aluminium scrap Articles

  • Case study - Aluminium Scrap Decoating US Granules (USA) 2001

    HCl emissions reduced from 1000mg/Nm3 to 5mg/Nm3.  Process: To recover aluminium scrap from plastic foil. A Glosfume high temperature ceramic filter system replaced an existing bag filter that had suffered severe corrosion. This was due to being operated at low temperatures, combined with extremely high HCl levels, during aluminium scrap decoating. Lime injection ...


    By Glosfume

  • The case of disappearing aluminium

    It’s a mystery that would have exercised the ‘little grey cells’ of Agatha Christie’s super-sleuth Hercule Poirot: considerable volumes of scrap are becoming ‘lost’, and it is unclear whether the disappearance is real or simply the result of flawed statistics. This issue and others of relevance to the worldwide aluminium recycling industryare debated in the following article, which is based on ...


    By Recycling International

  • New ISRI scrap specifications

    The Institute of Scrap Recycling Industries (ISRI) says it has updated the 2007 Scrap Specifications Circular with revisions to three non-ferrous specifications and the addition of a new specification. The new specifications has become effective on November 19th 2007. The ISRI’s Board of Directors approved recommendations from the Non-Ferrous Division to revise following specifications during ...


    By Recycling International

  • Case study - Smelting of Secondary Aluminium (UK)

    Filtration for induction smelting of aluminium scrap Coleshill Aluminium Ltd purchased their first ceramic filter from Glosfume in 1994. Since then, we've developed a close working relationship and over the past 18 years, Coleshill have purchased four filter units, most recently in 2005. During induction smelting, contaminated aluminium scrap is converted into ingots and the ...


    By Glosfume

  • Strategies To Cope With A Drop In The Prices Of Scrap Metal

    Even though a drop in the price of scrap metal can be frustrating, it is something that we cannot control and, therefore, have to live with. When the market appears to be dropping or is simply not performing well, there are some strategies that we can employ to cope with the strain. We have outlined some of these in the list below for your convenience. ...


    By Highett Metal Pty Ltd

  • Significant increase in the value of aluminium swarf thanks to briquetting process - Case Study

    The GLEICH group increases its profitability by compressing 3,800 tonnes of swarf each year Should you just send the metal swarf created during manufacturing to the scrap dealer or should you increase its value by selling it for profit? The GLEICH group discovered the answer to this around ten years ago. Since then, the family-run business has been turning its aluminium swarf into ...

  • Recycling is not garbage: market agents and municipal recycling in New York City

    Regulatory mechanisms for post-consumer recycling have come under criticism over the past decade. This essay considers the perceived flaws of New York City's recycling programmes and offers a discussion of the role one set of market agents, scrap material dealers, has played (both since the 19th century and presently) in closing industrial loops may illuminate the strengths and limitations of ...


    By Inderscience Publishers

  • Pioneers within WEEE recycling

    In a scrap yard in Switzerland right in the middle of the beautiful Alps you can find one of Eldan Recycling’s most cherished and faithful customers – Cablofer Recycling SA. Cablofer was actually one of the first companies within the WEEE-recycling industry. Cablofer Recycling SA is a scrap metal processor dealing with ferrous and non-ferrous scrap on a 40'000 m2 plot in Switzerland. ...


    By Eldan Recycling A/S

  • Engine Crushers – Making A Profit Out Of Old Cars

    Engine crushers make recycling engines quicker and economical.  The purpose of an engine crusher is to reduce engines and gearboxes into small particles.  This makes sorting aluminium from ferrous metals more efficient.  Challenger Group Engine crushers are available in large ...


    By Challenger Group

  • Aurubis, Lünen, Germany - Case Study

    In 2008, Aurubis AG, headquarters in Hamburg, Germany, became the first company to implement TOMRA Sorting’s comprehensive electronic scrap process – a recycling solution which has since been deployed in a variety of custom formats by a number of other recycling plants. ...


    By TOMRA Sorting GmbH.

