ambient gas monitoring Articles

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...

  • Ambient Air Sampling Methods

    Pollutants are nothing but any substance that may present in an atmosphere in such a concentration that it may harmful to surrounding, living organism or human being. Sampling and analysis of air pollutants is known as Air quality monitoring and it is major part of environmental monitoring. There are many advanced types of ambient air Sampling methods. we will learn here only which are most ...


    By Perfect Pollucon Services

  • Gas Detection and Monitoring Systems

    In greenhouse applications, the accurate measurement of a number of environmental parameters such as carbon dioxide concentration, temperature, light intensity, water, humidity, pH and nutrient levels using sophisticated sensors is used to create a controlled environment for optimising plant growth rates while minimising energy usage. Carbon dioxide concentration is also one of the best ...


    By Edinburgh Sensors Ltd

  • Case study - Ambient air monitoring by PID detection - airTOXIC

    First Case THE PROBLEM: How to monitor air quality from 1 spot in 12 different towns ? THE SOLUTION The airToxic PID with the communication protocol MODBUS allows to transfer the results of the 12 instruments to a central room RESULTS airToxic PID allows to have an improved ...


    By Chromatotec Group

  • Laser gas detector systems for greenhouse gas emissions monitoring

    Two types of portable laser based gas detector for measuring emissions of the greenhouse gases carbon dioxide (CO2) and methane (CH4) from oil and gas operations are described. A scanning open path detector was developed within a Cooperative Research and Development Agreement (CRADA) with the USEPA. This system scans multiple paths across an area source in rapid succession, enabling calculation ...


    By Boreal Laser Inc.

  • Why measuring the ambient NO2 without conversion?

    Nitrogen oxides NOx are pollutants that may have particular impact in terms of greenhouse gases, acidifying air etc ... issuance increased significantly since 1950 with the massive development of transport and industries. It therefore becomes necessary to provide measures always safer these pollutant gases, and to know the reliability of results. Currently, 60% of emissions of NO and NO2 are ...


    By ENVEA

  • Gas Chromatography: MCERTS Certification for Ambient Air Analysis on Benzene and VOCs

    Due to environmental issues, the world of gas analysis is evolving very rapidly.Governments set the rules to limit and control the environmental pollution through legislation.Volatile organic compounds (VOCs),often produced by human activities, are amongst the sources of pollution that need to be identified and quantified for safety reasons. Exposure to high concentrations of certain VOCs is ...


    By Chromatotec Group

  • Critical Monitoring of Forklift Emissions and Warehouse Ambient Air Quality - Case Study

    Our team of experts has been hard at work and has just released an industry-leading report detailing Forklift Emissions in Warehouses: The main objectives of this study were to investigate the effects of different engine conditions on exhaust gas emissions and to observe the effect that forklift emissions have on the ambient air quality of the warehouse.             ...

  • Gas Concentration Monitoring in Sulfuric acid production

    Sulfuric acid (H2SO4) is a central substance in the chemical industry. Principal uses include mineral processing, fertilizer manufacturing, oil refining, wastewater ...


    By Opsis AB

  • Gas Monitoring for Ventilation Control and Energy Management

    The growing demand for underground and enclosed parking and maintenance garages (resulting from limitations on land availability) has increased the awareness and need for proper ventilation and control systems. In addition, increased health and safety programs have only added to the concerns of toxic and combustible gases in confined or enclosed spaces. Historically, ventilation and make-up air ...


    By Arjay Engineering Ltd.

  • Pneumatic Focusing Gas Chromatography: A 3-in-1 Continuous, Automated, Ambient-Fence line-Fugitive Emissions Instrument

    This project involved design improvements in both software and hardware, and commercialization of our Pneumatic Focusing Gas Chromatography technology for continuous monitoring of VOCs and Air Toxics and demonstration of its performance in year-long monitoring programs at an EPA Superfund site in Fargo North Dakota and an Oregon Department of Environmental Quality Air Toxics site in Portland ...


