automatic cartridge filter Articles

  • Removing Solids with Automatic Self-Cleaning Filters

    Introduction The “art” of filtration utilizes many methods for separating solid particles from fluids. There is often no right or wrong method. Water quality and customer requirements usually determine the “best” method for each unique situation. Ridged screens, pleated cartridges, string wound cartridges, melt blown cartridges, woven fabrics, non woven fabrics, sintered metals, granular ...

  • PREFILTERS IN ULTRAFILTRATION PROCESSES

    AZUD HELIX AUTOMATIC filters are excellent protecting Ultrafiltration membranes. Their operation is based in the disc filtration technology, which supplies an in-depth filtration. The installation of AZUD HELIX AUTOMATIC filtration equipments as prefilters is one of its commonest applications. The installation of AZUD HELIX AUTOMATIC filtration equipment prior to the cartridge filters permits: ...


    By Sistema Azud, S.A.

  • A Membrane Pretreatment Technology

    Nearly all membrane systems, no matter what their raw water source, must utilize some form of pretreatment to remove unwanted organic and inorganic suspended solids. Bag and cartridge filters are efficient at removing suspended solids but must be replaced on a frequent and often costly basis. Some form of suspended solids removal system that cleans itself, maintains high flow rates and stays ...

  • Fundamentals and Advantages of Screen Filtration

    The “art” of filtration utilizes many methods for separating solid particles from fluids. There is often no right or wrong method. Water quality and customer requirements usually determine the “best” method for each unique situation. Ridged screens, pleated cartridges, string wound cartridges, melt blown cartridges, woven fabrics, non woven fabrics, sintered metals, granular media, frizzy balls ...

  • Self-Cleaning Pre-Filtration for RO Membrane Systems

    ABSTRACT A few years ago physical processes could only remove suspended solids from a water stream. Recent advances in technology now allow the removal of selected molecules and ions from a water stream by physical means using membranes. The membrane process has recently become very efficient and economically feasible for many industrial, commercial, municipal and even residential customers. ...

  • Efficient Removal of Organic and Inorganic Suspended Solids

    ABSTRACT The Romans used sand as a filter media to treat their drinking water 2000 years ago. Centuries ago water was poured through layers of cloth to remove visible impurities in drinking water with fabric bags and paper cartridges soon following. Darcy employed sand beds in Dijon, France over 200 years ago to conduct his experiments for developing his famous equation to describe fluid flow ...

  • Self-Cleaning Pre-Filtration for RO and Other Membrane Systems

    Abstract A few years ago physical processes could only remove suspended solids from a water stream. Recent advances in technology now allow the removal of selected molecules and ions from a water stream by physical means using membranes. The membrane process has recently become very efficient and economically feasible for many industrial, commercial, municipal and even residential customers. ...

  • Analysis of PCBs in emission samples: non ortho, mono-ortho and homolog totals by level of chlorination

    IntroductionPolychlorinated biphenyls (PCBs) are one of the most widespread persistent organic pollutants, identified in every component of the global ecosystem. A production of approximately 2 * 10 9 Kg technical PCB occurred form 1930 to the late 1970 1 and the total amount released into the environment is estimated in 370. 000 2 tonnes. Twelve of the possible 209 PCBs are non- and mono-ortho ...


    By Monitoring Systems GmbH

  • Methods of Purification

    Water Innovations Water Systems Carbon Filtration is used for several reasons. Its primary purpose is the reduction of chlorine to less than 0.1 ppm. Chorine can damage softener resins, reverse osmosis membranes, and mixed bed deionization resins. Activated carbon will also help control tastes and odors, provide organic and hazardous organic chemical ...


    By Water Innovations, Inc

  • Case study - Fiberglass polymer emissions: RTO control technology

    OVERVIEW A producer and supplier of corrosion resistant piping systems was looking to improve the reliability and lower operating expenses of an existing air pollution control system at their facility. During their manufacturing process, centrifugally cast mortar pipe systems are reinforced with a fiberglass polymer. This makes the pipe ideally suited for most corrosive piping ...

  • Case study - RTO: Efficient and reliable styrene control technology

    Problem A producer and supplier of corrosion resistant piping systems was looking to improve the reliability and lower operating expenses of an existing air pollution control system at their facility. During their manufacturing process, centrifugally cast mortar pipe systems are reinforced with a fiberglass polymer. This makes the pipe ideally suited for most corrosive piping applications ...

  • Crossflow Membrane Filtration High-Purity Water Systems

    INTRODUCTION As the electronics industry continues to provide us with such products as high resolution television, notebook size portable computers and cars with automatic navigation systems, it becomes necessary to produce semiconductors with finer device geometries to allow for efficient placement of more circuits per a given area. This requires increased control of a semiconductor's material ...

  • High frequency monitoring needed to protect UK rivers - Case Study

    The science behind nutrient pollution in rivers is still poorly understood despite the fact that nitrate and phosphate concentrations in the UK’s rivers are mostly unacceptable, although an element of uncertainty exists about what an acceptable level actually is. Key to improving our understanding of the sources and impacts of nutrient pollution is high-resolution monitoring across a broad ...


    By OTT HydroMet

  • The productive environmental laboratory: BSK Labs boosts efficiency with Metrohm IC

    BSK Labs runs a number of environmental laboratories and service centers along the west coast of the US. A total of 70 employees – including microbiologists, chemists, lab technicians, and support staff – make sure that the 200 to 350 samples that come in every week are analyzed. BSK Labs specializes in potable water chemistry, ground water monitoring, storm water runoff, solid waste ...


    By Metrohm AG

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you