  • New jobs set to strengthen recycling enterprise

    Leeds-based U Can Recycling is set to double its workforce in the coming year as demand for its specialist services grows. The not-for-profit social enterprise plans to expand its presence in the regeneration area of Harehills and employ another 10 staff in 2013. A dedicated computer and IT waste recycling centre in Leeds, U Can is also set to quadruple its turnover from the previous year. Part ...


    By UCan Recycling

  • REDWAVE Metal Days 2015 - Review

    The REDWAVE Metal Days, at BT-Wolfgang Binder in Gleisdorf, pro­vided the context for international experts from various sectors of the metal and aluminium recycling in­dustry to exchange information on markets, technologies and practical experience. In addition, the new REDWAVE XRF-M sorting system, for recycling in the metals sector, was presented to the participants. ...

  • Waste Gas in Metal Recycling: Hydrocarbons and carbon monoxide - Case Study

    Example: Aluminium recycling Similar tasks: Recycling of copper, lead, cink The waste gas in metal recycling usually contains particles (abraded metal, mineral dust), inorganic, acid substances (HF, HCI, SOx) and dioxins (PCDD/F) as well as a whole range of organic substances (unburned hydrocarbons) and carbon monoxide. Particularly, in the group of unburned ...

  • The true value of magnetic separators and metal detectors in bulk handling

    Introduction The purpose of a bulk material handling may be to transport material from one of several locations to an ultimate destination or to process material such as ore in concentrating and smelting or handling materials for manufacturing. The handling of dry materials in loose bulk form involved the extensive use of static machinery such as belt conveyors, screw conveyors, and various ...


    By Eriez Magnetics Europe Ltd

  • Paint Stripping Using Plastic Media: Carstrip

     Carstrip Pty Ltd has established a dry process for stripping paint from motor vehicles undergoing panel repairs or restoration. The process uses ground plastic media in a sandblasting-type process to remove the paint from the vehicle without damaging the metal. The process has eliminated the generation of waste sludge associated with chemical stripping processes, and has reduced the labour ...


  • Renishaw additive manufacturing expertise revives Hawker Typhoon - Case Study

    Global engineering technologies company Renishaw has helped bring a national treasure back to Gloucester. Using original 1938 drawings, the company worked with the Jet Age Museum to additively manufacture (3D print) four sets of unusual cockpit brackets for a Hawker Typhoon aircraft, built almost exclusively in the UK city during the 1940s. Using original drawings from ...


    By Renishaw plc

  • Baseline Projections of Selected Waste Streams

    Abstract Waste represents an enormous loss of resources both in the form of materials and energy. Indeed, quantities of waste can be seen as an indicator of the material efficiency of society. Waste generation is increasing in the European Union, and amounted to about 3.5 tonnes of solid waste per person in 1995 (excluding agricultural waste) 1 Excessive quantities of waste result from: ...

  • Ideally, data should end up in the shredder - Case Study

    When new computers are needed, companies often need to delete sensitive data reliably from many thousands of old computers - a time-consuming job. Thanks to the HDS 230 hard drive shredder from HSM, Uriel Papierrohstoffe GmbH in Diez (Limburg) can provide their customers with fast and extremely secure data deletion by mechanically shredding hard drives into many particles. Andreas ...


    By HSM GmbH + Co. KG

  • Ideally, data should end up in the shredder - Case Study

    When new computers are needed, companies often need to delete sensitive data reliably from many thousands of old computers - a time-consuming job. Thanks to the HDS 230 hard drive shredder from HSM, Uriel Papierrohstoffe GmbH in Diez (Limburg) can provide their customers with fast and extremely secure data deletion by mechanically shredding hard drives into many particles. Andreas Uriel, the ...


    By HSM GmbH + Co. KG

  • Whatever happened to ... Fall of the House of Philip

    In December 2007 Robert Waxman, a former Philip Services Corp. (PSC) executive in charge of the scrap metal recycling division in Hamilton, Ontario, reached a settlement with the Ontario Securities Commission (OSC) that included a 20-year ban from serving as an officer or director of a public company, a 10-year ban from trading in securities, and a fine of $125,000 towards the OSC's costs. The ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you