ATEX zone 1 Articles

  • For its anniversary, MEDOR® certified ATEX for zone 1 & 2

    CSA type approval certification also in progress   Since 2009, Chromatotec® proposes a version of its MEDOR® analyzer in Exp cabinet for hazardous areas. This solution dedicated for monitoring and online analysis of odorous compounds in natural gas today received the ATEX certification for zone 1. MEDOR® was already certified for ...


    By Chromatotec Group

  • Safety implications In the Waste industry following implementations of Atex directives

    Summary: Introduction of ATEX Directives 95 and 137 in July 2003 increased pressure on all industries dealing with potentially explosive atmospheres, including the waste industry. Both the equipment and the operating procedures had to be reviewed in order to comply with the directives. ATEX is the acronym of French words ATmosphere Explosives. In the UK, although the Dangerous Substances and ...


    By Biogas Technology Limited

  • Monitoring the oxygen content in bio-methane-to-grid supply

    Orbital utilise the EC91 ATEX oxygen analyser from Systech Illinois to accurately monitor the oxygen content in the purified bio-methane gas prior to it being injected into the national grid gas network In September 2010, Orbital installed the gas monitoring and treatment plant on the UK’s very first large-scale bio-methane-to-grid production facility. This site was designed specifically to ...


    By Systech Instruments Ltd

  • Monitoring the oxygen content in bio-methane-to-grid supply - Case Study

    Since 1984, Orbital has provided advanced technology solutions for the natural gas industry. Orbital’s customers, including the National Grid and the UK's gas distribution networks, rely on its crucial engineering support and specialised knowledge. Its value-added services and innovative products reduce the time it takes to identify, design and begin cost-effective delivery of new ...


    By Systech Instruments Ltd

  • Case study - N°NG1 – Natural gas monitoring – Medor Exp

    Context & Challenges Natural gas used for household consumption typically contains odorant sulfur components for safety reasons. As natural gas is normally odorless, the sulfur components are artificially added. When natural gas is transported between various companies, regions or countries, gas companies have to verify that the sulfur species are present as specified. ...


    By Chromatotec Group

  • Centralised treatment of oil sludge and other industrial waste - case study

    Centralised treatment of various sources of industrial waste has been established in many European countries over the last decade. Many facilities are still equipped with non state of the art technology and therefore cannot fulfil the broad field of applications with regard to industrial waste remediation, econ's international client decided to be one step ahead and erected a new econ industries ...

  • Particulate removal - Case Study

    Application QAFCO (the Qatar Fertiliser Company) operates the world's largest ammonia and urea production site at Mesaieed City, Qatar. The QAFCO 5 expansion project is a $3.2 billion investment to expand capacity to help meet the increased demand from agriculture. It is scheduled to come on stream in 2011. Each of the QAFCO plants uses highly explosive high-pressure natural gas from ...

  • Pharmaceutical Gas Scrubbing - Case Study

    Application Novartis Ringaskiddy Limited needed to scrub a variety of aggressive acid and volatile organic compounds from the vents of pharmaceutical batch reactors. These make up part of the manufacturing process of a range of pharmaceutical ingredients. The compounds included HCl and methyl bromide fumes within air or nitrogen streams. System description ...

  • Advantages of Corrosion Resistant Lighting in Offshore Helidecks

    Advantages of Corrosion Resistant Lighting in Offshore Helidecks Corrosion resistant lighting must be installed in offshore helidecks due to the extreme nature of the hazardous location. The use of such luminaries can extend the lifespan of the location’s lighting system and provide safety for aircraft pilots and workers on the site. ...


    By Larson Electronics LLC

  • Breathe easy: The importance of emission reduction and energy efficiency

    Breathe easy Blue oil mist is an unwelcome by-product of industrial work in the energy sector. contec specialises in high-powered, energy efficient and environmentally friendly oil mist filtration systems that reduce health risks and are an inexpensive alternative to traditional exhaust piping. The high concentrations of blue oil mist produced by industrial ...

  • BRANS Measuring & Controlling Technology Co. Ltd

     BRANS Measuring & Controlling Technology Co. Ltd is a Chinese Manufacturer of different types of load cells, torque sensors, pressure sensors, multi-axis sensors and related instruments and software.Brans Located in the Electronic City-Hefei, Anhui Province. BRANS built a reputation as a quality provider of test and measurement tools around the world. As the Sensor Solution Source, ...

  • Degassing Refrigerators - Drill-head and Piercing-plier

    1. For what purpose do we have to degas a refrigerator? A refrigerator has to be disposed as hazardous waste. The refrigerants inside a hazardous refrigerator are harmful for the environment (ozone depleting and greenhouse effect). Most common refrigerants are; R12, R134a and R600a. The uncommon is the removal of NH3. Refrigerants are developed to dissolve very easily into ...


    By ATN Engineering B.V.

  • Measuring methane at the UK`s first viable compact anaerobic digester plant

    At the UK's first viable compact anaerobic digester (AD) plant aimed at local food waste treatment, a Geotech GA3000 fixed biogas analyser monitors methane (CH4), carbon dioxide (CO2), oxygen (O2) and hydrogen sulphide (H2S). The plant, a modular scalable AD system, unveiled by React Environmental in July 2012 at Llangadog, Carmarthenshire, can handle some 1,000 ...

  • Cerex introduces the new AirSentry FTIR Open Path Analyzer

    Cerex Monitoring Solutions is pleased to announce the release of the third generation model AirSentry FTIR multi-gas open path FTIR analyzer. The decision was made to fully redesign the analyzer to take full advantage of advances in hardware and software technology. The third generation design represents a full reconfiguration of the instrument. Goals were to reduce initial and operating costs ...

  • What is The Difference Between Submersible and Immersible Pumps?

    These terms can often be confused though the distinction is fairly obvious. Submersible pumps are complete units, including the motor, and the whole can be totally submerged whereas immersible pumps are mounted in vertical position with the motor above the liquid and the pump end extended below the liquid level. ...


    By Crest Pumps Ltd.

  • Standardised UV disinfection skid packages for offshore potable water treatment - Case Study

    The process of disinfecting water with UV light is a proven technology, and has been widely used throughout the offshore petrochemical sector for crew drinking water supplies for over 30 years.  In the UK, new guidelines introduced by the Drinking Water Inspectorate (DWI) in February 2010 now require all UV systems used for the disinfection of potable drinking water to be independently 3rd ...


    By atg UV Technology

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you