anemometer system Articles

  • Flow measurement technology comparison: GA5000 Vs Hot Wire Anemometer

    A typical landfill or contaminated land site under investigation will comprise of a suitable number of gas monitoring wells, with a planned series of monitoring visits.  The monitoring will include gas flow measurements, which together with methane and carbon dioxide concentrations will be used to calculate gas screening values (GSV) and hence allow the determination of whether any gas ...


    By Geotech

  • Verification of wind energy related measurements with a SODAR system

    Abstract Complex terrain and growing wind energy converters (WEC) in wind parks generate increasing interest in determining wind profiles and turbulence besides the general forecast of annual energy production. Increasing hub heights and growing rotor diameters of advanced WEC make SODAR systems a valuable alternative to meteorological towers. SODAR systems provide wind profiles as well as ...

  • Case study - Weather data for nautical information system

    In Lemwerder, Germany at the Weser River, wind direction and speed are measured and transferred in 60 second intervals via the OTT netDL 1000.  The data is transmitted, wireless, over a distance of 600 meters to the radar tower in Ritzenbuettel, where it is integrated into the ship traffic network - the Authority for Water and Navigation (WSA), Bremen. The WSA is also responsible for ...


    By The OTT Hydromet Group

  • PV Monitoring System Offers Solution for Plant’s Solar Array

    dataTaker DT85 Monitors Electrical and Environmental Parameters as a PV Monitoring System A customer inquired with CAS DataLoggers about a plant monitoring systems for a photovoltaic (PV) system. Their request was not only for a device to measure the current and voltage output of the solar array, but also ...


    By CAS DataLoggers

  • Port of London Authority Tidal Monitoring System - POLATIDE 5: Detailed - Case Study

    Introduction: Valeport and OceanWise have designed and delivered a complete tidal monitoring system, including tide gauges, telemetry equipment, servers, databases, system control, data management and display software, to the Port of London Authority. The system was installed in October 2013 and rigorous testing completed in February 2014.  Background: ...


    By Valeport Ltd

  • Validation of computational non-Newtonian fluid model for membrane bioreactor

    Membrane bioreactor (MBR) systems are often considered as the wastewater treatment method of the future due to their high effluent quality. One of the main problems with such systems is a relative large energy consumption, compared to conventional activated sludge (CAS) systems, which has led to further research in this specific area. A powerful tool for optimizing MBR-systems is computational ...


    By IWA Publishing

  • What are the advantages of ultrasonic wind sensors?

    Whether mechanical, ultrasonic or laser wind measurements: All measuring methods have technical limits. While for mechanical wind sensors the measuring element – cups and vanes – itself predominantly produces a disturbance in the flow field, for ultrasonic anemometers a disturbance can be caused by the sensor holder or housing construction. Only optical methods, e.g. LDA (Laser ...

  • Do you need to measure air flow?

    Look no further. This hot wire thermo-anemometer is ideal for low air velocity, volume, and temperature measurement. If your desired application involves ventilation surveying, the maintenance of air conditioning systems, or environmental monitoring, this product will meet your requirements and more. Record your measurements on a slim plug-in telescopic probe and download the data ...


    By ATP Instrumentation Ltd

  • Intrinsically safe ultrasonic wind sensor

    The Gill Instruments Intrinsically Safe WindObserver™ is an ultrasonic wind sensor, developed specifically for use in hazardous areas and in particular for offshore applications. The sensor has no moving parts, utilising Gill Instruments’ advanced ultrasonic measurement technology to accurately monitor wind speed and direction. Approved to EEx ia IIC T5, this ultrasonic wind sensor is a ...


    By Gill Instruments Limited

  • The evolution of thermal mass flow meters

    Who were some of the pioneers in thermal mass flow technology? A. Thermo-Systems, Inc. (TSI) began in its founder’s basement in 1959, with a cooled-film anemometer designed for transient measurements in high temperature fluid flows. This led to TSI’s hot-film and hot-wire anemometers, the first commercial products of this type. These immersion-type devices were used mainly as ...


