ammonia emissions monitoring Articles

  • Monitoring NH3, N2O, CO2 and CH4 emissions

    In France, as in other countries, there is a need to improve knowledge of greenhouse gas and ammonia emissions from livestock production with various management options. The aim of this study was to quantify the NH3, N2O, CO2 and CH4 emissions from two pig solid manure heaps, turned and not turned, in order to examine the effect of turning on gaseous emissions and to obtain additional information ...


    By BioCycle Magazine

  • Wastewater Treatment Plant Monitors Greenhouse Gas Emissions

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

  • Minimizing ammonia consumption in DeNOx plants – Case Study

    Flue gas denitrification Combustion processes result in emissions that can be harmful to the environment, in particular carbon dioxide (CO2), sulfur dioxide (SO2), nitric oxides (NOx), and dust. Therefore, measures are implemented in power stations and other plants comprising combustion processes to reduce emissions. For flue gas denitrification, besides front-end primary ...

  • N-Tox® prevents activated sludge failure and monitors greenhouse gas emissions

    A new technique for evaluating nitrification efficiency in industrial and municipal activated sludge systems is described that uses direct measurement of dinitrogen oxide, an important greenhouse gas, as an indicator of nitrification failure. Developed at Water Innovate, N-Tox® helps control ammonia levels in treated effluent by providing an early warning of wastewater treatment failure. The ...


    By Clarity Authoring

  • Wastewater treatment plant monitors Greenhouse Gas emissions - Case study

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

  • PureAire Universal Gas Detector Offers Protection Against Toxic Levels of Ammonia

    In March of 2016, an ammonia gas leak at a seafood processing plant in Boston left one worker dead. The fumes at the plant were so powerful that firefighters could not promptly enter the scene to mitigate the gas leak and try to save the staff member until much later. Reports show that 5,300 pounds of ammonia gas leaked out of the plant. If you work with ammonia at your facility, learn ...

  • Reducing Odor and VOC Emissions

    The Montgomery County Regional Composting Facility (MCRCF) in Silver Spring, Maryland is designed to process 400 wet tons/day of lime amended biosolids from the Blue Plains Wastewater Treatment Plant (WWTP) in Washington, D.C. Recently, political pressures forced operations to cease at the MCRCF. Although the aerated static pile composting plant’s fate has not been completely decided, its owner, ...


    By BioCycle Magazine

  • Application of the EU Emissions Trading Directive

    Synthesising Member State reporting on the ETS The European Union (EU) emissions trading system (ETS) is one of the key climate policy instruments implemented in the EU to achieve its emission reductions objectives in a cost‑effective manner. The EU Emissions Trading Directive (EU, 2003, referred to hereafter as the 'EU ETS Directive'), and in particular Article 21 ...

  • Gas turbine compliance emissions test case study

    CKwas retained by Lake Road Generating Company, LP (Lake Road) to conduct a compliance emissions test program on three combustion turbine and heat recovery steam generators (CT/HRSG). The purpose of this program is to demonstrate that emissions from the CT/HRSGs are within the emission limits specified in the operating permit issued by the Connecticut Department of Environmental Protection ...


    By CK Environmental, Inc.

  • Insitu analysis of ammonia slip and water vapor using a tunable diode laser for SCR/SNCR optimization and boiler tube surveillance in power plants

    ABSTRACT Environmental Regulations driven by the 1990 Clean Air Act require Power Plants to reduce NOx emissions. SCR's and SNCR's reduce NOx emission by injecting ammonia into the combustion flue gas. which ideally reacts with the NOx to form H?0 and Nj. The efficiency of the SCR SNCR is determined by monitoring the outlet for excess NH3. referred to as NH3 slip. The flue gas sample ...

  • NEO Monitors conquers the Quasi-impossible

    China is a world factory powered by its abundant coal resource. China is facing a huge environmental challenge brought together with the fossil-fired power plants. China has therefore been conducting technical retrofit to the engines of its economy, by introducing emission control facilities. Selective Catalytic Reduction (SCR) technology is one of the most widely applied emission control ...


    By NEO Monitors AS

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...

  • Monitoring for the golden balance

    On Herøya in Porsgrunn, Yara has an ammonia plant, three nitric acid plants and a calcium nitrate plant. Together the plants produce a wide range of fertilizers that meet the requirements for fertilization ...


    By NEO Monitors AS

  • Monitoring Environmental Quality

    ' In order to determine the effectiveness of actions to improve environmental quality it is necessary to be able to measure relevant environmental parameters at a level of detail which is accurate enough to distinguish the anticipated changes. However, the establishment and maintenance of monitoring systems is time-consuming and expensive and therefore the scale of such systems needs to be kept ...


    By The World Bank

  • Different emission estimates produced by EU bodies/institutions

    EU GHG inventory submission to UNFCCC (EEA and DG Climate Action) The European Union (EU), as a party to the United Nations Framework Convention on Climate Change (UNFCCC), reports annually on greenhouse gas (GHG) inventories for the years 1990 to X-2 (i.e. two years before the current year1) and within the area covered by its Member States. The legal basis for the compilation of the ...

  • NOx in Non-Utility Industries - Part I NOx in Non-Utility Industries - Part I - Air emission origins, best control solutions and monitoring methodology for nitrogen oxides

     Problems with reducing nitrogen oxides (NOx) are widespread in the general process industries. These industries, together with medium size utility and power generators contribute about 15 percent of global NOx emissions. The emission sources addressed include various heaters employed in chemical and petrochemical plants, nitric and sulfuric acid plants, glass furnaces, iron and steel mills, ...


  • Testing the Performance of a DeNOx System Using a Portable Emissions Analyzer - Case study

    Using Portable Emissions Analyzers to Measure the Performance of a NOxReduction System in a Power Plant Boiler The majority of power plants utilize NOx reduction systems (eg. Ammonia Injection, SCR, etc.) in their power boilers to ensure that the NOx emissions levels comply with current regulations. The frequent evaluation of the ...

  • Evaluation of progress under the EU National Emission Ceilings Directive

    In 2001, the European Community adopted the National Emission Ceilings Directive (NEC Directive). Its objective is to limit the emissions of four important air pollutants in order to achieve the directive's interim environmental objectives concerning acidification and eutrophication in sensitive ecosystems, and health- and vegetation.related exposure to ground-level ozone. Over the past decade, ...

  • Wireless monitoring for a safe indoor environment

    This article discusses the benefits of wireless technology for continously monitoring the indoor environment. In striving for the construction of energy efficient and cost-effective buildings, the imperative issue of the buildings Indoor Air Quality (IAQ) is often overlooked. This can often lead to a unhealthy indoor environment and even to conditions such as Sick Building Syndrome (SBS) or other ...


    By PPM Technology

  • EMEP/EEA air pollutant emission inventory guidebook 2016

    1 Guidebook Introduction 1.1 Introduction The joint EMEP (1)/EEA Air Pollutant Emission Inventory Guidebook (the 'Guidebook'), following the 'Guidelines for Reporting Emissions and Projections Data' under the United Nations Economic Commission for Europe (UNECE) Convention on Long-range Transboundary Air Pollution (LRTAP) (2), provides concise guidance on how ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you