    By VOC Technologies

  • TDLAS Gas Detection Instrumentation

    PKL Technologies Inc. manufactures tunable diode laser (TDLAS) based gas detectors and monitors. Spectra-1 open path gas sensors are used in a variety of environmental and safety remote sensing applications. Spectra-1 gas sensors have been designed in a compact, easy to use, robust and portable format. Spectra-1 has been developed using proprietary hardware and software, to produce a low cost ...


    By PKL Technologies Inc.

  • A Comparison of Point Sensors and Open Path Monitors For Toxic Gas (esp. HF) Monitoring

    Point Sensors Ion Mobility Spectroscope (IMS) – a gas sample is ionized by a radioactive source (Ni63). Differences in ion drift under the influence of an applied electric field produce a spectrum that is dependent on the mass, charge, and shape of the component ions. The detector signal and strength is tuned to the drift time of the ion of interest (in this case HF) and signal strength is ...


    By Boreal Laser Inc.

  • Improved HF monitoring in Primary Aluminium Smelters with Laser Gas Detectors

    Primary aluminium smelting generates large amounts of hydrogen fluoride gas (HF). Concerns for worker safety and ambient air quality require that HF be monitored at several locations in smelters. Historically, a variety of methods have been used for HF monitoring. Cassette samplers and wet chemistry techniques, coupled with complex and expensive ...


    By Boreal Laser Inc.

  • A preliminary review of gas-to-particle conversion monitoring and modelling efforts in the USA

    Ammonia and inorganic acid gases emitted from livestock and poultry operations, manure treatment, handling and application can affect air quality by the formation of secondary fine particles. The process of gas-to-particle conversion (GTPC) of relatively short-lived gaseous ammonia to more persistent fine particles can affect local and regional air quality far away from the agricultural sources. ...


    By Inderscience Publishers

  • An ambient indoor air environment is vital to ensure a safe and healthy workplace

    Indoor air quality (IAQ) relates to a number of environmental factors inside a building that can impinge on the health, comfort, or work performance of the building’s occupants. Monitoring IAQ is vital because it is estimated that the average person spends 90% of their time breathing “indoor air”. Poor IAQ is a contributing factor to both short and long-term health issues, these ...


    By PPM Technology

  • Development of on-line and field dual TD-GC-FID/MS for automatic and continuous ambient air monitoring

    Ambient air is polluted by many Volatile Organic Compounds (VOCs) coming from anthropogenic and natural sources. VOCs from PAMS, TO14 and TO15 lists can be measured in many ranges of concentration, from ng/m3 up to mg/m3 depending on the location of the measurements. Due to the large number of molecules, the complete separation of all compounds is difficult to perform using chromatographic ...


    By Chromatotec Group

  • Area Monitoring: Diffusion Sampling

    Indoor and outdoor gas hazards that exist in open areas are usually monitored using diffusion-type sensors. A diffusion sensor has no active sample-drawing system; diffusion sensors rely on the ambient air movement and pressure to deliver the sample to the sensing element. Diffusion-type sensors are a reliable and cost-effective way to monitor open area gas hazards. When installing diffusion ...

  • Development of on-line and field dual TD-GC-FID/MS for automatic and continuous ambient air monitoring

    Ambient air is polluted by many Volatile Organic Compounds (VOCs) coming from anthropogenic and natural sources. VOCs from PAMS, T014 and T015 lists can be measured in many ranges of concentration, from ng/m3 up to mg/m3 depending on the location of the measurements. Due to the large number of molecules, the complete separation of all compounds is difficult to perform using chromatographic ...


    By Chromatotec Group

  • Comparison of indoor air quality in restaurant kitchens in Tehran with ambient air quality

    Air pollution is a major environmental health problem, affecting developed and developing countries around the world. Although the indoor air database is weak due to the scarcity of monitoring results, these estimates indicate that a serious indoor air problem may exist in developing countries. In developed countries, pollutant concentrations indoors are similar to those outdoors, with the ratio ...


    By University of Tehran

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you