aeration Industries is one of the world's leading aerator companies. This month. Water&Sanitation Africa spoke to Ryan Beswick, director of Circuit Environmental Engineering, to find out more about these ...

  • Breathe easy: The importance of emission reduction and energy efficiency

    Breathe easy Blue oil mist is an unwelcome by-product of industrial work in the energy sector. contec specialises in high-powered, energy efficient and environmentally friendly oil mist filtration systems that reduce health risks and are an inexpensive alternative to traditional exhaust piping. The high concentrations of blue oil mist produced by industrial ...

  • Maintain a Healthy Workplace with Oil Mist Collectors

    Many machining shops use a variety of metal working fluids, which support the creation of the metal components. During the creation process, lubricants and coolants get converted into vapors, aerosols and mist, which can be very harmful to workers who work in the facility. The inhalation of metal working fluids can lead to a number of medical conditions, which includes irritation of the eyes, ...


    By ProVent, LLC

  • Recycling of Cars Made Green and Cleaner with Verderflex Peristaltic Pumps

    At the end of its’ life, a car yields on average, 140 kilos of shredder waste: 26 kg of metals, 69 kg of plastics, 11 kg of minerals and 24 kg of fibres. In Tiel, Netherlands, a Post Shredder Treatment plant (PST) was built in 2011, for the recycling of cars. The PST plant is one of the two plants in Europe that are able to recycle to approximately 95% of the waste materials. ...

  • X-Ray Fluorescence-Based Multi-Metal Continuous Emission Monitor

    ABSTRACT: Army demilitarization incinerators will need to comply with the Hazardous Waste Combustor National Emission Standard for Hazardous Air Pollutants that will regulate metals and metal compounds listed under the Clean Air Act Amendments. A large problem for these incinerator operations is limited knowledge of the type and quantity of emitted metals, so that compliance may be determined ...

  • Aluminum Manufacturing Industry - Pollution Prevention Guideline

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you