ambient pollution monitoring instrument Articles

  • Understanding ambient air quality instrument operating ranges

    In order to maximize the performance of an air quality monitoring station, careful selection of instrumentations is essential. One of the key issues is to have a good understanding of what pollutants need to be measured and at what concentrations. There are several different types of air quality monitoring, these include: Trace/Background Monitoring This is performed in areas where ...


    By Ecotech Pty Ltd

  • Operating Experience with a Near-Real-Time Ambient Airborne Metals Instrument System

    Airborne Metals Instrument System Cooper Environmental Systems Xact 620) National Ambient Air Monitoring Conference, Nashville, Tennessee November 2-5, 2009 Missouri Department of Natural Resources, Air Pollution Control Program and Environmental Services Program Washington University, St. Louis U. S. EPA Project Plan Phase I. ...

  • Tekran instruments—monitoring around the world

    Tekran provides trace-level mercury analytical and monitoring technology for a variety of applications including laboratory-based sample analysis, continuous point-source emissions and ambient air monitoring. This article focuses on and highlights the results of an application of Tekran’s Ambient Air Mercury Speciation System. In contrast to most other heavy metals, mercury (Hg) and mercury ...

  • Case study - Ambient air monitoring by PID detection - airTOXIC

    First Case THE PROBLEM: How to monitor air quality from 1 spot in 12 different towns ? THE SOLUTION The airToxic PID with the communication protocol MODBUS allows to transfer the results of the 12 instruments to a central room RESULTS airToxic PID allows to have an improved ...


    By Chromatotec Group

  • Why measuring the ambient NO2 without conversion?

    Nitrogen oxides NOx are pollutants that may have particular impact in terms of greenhouse gases, acidifying air etc ... issuance increased significantly since 1950 with the massive development of transport and industries. It therefore becomes necessary to provide measures always safer these pollutant gases, and to know the reliability of results. Currently, 60% of emissions of NO and NO2 are ...


    By Environnement S.A

  • Measurement of Toxic and Related Air Pollutants - Field-Emplaceable Air Samplers for Automated Ambient, Site, and IAQ Use (Including TO-17 Applications)

    Abstract Air samples taken on collection media for laboratory analysis remain a highly sensitive and cost-effective means of assessment. However, collection of samples can be difficult using nonautomated samplers, particularly over long terms or at remote locations. This paper describes a number of automated air samplers for sorbent-tube and filter use. The samplers are batterypowered, portable ...


  • Air pollution – the invisible roadside killer

    The VW emissions scandal has helped to raise awareness of the deadly threat posed by air pollution in many of our towns and cities. In the following article, Jim Mills, Managing Director of Air Monitors, an instrumentation company, explains why diesel emissions will have to be lowered and how the latest monitoring technology will be an essential part of the solution. ...


    By Air Monitors Ltd.

  • Elemental composition of ambient aerosols measured with high temporal resolution using an online XRF spectrometer

    Markus Furger1,*, María Cruz Minguillón2, Varun Yadav3, Jay G. Slowik1, Christoph Hüglin4, Roman Fröhlich1, Krag Petterson3, Urs Baltensperger1, André S. H. Prévôt1 1Laboratory of Atmospheric Chemistry, Paul Scherrer Institute, 5232 Villigen 5 PSI, Switzerland 2Institute of Environmental Assessment and Water Research (IDAEA), Consejo Superior de ...

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...


    By Pollution Srl

  • Analytical Support for Cost-Effective Pollution Control

    ' Analytical tools have been developed by the World Bank Group to estimate rapidly the extent and impacts of pollution in a given situation and to support decisions on pollution management. These tools help decision makers to overcome the frequent lack of data on emissions from different sources, their impact on ambient quality, and mitigation alternatives.' Decision Support System for ...


    By The World Bank

  • How Accurate is Your Monitor?

    When you consider the many regulations and guidelines that health and safety officers and first responders are faced with, it is amazing they maintain the ability to detect such a wide variety of hazardous pollutants and toxic agents.  There is no lack of regulations governing how to monitor chemical compounds, and the list grows longer all the time.  New standards for portable gas ...

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Air Monitoring for the Gulf Oil Spill

    Ambient air monitoring is a priority in the ongoing efforts to contain and manage the oil spill from the Deepwater Horizon in the Gulf of Mexico. The following provides information about the kinds of airborne contaminants that are currently being monitored in the Gulf, how they are collected and how they are analyzed. For a given project, a suitable sampling plan – developed by ...


  • Designing and Implementing Perimeter Air Monitoring Programs

    Perimeter or fenceline ambient air quality and meteorological monitoring programs have become increasingly valuable at hazardous waste, landfill, dredging, ports, and MGP remediation sites. Air quality monitoring programs protect public health and reduce owner liability ...


    By AECOM

  • The Portable FID for Stack Emissions: lightweight, compact, ergonomic, safe

    POLLUTION S.r.l. manufactures POLARIS FID analyser, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...


    By Pollution Srl

  • A Method of Assessing Air Toxics Concentrations in Urban Areas Using Mobile Platform Measurements

    ABSTRACTThe objective of this paper is to demonstrate an approach to characterize the spatial variability in ambient air concentrations using mobile platform measurements. This approach may be useful for air toxics assessments in Environmental Justice applications, epidemiological studies, and environmental health risk assessments. In this study, we developed and applied a method to characterize ...

  • Simultaneous determination of PM fractions, particle number and particle size distribution in high time resolution applying one and the same optical measurement technique

    Abstract The Fidas fine dust monitoring systems comprise an optical aerosol spectrometer, which is characterized by very good instrument characteristics, and utilize a sophisticated approach to convert the measured information on particle number and particle size into mass concentrations. As monitoring of PM requires reliable and quality-controlled performance of the measuring systems, ...


    By Palas GmbH

  • Environics - Reducing calibration gas cost by up to 60%

    EPA's appendix 'M' 40 CFR 51 reduces calibration gas cost by 60%By: Terrence P. Dunn, President of EnvironicsOn May 30, 1995, the EPA published the final version of Method 205 for inclusion in Appendix M of 40 CFR Part 51 entitled, 'Verification of Gas Dilution Systems for Field Instrument Calibrations.' Continuous emissions monitoring systems (CEMS) require ...


    By Environics, Inc.

  • How to investigate mercury in the oceans?

    Mercury is a highly toxic metal that affects the environment and can endanger people's health, as a powerful neurotoxin. The combustion of coal, waste and fuel are releasing hundreds of tons of heavy metal into the atmosphere annually, and its sediment enters to soil and water. Mercury measurements are part of the EU project "Global Mercury Observation System". The long-term goal of this ...


    By Lumex Instruments Group

  • Introducing a New ASTM Method for the Determination of Total Nitrogen, and TKN by Calculation, in Water Samples

    The USEPA Clean Water Act (CWA) requires national approval for all methods used for CWA compliance. There are approved methods for the determination of inorganic nitrogen (NO3-N, NO2-N, and NH3-N), and for organic nitrogen (TKN – NH3-N)2. There are no EPA approved methods for the determination of total nitrogen although it is a required parameter in many USEPA permits, including monitoring ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you