aluminium separation Articles

  • Recycling aluminium explained

    A major magnetic equipment manufacturer has successfully solved numerous Aluminium Recycling problems world wide. Master Magnets Ltd is a world leader in the field of Metal Separation applications, they are now willing to share the secrets behind their success. The recycling of aluminum generally produces significant cost savings over the production of new aluminum even when the cost of ...


    By Master Magnets Ltd

  • Development of Technology for Separation of Aluminium Oxide from Ash and Slag of Kuzbass Thermal Power Plants

    Abstract The paper presents a joint research made by the Siberian State Academy for Mining and Metallurgy and the Institute of Metallurgy and Concentration of the National Academy of Sciences, Kazakhstan, on separation of aluminum oxide from ash and slag of Kuzbass thermal power plants. This work is an integral part of 'The Development of a Technology for Deep Processing of Waste from Thermal ...


  • Synthesis and photoluminescence properties of nanocrystalline terbium aluminium garnet phosphor

    Nanocrystalline terbium aluminium garnet phosphor has been prepared by the calcinations (800-1600°C) of the precursor obtained by sol-gel technique. The particle size measurements and SEM analysis of the as prepared powder show the grain size variation in 50-600 nm range. XRD and FTIR measurements show the development of better crystalline phase with increase in the sintering temperature. ...


    By Inderscience Publishers

  • Removal of nitrogen and carbon organic matter by chitosan and aluminium sulphate

    River and lake waters were separated into four fractions to study the removal of nitrogen and carbon organic matter using chitosan (CH) and aluminium sulphate (AS). The fractions were very hydrophobic acid, slightly hydrophobic acid, charged hydrophilic acid and neutral hydrophilic. The results showed that the whole and fractionated water from both sources have a markedly hydrophobic character. ...


    By IWA Publishing

  • Recovery of aluminium alloys and some valuable salts from Spent Bottle Covers

    This work provides a method to prepare standard Al-alloy(s) and some salts of market value from Spent Bottle Covers (SBCs). Aluminium covers were separated from others made of iron or plastic by magnetic and flotation techniques. The aluminium covers were melted under flux. Metals went into the slag were leached using hydrochloric acid. Results obtained revealed that the removed paint decomposed ...


    By Inderscience Publishers

  • Optimal heat-reversible snap joints for frame-panel assembly in aluminium space frame automotive bodies

    This paper presents a method for designing heat-reversible snap joints, locator-snap systems that detach non-destructively by heating a certain location of parts. It is expected to dramatically improve the recyclability of aluminium space frame (ASF) bodies by enabling clean separation of frames and body panels. Extending our previous work on the sequential design of the locators and heating area ...


    By Inderscience Publishers

  • Land application of Water Treatment Residuals: effect on wheat yield and the availability of phosphorus and aluminium

    Water Treatment Residuals (WTR) can be a potential source for available phosphorus (P) and Al, but the influence of WTR rates on the dynamics of available P and Al and plant uptake in alkaline soils are not well documented. Our objective was to evaluate the effects of WTR (Alum-sludge) on the agronomic performance of wheat crop grown in alkaline soils as well as P and Al availability and ...


    By Inderscience Publishers

  • The true value of magnetic separators and metal detectors in bulk handling

    Introduction The purpose of a bulk material handling may be to transport material from one of several locations to an ultimate destination or to process material such as ore in concentrating and smelting or handling materials for manufacturing. The handling of dry materials in loose bulk form involved the extensive use of static machinery such as belt conveyors, screw conveyors, and various ...


    By Eriez Magnetics Europe Ltd

  • Separation of finely dispersed sorbents from purified water by ultra-flocculation and turbulent micro-flotation

    This paper describes studies of the process of recovery of finely dispersed sorbents from water by means of ultra-flocculation, sedimentation and turbulent micro-flotation, and the sequential combination of these steps. With reference to the most commonly used finely dispersed sorbents in the purification of water from organic contaminants, heavy metals and radio nuclides (aluminium hydroxide, ...