    By Sierra Instruments, Inc.

  • Lufft WS200 wind sensors on a research station in the Antarctica - Case Study

    Base Orcadas is an Argentine scientific research station in the Antarctica. It is located on Laurie Island, one of the South Orkney Islands (Spanish: Islas Orcadas del Sur), at 4 meters (13.1 ft) above sea level and 170 meters (558 ft) from the coastline and is the oldest one there which is still in operation. The nearest port is the Argentine city of Ushuaia, which is 1,502 km (933 mi) away. ...

  • Case study - Barnsley Council

    As part of their commitment to improving the energy efficiency of all homes and buildings within their borough, Barnsley Council contacted Logic Energy to see if they could assist Dearne Carrfield Primary School in discovering their “green potential” before investing in a renewable energy system. With solar thermal systems, wind, solar PV and biomass systems all an option, the school ...


    By Logic Energy Ltd.

  • Gill MetPak II weather station used to protect maltese prehistoric temples case study

    Weather data provided by the Gill MetPak II Weather Station increases understanding of the affects of weather and climate on stone structures. The Gill MetPak II Weather Station is being used as part of a comprehensive air monitoring system at a prehistoric temple site for the Maltese Department of ...


    By Gill Instruments Limited

  • How a Lufft sensor helps to improve a solar car

    After a successful collaboration between Lufft and the Punch Powertrain Solar Team in the Bridgestone World Solar Challenge of 2013 and 2017 (6th and 3rd place), both parties decided to extend the partnership. The World Solar Challenge is a race of 3020km straight through the ...

  • Lufft sensors now officially approved for airports in Ukraine

    Background info There are 16 international civil airports in Ukraine. At the moment only 10 of them are in operation. A major modernization and restoration program for airports is currently underway in the country. This includes the construction of new runways and the reorganization of aviation weather services. In this context, all existing AWOS (Automated Airport Weather ...

  • Weather Data for Noise Monitoring

    “Weather conditions are the single largest variable factor in how sound travels over large distances,” says Steve Bilawchuk principal partner and engineer at ACI Acoustical Consultants Inc. “Wind speed and wind direction are of crucial importance.” ACI is an acoustical engineering consulting company based in Alberta, Canada, which uses ...

  • ´More Stations. More Data. Better Forecasts.´ – the NYS Mesonet

    “More Stations. More Data. Better Forecasts.” – that’s the slogan of New York State Mesonet. The weather observation network consists of a total of 125 weather stations all over the state of New York and Lufft was selected as one of the vendors to support them in capturing the data. All 125 of the weathers stations have the standard instrumentation suite. Of those 125, 17 ...

  • Advances in Thermal Dispersion Mass Flow Meters - Part 1 Principle of Operation

    Abstract This paper describes an advanced microprocessor-based thermal dispersion mass flow meter that uses four temperature sensing elements in its flow sensor instead of the traditional two elements and has a dry velocity sensor that uses no potting materials instead of the traditional potted velocity sensor. This unique new mass flow meter automatically manages changes in gas selection, ...


    By Sierra Instruments, Inc.

  • Future inside – smart environmental sensing technology

    SHM30 snow depth sensor in Antarctica (photo: Alfred-Wegener-Institut, Helmholtz-Zentrum Bremerhaven) A lot of sensing technologies have changed recently: Ultrasonic wind measurement replaces cups and vane systems, closed anemometer designs offer better protection from ...

  • How to Keep Your SymphoniePRO Data Secure

    Data matters. The accuracy, consistency, and yes, safety of measurement data keep many wind developers and analysts up at night. Customers often ask about the digital and physical security of RNRG instruments, so I sat down with Michael Fisher, product manager for our wind resource assessment (WRA) line, to get answers to the most common questions. Q: Why is data security important? ...


    By NRG Systems

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you