ammonia gas analyzer Articles

  • Detection of moisture in ammonia gas

    Problem Statement As technologies advance, so does the request for ultra high purity ammonia. Ultra high purity (UHP) ammonia is used in the semiconductor industries, production of flat panel displays, and a number of other applications. Due to this rising interest in UHP ammonia, manufacturers are having to battle ammonia’s most prominent and damaging impurity--moisture. For ...


    By CIC Photonics, Inc.

  • Minimizing ammonia consumption in DeNOx plants – Case Study

    Flue gas denitrification Combustion processes result in emissions that can be harmful to the environment, in particular carbon dioxide (CO2), sulfur dioxide (SO2), nitric oxides (NOx), and dust. Therefore, measures are implemented in power stations and other plants comprising combustion processes to reduce emissions. For flue gas denitrification, besides front-end primary ...

  • Global Ammonia Market - Industry Analysis, Size, Share, Growth, Trends And Forecast, 2012 - 2018

    Ammonia, also known as azane, is a compound of nitrogen and hydrogen. It is a colorless gas with a pungent odor. Ammonia is an essential source for many downstream nitrogen based products. It acts as a nutritional supplement in foods and fertilizers. It also has various applications in pharmaceutical industries and in cleansing products. Ammonia is used for commercial as well as household ...


  • NH3 Slip Monitoring in Fluidized-bed Catalytic Cracking Using the LDS 6 Gas Analyzer – Case Study

    Fluidized catalytic cracking (FCC) units are used in refineries to convert low value heavy oils into more valuable lighter compounds. Cracking units are sources of emissions of pollutants (e.g. NOx) and must comply with concentration permits set by local or federal authorithies. Modern technologies are applied to reduce the content of pollutants and to monitor certain gas compounds (here: NH3) in ...

  • Insitu analysis of ammonia slip and water vapor using a tunable diode laser for SCR/SNCR optimization and boiler tube surveillance in power plants

    ABSTRACT Environmental Regulations driven by the 1990 Clean Air Act require Power Plants to reduce NOx emissions. SCR's and SNCR's reduce NOx emission by injecting ammonia into the combustion flue gas. which ideally reacts with the NOx to form H?0 and Nj. The efficiency of the SCR SNCR is determined by monitoring the outlet for excess NH3. referred to as NH3 slip. The flue gas sample ...

  • Online Analyzers Improve Control of Chloramination Processes in Milwaukee

    The Milwaukee Water Works is a national leader in providing high quality drinking water and monitoring water quality. Since 1998, it has invested $227 million in its infrastructure, from treatment plants to distribution systems, to ensure high quality drinking water and reliable supply. The Milwaukee Water Works treats Lake Michigan water with Ozone gas as a primary disinfectant because it ...


    By ASA Analytics

  • Advanced gas analysis - on the go

    The field of ambient air analysis - monitoring industrial and other environments for harmful concentrations of gases - has traditionally faced a technology limitations: Would you prefer a complete and reliable tool, which will be bulky, complicated and inconvenient? Or would you like a nice portable one that's simple and lightweight, but unreliable and limited in its capability? Truly complete ...


    By HHCS Handheld USA Inc.

  • Wastewater Treatment Plant Monitors Greenhouse Gas Emissions

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

  • FTIR gas analysis improves container safety

    Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...


    By Gasmet Technologies Oy

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Process analytics in gas-to-liquid (GTL) plants – Case Study

    NG, FT and GTL Natural Gas (NG) is a vital component of the world's supply of energy. It is one of the cleanest, safest, and most useful of all energy sources. NG is colorless, shapeless, and odorless in its pure form. It is combustible, and when burned it emits lower levels of potentially harmful byproducts into the air than other fuels. NG is a mixture of hydrocarbon gases. While it ...

  • Soil CO2 Flux Measurements -- Using the LI-8100 System to Collect Air Samples for Estimating Soil Trace Gas Flux

    Air samples can be collected from the same air stream used to measure soil CO2 flux with the LI-8100 Automated Soil CO2 Flux System, for estimating the flux of trace gas, such as methane (CH4), ammonia (NH3), nitrous oxide (N2O), isotopic species, etc. This application note describes a simple method for obtaining air samples from the LI- ...


    By LI-COR

  • Not All Hazards are the Same: Design considerations for matching flame and gas hazards to detector technologies

    Not all flame and gas hazards in facilities are the same, therefore the detection technology chosen should be specific to the type of hazard to be detected. How do users select technologies to see certain fires or detect certain gases? The intent of this paper is to give a broad introduction to the selection and use of flame and gas detector technologies. We will answer questions such as these: ...

  • Complete online monitoring solution for Waste Water Treatment Plant

    Due to the increasing number of requests for the monitoring of waste water treatment plant atmosphere, Chromatotec® has designed a specific analytical solution for sulfur and nitrogen compounds analysis. For more than 25 years, Chromatotec® has proven its value and expertise in measuring and recording sulfur concentrations in waste water treatment plant. Chromatotec® has completed its ...


    By Chromatotec Group

  • Online Odors Monitoring in Waste Water Treatment Plants

    Odors are very distinct air contaminants as they generate nuisances (see note at the end). The factors playing a role in the determination of odor annoyance are : odor concentration and intensity, frequency, appreciation, duration, synergy and location. Chromatotec proposes an automated solution to well identify the origin and the level of odors. Technology Description We offer a ...


    By Chromatotec Group

  • Process analytics support higher yields in biogas plants – Case Study

    The production of biogas by means of the anaerobic, microbial breakdown of organic substances in “biogas plants” is growing in significance, especially against a background of increasingly scarce and expensive fossil fuels. The key energy-generating element is methane. Depending on the baseline conditions, biogas also contains small quantities of water vapor, hydrogen sulfide (H2S), ...

  • A new proposal for GHG emissions responsibility allocation: BAT approach

    In recent years, several methodologies have been developed for the quantification of greenhouse gas (GHG) emissions. However, it is equally or more important to determine who is responsible for these emissions. The most common approach is to assign emissions to the producer (based on the Kyoto Protocol), but there are also proposals for its allocation to the consumer (based on an ecological ...


    By John Wiley & Sons, Ltd.

  • Comprehensive Odor Emissions Study Hall Street Wastewater Treatment Plant Concord, New Hampshire

    ABSTRACTThe operation of the Hall Street wastewater treatment plant (WWTP) in Concord, NH has caused the emission of objectionable odors from various liquid and solids treatment processes resulting in periodic odor complaints from its neighbors. The City of Concord retained Fay, Spofford & Thorndike (FST) to conduct a comprehensive odor emissions study at the Hall Street WWTP and to recommend ...

  • Cost Containment: Beyond the Obvious

    Utilities today can implement a number of different initiatives to help them contain costs and maximize profits. Some of those, such as switching to a more efficient fuel source if possible, can produce obvious results that are relatively easy to calculate. But there are other initiatives, though less obvious, that can produce significant results at the bottom line. One such cost-containment ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you