    By Inderscience Publishers

  • Pet Recycun6 Plant Opens in Germany

    German plastics recycling company TM Recycling has invested about €10 million ($13.4 million) to build a new PET plastics recycling facility. Construction of the plant is associated with the formation of PFR Nord GmbH in Hohenwestedt TM Recycling, along with AFA Nord GmbH, are a part of the German company Mensing Group, headquartered in Germany. The facility has been operating since June ...

  • Master Magnets introduce the `R` type

    Eddy Current Separators are one of the most widely used types of magnetic separation equipment in the world today and are being increasingly used in various industrial applications for the separation of non-ferrous metals, such as aluminium and copper, from various types of product. Applications that often call for Eddy Current Separators include the separation of aluminium from crushed glass, ...


    By Master Magnets Ltd

  • Naturally endowed oxide nanoparticles from carbon ash in Saudi Arabia

    Chemical analysis of carbon ash powder obtained from water desalination plants in Saudi Arabia has revealed that 84.3% of the ash is pure carbon while the remaining percentage is combinations of oxide materials, mainly silicon and aluminium. These oxides were extracted by sintering the ash powder at 900°C. Shape and size of the obtained oxide powder were determined by transmission electron ...


    By Inderscience Publishers

  • Sorting plants for industrial waste, location: south of Germany

    Task Separation and sorting of industrial and building site waste as well as bulky refuses. Potential recyclables such as wood, paper, plastics, metals and aluminium shall no longer be sent to garbage incineration, but can be recycled after the sorting into different material fractions. Solution Conception and realisation of a complete  industrial waste ...


  • Sorting plant for light packaging material, location: Madeira

    Task New conception of an automatical light  packagings sorting plant for production of marketable potential recyclables, as there  are: PET, PE, bricks, FE, Aluminium, paper  and cardboard. Solution The bags with the light packagins are opened  in a bag opener. Afterwards all troubling substances are taken out. A downstream  ballistic ...


  • In situ preparation of nanocomposites by surface treatment of titanium dioxide particles with a layered double hydroxide

    It is difficult to incorporate nanoparticles in a matrix because the huge number of particles and their enormous surface area dictate that one must expend large amounts of energy in dispersing them and one must find ways to maintain their separation because their surface chemistry is often sufficiently different from the matrix that flocculation via phase separation must be overcome. In many ...


    By Inderscience Publishers

  • New PET recycling plant at PFR Nord

    The Mensing Unternehmensgruppe in Hohenwestedt (Germany) invests almost 10 million Euros in the construction of a new PET recycling plant. The construction of the recycling plant is associated with the new foundation of the PFR Nord GmbH in Hohenweststedt, where almost 30 new workplaces have been created. Altogether, the Mensing Group, which also includes the AFA Nord GmbH and the TM Recycling ...

  • Sorting plant for domestic waste and light packagings, location: Spain

    Task Automation of the excisting sorting line for light packagings and optimisation of the processing  line for domestic waste (organic part).  The throughput rates of both lines shall be  considerably increased upgrading the quality  of the compost and recovering a higher proportion of light packagings at the same  time. Solution ...


  • HF Emission from Dubal`s Electrolysis Cell

    Abstract The overall goal for this paper is to gain better understanding of the environmental aspect of the aluminium smelting cell. It encompasses a study of the relative contributions of operational practices, duct flow, alumina feeding and ambient conditions to the overall HF generation and the different categories of emission distribution between the recycle system, the pot room roof and the ...


    By Boreal Laser Inc.

  • The Magnetic Duo

    (From Resource Recycling) The combination of high gradient magnetic separation using rare earth roll magnets and eddy current separation has proved to reliably remove aluminum flakes mixed with PET. Recycling of plastic beverage containers made from polyethylene terephthalate (PET) has been a growth industry for the past two decades. Recycled PET can be used in such diverse products as ...

  • Pilot-scale studies on the treatment of tannery effluents by electroflotation

    A pilot-scale electroflotation system with a treatment capacity of 0.8 m³ per hour has been designed and built. The system is equipped with a conditioning tank, a rectifier, flow meters, an energy meter and pumps. Iron, aluminium and titanium coated with oxides of tantalum, ruthenium and iridium were used as electrodes. The system was installed within the premises of the Common Effluent Treatment ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you