ambient air ammonia measurement Articles

  • Measuring concentrations of ammonia in ambient air or exhaust air stream using acid traps

    Received for publication May 1, 2008. Strong acid solutions have been widely used in acid traps to determine concentrations of ammonia in ambient air or exhaust air stream. A literature survey indicates the method has a long history and a wide variation in use. Through a series of studies, this paper examines several factors including volume of the acid, depth of the acid, and airflow rate; that ...

  • Air quality in Europe — 2011 report

    The present report provides an overview and analysis of air quality in Europe. The analysis covers up to 38 European countries (EEA-38) (1) and spans the two decades of data that countries have made officially available up to 2009. The evaluation of the status and trends of air quality is based on ambient air measurements and data on anthropogenic emissions and trends. Emissions of the main air ...

  • Air quality in Europe - 2014 report

    Despite considerable improvements in the past decades, Europe is still far from achieving levels of air quality that do not pose unacceptable risks to humans and the environment. Air pollution is the top environmental risk factor of premature death in Europe; it increases the incidence of a wide range of diseases and has several environmental impacts, damaging vegetation and ecosystems. This ...

  • Air quality in Europe — 2013 report

    Air quality continues to be a very important issue for public health, the economy and the environment. Europe has significantly cut emissions of several air pollutants in recent decades, greatly reducing emissions and exposure to substances such as sulphur dioxide (SO2), carbon monoxide (CO), benzene (C6H6) and lead (Pb). Despite improvements over several decades, air pollution continues to ...

  • Air quality in Europe — 2015 report

    Air pollution is both an environmental and a social problem, as it leads to a multitude of adverse effects on human health, ecosystems, the built environment and the climate. Air pollution poses the single largest environmental health risk in Europe today. Air pollutants are emitted from anthropogenic and natural sources; they may be transported or formed over long distances; and they may affect ...

  • Every breath you take — air quality in Europe

    The characters in this story are fictional. However the data are real. The story is set on 27 July 2008 when an air quality warning was issued in Brussels. Anna is 37 years old and lives in the centre of Brussels. She and her young son Johan are planning a trip outside the busy city. Anna suffers from asthma and her doctor has warned of the dangers of air pollution, especially on hot summer days. ...

  • A preliminary review of gas-to-particle conversion monitoring and modelling efforts in the USA

    Ammonia and inorganic acid gases emitted from livestock and poultry operations, manure treatment, handling and application can affect air quality by the formation of secondary fine particles. The process of gas-to-particle conversion (GTPC) of relatively short-lived gaseous ammonia to more persistent fine particles can affect local and regional air quality far away from the agricultural sources. ...


    By Inderscience Publishers

  • Online Odors Monitoring in Waste Water Treatment Plants

    Odors are very distinct air contaminants as they generate nuisances (see note at the end). The factors playing a role in the determination of odor annoyance are : odor concentration and intensity, frequency, appreciation, duration, synergy and location. Chromatotec proposes an automated solution to well identify the origin and the level of odors. Technology Description We offer a ...


    By Chromatotec Group

  • Laser Gas Detector LGD F200

    Laser gas detection with innovative, easy-to-integrate OEM modules Diode Laser based gas detection gains increased interest in the industry as it offers significant benefits in terms of selectivity, stability and low maintenance. Axetris provides innovative gas detector modules as basis for extractive process control systems and for continuous emission monitoring systems (CEMS). The ...


    By Axetris Ag

  • Monitoring Environmental Quality

    ' In order to determine the effectiveness of actions to improve environmental quality it is necessary to be able to measure relevant environmental parameters at a level of detail which is accurate enough to distinguish the anticipated changes. However, the establishment and maintenance of monitoring systems is time-consuming and expensive and therefore the scale of such systems needs to be kept ...


    By The World Bank

  • The power of prevention

    Most people already try to eat well to avoid gaining weight. They keep active to avoid getting rusty and they swallow vitamins to stave off colds… the power of prevention is ingrained in the majority of people, and they wholeheartedly follow the latest fads to keep up with society. But how much more could people do to prevent getting sick? A lot more, it turns out. The more people know, ...


    By Allerair Industries

  • Reducing Odor and VOC Emissions

    The Montgomery County Regional Composting Facility (MCRCF) in Silver Spring, Maryland is designed to process 400 wet tons/day of lime amended biosolids from the Blue Plains Wastewater Treatment Plant (WWTP) in Washington, D.C. Recently, political pressures forced operations to cease at the MCRCF. Although the aerated static pile composting plant’s fate has not been completely decided, its owner, ...


    By BioCycle Magazine

  • Controlling Odors at Composting Facilities

    Untitled Document ...


    By BioCycle Magazine

  • Case Study: Odor Abatement Solutions

    Odor issues related to industrial processes are not uncommon.  An odor is caused by one or more volatilized organic compounds (VOCs) that humans can perceive by the sense of smell.  The challenge is that “odor is subjective, and what is sweet to some, can be a nuisance to others.   In most cases the ...

  • Navigating NSPS subpart Db for boilers: a case study

    Over the past year, Trinity assisted a chemical company with the permitting and installation of a new 220 MMBtu/hr package boiler. The new natural gas-fired boiler replaces coal-fired units that were installed in the 1940s. Navigating through the numerous, and at times conflicting, regulatory requirements applicable to such a unit has been challenging. With careful planning and implementation, ...


    By Trinity Consultants

  • A Guide to Gas Detector Tubes. Your Questions Answered

    Gas detector tubes are easy to use, are low cost, and the method is intrinsically safe, allowing it to be deployed in all industries. Because detector tubes don’t require calibration, users see the benefits of this technology over electronic gas detectors due to their ease of ...


    By a1-cbiss

  • Not All Hazards are the Same: Design considerations for matching flame and gas hazards to detector technologies

    Not all flame and gas hazards in facilities are the same, therefore the detection technology chosen should be specific to the type of hazard to be detected. How do users select technologies to see certain fires or detect certain gases? The intent of this paper is to give a broad introduction to the selection and use of flame and gas detector technologies. We will answer questions such as these: ...

  • Ask Enhesa Vol. 6

    Featuring contributions from Gabriela Troncoso, Katsiaryna Anoshka, Elise Saade, Kengo Okuda, Paige Samson, Caitlin O’Sullivan, Ruth White and Wassila Nabourema and Tjeerd Hendel-Blackford ...

  • Flying High

    Operating a biogas plant without gas quality and flow instrumentation is like trying to fly a ...


    By Gas Data Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you