atex certification Articles

  • Safety implications In the Waste industry following implementations of Atex directives

    Summary: Introduction of ATEX Directives 95 and 137 in July 2003 increased pressure on all industries dealing with potentially explosive atmospheres, including the waste industry. Both the equipment and the operating procedures had to be reviewed in order to comply with the directives. ATEX is the acronym of French words ATmosphere Explosives. In the UK, although the Dangerous Substances and ...


    By Biogas Technology Limited

  • For its anniversary, MEDOR® certified ATEX for zone 1 & 2

    CSA type approval certification also in progress   Since 2009, Chromatotec® proposes a version of its MEDOR® analyzer in Exp cabinet for hazardous areas. This solution dedicated for monitoring and online analysis of odorous compounds in natural gas today received the ATEX certification for zone 1. MEDOR® was already certified for ...


    By Chromatotec Group

  • Koppers - Case Study

    Client: Koppers Europe Ltd, Scunthorpe, Lincolnshire Application: Naphthalene fume scrubbing from naphthalene and oil blend storage tank vents System description: The fume scrubbing system treats the air which is naturally vented from bulk storage tanks and road-tanker filling stations and removes the odorous naphthalene vapour from it. The V-texTM ...

  • The SafeTap in action a tank cleaner’s perspective case study

    The SafeTap tool from Oreco ensures quick, easy, and safe tapping of holes in oil tanks, allowing for speedy insertion of cleaning nozzles. Here, experienced tank cleaning professionals share their thoughts on the SafeTap and its main points: ATEX certification for Zone 0, easy and safe operation, rapid preparation, and more. STS Tank Cleaning: Extensive experience STS Tank ...


  • HawkEye CSO Discharge Alarm System

    Hawkeye is a two-channel GSM telemetry recorder and a joint venture between Hydro-Logic and IETG of Leeds. Hydro-Logic provide the key electronic and firmware technology basing it on our successful Hawk range of outstations. It was the first fully integrated measurement and telemetry system specifically designed to monitor the performance of Combined Sewer Overflows (CSO). All electronics ...

  • Case study - China Resources Gas Group Ltd

    Anaerobic fermentation project with waste water in Qidong Jiangsu Province, China.  The purification project was set up in order to connect the biogas to the city’s gas pipeline. The customer’s challenge Biogas upgrading: the Group aims to make use of what would ordinarily be a by-product – waste water.  Gas is extracted from a water treatment process, ...


    By Geotech

  • Case study - Biogas monitoring for upgraded biomethane

    By working with a range of partners worldwide, Geotech is involved in a range of projects at the cutting edge of biogas production and processing.  The recent landmark deal agreed between Marks & Spencer (M&S) and Future Biogas, a major biogas plant operator, is for the purchase of biomethane certificates. The deal sees M&S purchase 35,000 Mega-Watt hours (Mwh) of certificates, ...


    By Geotech

  • Going further with food: The rise of channelling food waste for biogas production

    Almost 50% of the total amount of food thrown away in the UK comes from our homes, representing over seven million tonnes of food and drink wasted from British households annually. Wasting this food costs the average household £470 a year.  In fact, if we all stop wasting food that could have been eaten, the benefit to the planet would be the equivalent of taking 1 in 4 cars off the ...


    By Geotech

  • Case study - Going further with food: The rise of channelling food waste for biogas production

    Almost 50% of the total amount of food thrown away in the UK comes from our homes, representing over seven million tonnes of food and drink wasted from British households annually. Wasting this food costs the average household £470 a year.  In fact, if we all stop wasting food that could have been eaten, the benefit to the planet would be the equivalent of taking 1 in 4 cars off the ...


    By Geotech

  • Going Further with Food: The Rise of Channelling Food Waste for Biogas Production

    Almost 50% of the total amount of food thrown away in the UK comes from our homes, representing over seven million tonnes of food and drink wasted from British households annually. Wasting this food costs the average household £470 a year. In fact, if we all stop wasting food that could have been eaten, the benefit to the planet would be the equivalent of taking 1 in 4 cars off the road ...


    By Geotech

  • Optimus and doseBadge Adapt to New Challenge - Case Study

    Established in 1934, Lindapter International is the world’s innovator of steelwork clamping systems, eliminating the requirement to drill or weld steel.  The company designs and manufactures specialist products for connecting structural steel sections together and  has more than 85 years’ experience in its field. The company’s success is the result of its dedication ...


    By Cirrus Research plc

  • Tank terminal demonstrates the electrically operated solution for ESD Valves - case study

    Overview Since the disastrous fire at the Buncefield fuel depot in 2005, much has been done to ensure that such a catastrophic accident should not happen again. Led by COMAH (Competent Authority/Industry Standards Task Group), safeguards have been put in place by the petroleum industry to provide additional safety and environmental protection to tank storage installations. Endorsing the ...


    By Rotork

  • Understanding the potential class II – Division I Safety Hazards present when operating Vertical Cuttings Dryers

    For decades, the industry standard for waste management dryers (a.k.a. vertical cuttings dryers) has relied on belt-driven sheaves. Though belt-driven systems are cost effective and relatively easy to implement, at a minimum they have represented a maintenance nuisance, at worst they represent a serious safety concern when ...


    By Elgin Separation Solutions

  • Upgrading from Pellistor Gas Sensors to Infrared Technology

    In this article Andy Avenell, Crowcon’s Fixed Systems Product Manager, considers the shift towards infrared (IR) gas sensor technology in the oil and gas industry. Abstract Flammable gases and vapours can present considerable dangers in many industrial applications, none more so than the processes involved in extracting, transporting and processing oil and gas. Fast and reliable ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you