ammonia gas monitoring Articles

  • Detection of moisture in ammonia gas

    Problem Statement As technologies advance, so does the request for ultra high purity ammonia. Ultra high purity (UHP) ammonia is used in the semiconductor industries, production of flat panel displays, and a number of other applications. Due to this rising interest in UHP ammonia, manufacturers are having to battle ammonia’s most prominent and damaging impurity--moisture. For ...


    By CIC Photonics, Inc.

  • Ammonia Vent Line Gas Detector

    The LPT-A Vent Line Ammonia Transmitter (P/N: LPT-A-VLT-NH3-S) is designed for continuous monitoring of ammonia levels in the vent lines of refrigeration systems caused by equipment failure or system over pressurization. Slow leaks of refrigerant can be costly over time and a dangerous situation could present itself if a high pressure release were to occur. The VLT provides continuous, ...

  • The Wonders of Ammonia & Chlorine

    The two most common chemicals found in your home, office and commercial facilities in one form or another are Ammonia (NH3) and Chlorine (Cl2). They are also two of the oldest and most widely produced chemicals in commercial use around the world. Ammonia, a refrigerant by “nature” Refrigeration by mechanical means goes back to the 1800s and ammonia was among the earliest chemicals to ...

  • BUMP TESTING AMMONIA (NH3) SENSORS

    Bump testing a gas sensor involves flowing a concentration of gas that is slightly higher than the Low alarm setpoint of the gas detector for a short period of time (1-2 minutes or less). The purpose of a bump test is to confirm that the sensor responds to the presence of gas, the low alarm will activate and the gas detector overall ...

  • PureAire Universal Gas Detector Offers Protection Against Toxic Levels of Ammonia

    In March of 2016, an ammonia gas leak at a seafood processing plant in Boston left one worker dead. The fumes at the plant were so powerful that firefighters could not promptly enter the scene to mitigate the gas leak and try to save the staff member until much later. Reports show that 5,300 pounds of ammonia gas leaked out of the plant. If you work with ammonia at your facility, learn ...

  • Minimizing ammonia consumption in DeNOx plants – Case Study

    Flue gas denitrification Combustion processes result in emissions that can be harmful to the environment, in particular carbon dioxide (CO2), sulfur dioxide (SO2), nitric oxides (NOx), and dust. Therefore, measures are implemented in power stations and other plants comprising combustion processes to reduce emissions. For flue gas denitrification, besides front-end primary ...

  • Monitoring Multiple Gas Hazards in Ice Arenas

    The equipment used in an arena such as an ice re-surfacer, ice edger, floor sweepers, lift trucks and other special equipment are more often powered by fuel than electricity. The exhaust produced by the gas, propane or diesel fuel powered machines emits, into the air, carbon monoxide (CO), nitrogen dioxide (NO2) and particulates. Ammonia (NH3) is commonly used in the ice chiller mechanical room ...

  • PureAire Universal Gas Monitor Receives UL Listing

    PureAire is pleased to announce that its PureAire Universal Gas Monitor received the UL/CUL listing for models 99030 and 99031. PureAire’s Universalmonitors comply with national and international safety standards, including UL 61010-1, CSA C22.2 NO. 61010-1-12-CAN/CSA, and IEC/EN 31010-1.  Designed to protect against toxic gases including ammonia, bromine, chlorine, hydrogen ...

  • Wastewater Treatment Plant Monitors Greenhouse Gas Emissions

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

  • Ammonia leaks in the news - how to keep your employees safe

    Ammonia (NH3) has been hitting the news for all the wrong reasons, after several gas leaks have been reported at workplaces. ...


    By Analox Sensor Technology

  • A preliminary review of gas-to-particle conversion monitoring and modelling efforts in the USA

    Ammonia and inorganic acid gases emitted from livestock and poultry operations, manure treatment, handling and application can affect air quality by the formation of secondary fine particles. The process of gas-to-particle conversion (GTPC) of relatively short-lived gaseous ammonia to more persistent fine particles can affect local and regional air quality far away from the agricultural sources. ...


    By Inderscience Publishers

  • N-Tox® prevents activated sludge failure and monitors greenhouse gas emissions

    A new technique for evaluating nitrification efficiency in industrial and municipal activated sludge systems is described that uses direct measurement of dinitrogen oxide, an important greenhouse gas, as an indicator of nitrification failure. Developed at Water Innovate, N-Tox® helps control ammonia levels in treated effluent by providing an early warning of wastewater treatment failure. The ...


    By Clarity Authoring

  • TDLAS Gas Detection Instrumentation

    PKL Technologies Inc. manufactures tunable diode laser (TDLAS) based gas detectors and monitors. Spectra-1 open path gas sensors are used in a variety of environmental and safety remote sensing applications. Spectra-1 gas sensors have been designed in a compact, easy to use, robust and portable format. Spectra-1 has been developed using proprietary hardware and software, to produce a low cost ...


    By PKL Technologies Inc.

  • Insitu analysis of ammonia slip and water vapor using a tunable diode laser for SCR/SNCR optimization and boiler tube surveillance in power plants

    ABSTRACT Environmental Regulations driven by the 1990 Clean Air Act require Power Plants to reduce NOx emissions. SCR's and SNCR's reduce NOx emission by injecting ammonia into the combustion flue gas. which ideally reacts with the NOx to form H?0 and Nj. The efficiency of the SCR SNCR is determined by monitoring the outlet for excess NH3. referred to as NH3 slip. The flue gas sample ...

  • NH3 Slip Monitoring in Fluidized-bed Catalytic Cracking Using the LDS 6 Gas Analyzer – Case Study

    Fluidized catalytic cracking (FCC) units are used in refineries to convert low value heavy oils into more valuable lighter compounds. Cracking units are sources of emissions of pollutants (e.g. NOx) and must comply with concentration permits set by local or federal authorithies. Modern technologies are applied to reduce the content of pollutants and to monitor certain gas compounds (here: NH3) in ...

  • NEO Monitors conquers the Quasi-impossible

    China is a world factory powered by its abundant coal resource. China is facing a huge environmental challenge brought together with the fossil-fired power plants. China has therefore been conducting technical retrofit to the engines of its economy, by introducing emission control facilities. Selective Catalytic Reduction (SCR) technology is one of the most widely applied emission control ...


    By NEO Monitors AS

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...

  • Advanced gas analysis - on the go

    The field of ambient air analysis - monitoring industrial and other environments for harmful concentrations of gases - has traditionally faced a technology limitations: Would you prefer a complete and reliable tool, which will be bulky, complicated and inconvenient? Or would you like a nice portable one that's simple and lightweight, but unreliable and limited in its capability? Truly complete ...


    By HHCS Handheld USA Inc.

  • Monitor Volatile Organic Compounds (VOC’s) with PPM Technology’s IAQ Monitor

    Volatile organic compounds (VOC’s) are emitted as gases from certain solids or liquids. VOCs include a variety of chemicals, some of which may have short- and long-term adverse health effects. Concentrations of many VOCs are consistently higher indoors (up to ten times higher) than outdoors. VOC’s is one of numerous sensor options that can be incorporated into PPM Technology’s ...


    By PPM Technology

  • Laser Gas Detector LGD F200

    Laser gas detection with innovative, easy-to-integrate OEM modules Diode Laser based gas detection gains increased interest in the industry as it offers significant benefits in terms of selectivity, stability and low maintenance. Axetris provides innovative gas detector modules as basis for extractive process control systems and for continuous emission monitoring systems (CEMS). The ...


    By Axetris Ag

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you