ammonia probe Articles

  • On-Line Nitrate/Nitrite Probes for BNR Process Control

    ABSTRACTReal time nitrogen monitoring plays an increasingly important role for the successful biological nutrient removal at wastewater treatment plants. Though traditionally dissolved oxygen has been the main process control parameter a greater understanding of the biological mechanisms and process conditions like nitrite/nitrate concentrations to achieve lower effluent values becomes necessary, ...

  • Major waste management company and cleveland biotech combine resources to resolve a breach of ammonia consent in a large wastewater treatment plant case study

    The WWTP itself is located in the East Midlands, and treats dairy waste from a large processing plant, treating c1,500m3 of effluent per day. On 30th July the ammonia (NH3) levels in the permeate from the MBR at the plant began to increase. The effluent plant discharges to a river and as such, the consent limit is stipulated by the Environment Agency at 4mg/l. Within three days, the ammonia ...


    By Cleveland Biotech Ltd.

  • Major waste management company and cbio combine resources, to resolve a breach of ammonia consent, in a large wastewater treatment plant case study

    The WWTP itself is located in the East Midlands, and treats dairy waste from a large processing plant, treating c1,500m3 of effluent per day. On 30th July the ammonia (NH3) levels in the permeate from the MBR at the plant began to increase. The effluent plant discharges to a river and as such, the consent limit is stipulated by the Environment Agency at 4mg/l. Within three days, the ammonia ...


    By Cleveland Biotech Ltd.

  • Monitoring pH and ORP in a SHARON reactor

    This paper analyses the valuable information provided by the on-line measurements of pH and oxidation reduction potential (ORP) in a continuous single high ammonia removal over nitrite (SHARON) reactor. A laboratory-scale SHARON reactor equipped with pH, ORP, electric conductivity and dissolved oxygen (DO) probes has been operated for more than one year. Nitrogen removal over nitrite has been ...


    By IWA Publishing

  • Optimizing Metals Removal

    Optimizing Wastewater Metals Removal Making Wastewater Metals Insoluble for Easy Removal To remove metals from wastewater, the metals need to be insoluble (not in solution). Many facilities, such as in the ...


    By Integrated Engineers Inc.

  • Enhancing Biological Nutrient Reduction in Advanced Individual Onsite Wastewater Treatment Systems

    ABSTRACTAdvanced onsite systems need to continue to improve wastewater treatment through nutrient reduction. Some advanced onsite systems have been shown to reduce nutrients significantly. However, with modifications, these systems can reduce total inorganic nitrogen (TIN) to an even greater degree, and nitrate to levels below federal drinkingwater standards. INTRODUCTIONNitrogen compounds in ...

  • Success of Onlin Leads to Closing for Wastewater 2 Process Control of Consent Order Treatment Plant

    In 2003, Plant City, a small Florida city of 30,000 residents, faced a very big problem. The Florida Department of Environmental Protection (FDF.P) determined that the city's wastewater treatment plant was not consistently operating within its permit limits, and placed it under a consent order. Plant City is a highly industrialized area. "Our industrial loading is very diverse and includes metal ...

  • DESWAT project in Romania

    Background Romania has a wide-area stream network which is of great importance for the drinking water supply of the population. In order to enable timely precautions for the protection of the drinking water supply and the ecosystem in case of limit values being exeeded, an early warning system is projected. In the past few years, Romania had to cope with massive flooding. Therefore the ...

  • Wastewater Treatment Plant Optimisation PLANT A - Case Study

    Site Details: PLANT A, Co. Cavan, Ireland. Operator details: Undisclosed Description of Wastewater Treatment Facility: PLANT A is an activated sludge Municipal Wastewater Treatment Facility which has inlet works followed by an oxidation ditch, secondary clarifier and a tertiary clarifier. Difficulties encountered on the WWTP ...


  • Reliable silica monitoring supports power station efficiency

    West Burton B CCGT is a Combined Cycle Gas Turbine power station near Nottingham in the UK. It has three open-cycle gas turbines capable of generating enough electricity for approximately 1.5 million UK homes. In common with all combustion based power stations, the CCGT has a requirement to monitor silica levels in the Plant’s water and steam processes. Sean Todd, the Plant’s Control ...

  • Dairy Crest – Dairy Effluent Treatment Case Study and Partech Water Instruments

    In order to comply with environmental regulations, the food and beverage industry relies heavily on constant monitoring and control of wastewater and effluent, before discharge from the plant. Additionally, if process plants fail to be vigilant when it comes to monitoring all areas of waste treatment, the results can be unsuccessful. Partech’s water instruments are ...


    By Partech (Electronics) Ltd.

  • Efficient Waste Water Treatment

    Clean drinking water is an essential need of mankind. Often surface water like rivers or lakes is used as drinking water source. To prevent these resources from pollution the effective treatment of waste water is a must. For example in China 75% of discharged waste water is coming from pulp and paper, textile and dyeing industries. To run a waste water treatment plant in the most efficient way ...


    By J.V. Niebergall CDH

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Discrete or Continuous Flow Analysis – which is better?

    A wide variety of factors affect the choice of analytical instrument. These include target workload (samples/hour), variety of chemistries, methods required, bench space, staff availability etc. In the following article Lalicia Potter, Technical Sales & Support Director at SEAL Analytical, examines one of the common decisions facing laboratory managers. As the manufacturer of an ...

  • Case study - DO control maximizes oxidation ditch treatment efficiency

    Process control is key to maximizing wastewater treatment efficiency while minimizing operating costs. Implementing the right process control system in conjunction with the right equipment can save money on electrical costs and equipment maintenance. The wastewater plant for the city of Dawson, MN, uses a  ...

  • Case study - Oxidation ditch expansion comes with host of benefits

    This wastewater treatment plant located in Texas was originally designed in 2000 but within several years, the city needed to double the treatment capacities of the facility. The wastewater treatment plant was designed with a plant capacity of 1.5 MGD utilizing a single ditch with the extended aeration activated sludge process for secondary treatment to facilitate removal of ...

  • Boiler Dissolved Oxygen Control

    DISSOLVED OXYGEN CHEMISTRY Dissolved Oxygen (DO) is a measure of the amount of oxygen, usually thought of as a gas, that is dissolved in a liquid such as water. Oxygen is essential to life and is also the most common element found taking part in corrosion reactions. DO can be thought of as the fuel needed for the corrosion process to proceed. It is the corrosion reactions that necessitate ...


    By IC Controls Ltd.

  • Profile of Ozone/Bromine Sanitation Systems for City of Tucson Municipal Pools

    Due to the inherent risks associated with the use of chlorine gas as a sanitizer for the City of Tucson’s twenty-six municipal swimming pool sites, I found myself in search of an alternative water sanitation method. The challenge was clear; find a system that would be safer to manage than gas chlorine, yet yield the same favorable sanitation and water quality results. Since all the sites ...

  • Fast, simultaneous and continuous monitoring of NOx and NH3 in DeNOx applications

    In DeNOx systems using urea injection with ammonia (NH3) as a reducing agent, the flow rate and control of NH3 must be continuously adjusted and controlled to prevent excess NH3 emissions (slip), to reduce environmental impact and cost of reagents. To optimize this process, it is essential to use an emissions analysis system for simultaneous and continuous monitoring of NOx and NH3. For preparing ...


    By Environnement S.A

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you