atomic absorption spectrometer Articles

  • What is a Spectrometer?

    The characteristics of a white LED light differs greatly, when compared to a yellow CFL. Without any special tools, one can see that the LED emits a clear white color, while the CFL generates yellow light. Going one step further, using a spectrometer, one will be able to “dissect” the light sources and see that they are composed of other colors in the visible light spectrum, such as ...


    By Larson Electronics LLC

  • How Does a Gas Analyser Work?

    Whatever you want to detect, you need to identify a property of the object that is easy-enough to measure. When it comes to monitoring and analysis of gaseous species (atoms or more commonly molecules), it turns out that it often is possible to utilize the optical properties of the gas. You need a light source, a light detector, and a characteristic behaviour of the gaseous species in question ...


    By Opsis AB

  • Analysis of low levels of metals in drinking water with a scanning array ICP emission spectrometer and ultrasonic nebulization

    Drinking water is an important factor in exposure to environmental contaminants and is used in preparing foods and beverages for human consumption. Therefore, great care is used to verify that it is free of or contains acceptable limits of toxic substances. With respect to heavy metals and other toxicologically relevant elements, atomic spectrometric techniques are frequently used to determine ...


    By PerkinElmer, Inc.

  • Elemental composition of ambient aerosols measured with high temporal resolution using an online XRF spectrometer

    Markus Furger1,*, María Cruz Minguillón2, Varun Yadav3, Jay G. Slowik1, Christoph Hüglin4, Roman Fröhlich1, Krag Petterson3, Urs Baltensperger1, André S. H. Prévôt1 1Laboratory of Atmospheric Chemistry, Paul Scherrer Institute, 5232 Villigen 5 PSI, Switzerland 2Institute of Environmental Assessment and Water Research (IDAEA), Consejo Superior de ...

  • The determination of major and minor elements in air filters and urine for hazard assessment, using a new CCD DUAL-VIEWED ICP optical emission spectrometer

    This article describes the application of a new type of CCD-based, dualviewed ICP optical emission spectrometer for the analyses of industrial hygiene types of samples. Several trace elements in air filter media are determined by ICP-OES. Urinary electrolytes and trace elements are determined in a single dilution automatically in both the axial and radial plasma viewing orientations. Results of ...


    By PerkinElmer, Inc.

  • The application of Flow Injection Technology to automating cold vapor MERCURY analyses

    This document describes the application of flow injection technology to cold vapor mercury analyses. It can be obtained from PerkinElmer by requesting method number ENVA-100. Appendices 1 and 2 show letters from the US EPA indicating acceptability through the Alternate Test Program for both drinking water and wastewater sample analysis. 1.0 Scope and Application 1.1 This ...


    By PerkinElmer, Inc.

  • Determination of toxic heavy metals in sea water by FAAS after preconcentration with a novel chelating resin

    A solid phase extraction procedure was developed for preconcentration of toxic heavy metals such as cadmium, cobalt, copper, manganese, lead and zinc in sea water samples. A microcolumn packed with 6-[(4-hydroxyphenyl)diazenyl]naphthalene-2,3-diol-formaldehyde (HPDN-F) resin acts as a sorbent to retain the analyte ions by forming metal chelates. The retained trace level metal was subsequently ...


    By IWA Publishing

  • FTIR Spectroscopy

    Fourier Transform Infrared (FTIR) Spectroscopy bases its functionality on the principle that almost all molecules absorb infrared light. Only the monatomic (He, Ne, Ar, etc) and homopolar diatomic (H2, N2, O2, etc) molecules do not absorb infrared light. Molecules only absorb infrared light at those frequencies where the infrared light affects the dipolar moment of the molecule. In a molecule, ...


    By CIC Photonics, Inc.

  • Removal of hexavalent chromium by chemical modification of 4,4′-((1Z,11Z)-2,5,8,11-tetraazadodeca-1,8-diene-1,11-diyl)diphenol: kinetic and equilibrium modeling

    This study aimed to synthesize a new resin through immobilization of the 4,4′-((1Z,11Z)-2,5,8,11-tetraazadodeca-1,8-diene-1,11-diyl)diphenol (TRA) onto silica gel modified (Si-CPTS) with 3-chloropropyltrimethoxy silane (CPTS) and its application for the removal of chromium(VI) ions from aqueous solution as well as from industrial wastewater. The same applications were also made for industrial ...


    By IWA Publishing

  • Simultaneous Determination of Pb, Cd, Cr, Ni, and Cu in plants using microwave digestion and graphite furnace AAS

    The determination of lead, cadmium, chromium, nickel, and copper in plants is part of several biological monitoring programs. Monitoring these elements is important in order to observe and document the damage on plants caused by environmental pollution. The samples consist of leaves and needles collected from different types of trees. These trees are selected species monitored over a long period ...


    By PerkinElmer, Inc.

  • Life Among The Heavy Metals

    Authors in scientific and applied works interpret the meaning of the concept "heavy metals" in different ways. Today, they include more than 40 chemical elements with an atomic mass of more than 50 atomic units. An important role in the determination of heavy metals is played by the following conditions: their high toxicity in relatively low concentrations, and the ability to bioaccumulation. ...


    By Lumex Instruments Group

  • Assessment of Lead Exposure in Thohoyandou, South Africa

    Lead levels in different environmental media (soil, grass leaves, water, ceramics, pencil, paint, crayons and cosmetics) were determined to assess the major sources of lead exposure in Thohoyandou, South Africa. Soil and plant leaves were used as indicators of Pb pollution from vehicle exhaust emissions. After digestion with concentrated acids (HNO3, HCl and HClO4) Pb concentrations were ...


    By Springer

  • How Not to Lose Cadmium While Measuring?

    Today cadmium finds a better usage than a hundred years ago. For example, metal cadmium plating is used for anticorrosion coatings that are more stable than zinc, nickel and tin-plated. Cadmium plating of steel parts gives greater resistance to corrosion, especially in sea water. About 20% of cadmium goes to the manufacture of cadmium electrodes used in ...


    By Lumex Instruments Group

  • A quick guide to oil analysis for engine test applications

    Reliability testing is a very important component of new engine development. Engineers need to fully understand and chart the engine lifetime performance under a variety of conditions before mass production may be considered. Many important performance data parameters are collected in real time through the many different types of sensors that are connected to the engine in the test cell and oil ...


    By Spectro Scientific

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you