automatic centrifuge Articles

  • Intensive-washer for surface washing of the granulates an films

    The Intensive Washer IW Series from Neue Herbold is a centrifugal downstream unit for intensive cleaning of hard plastic granulates and films flakes. The pre-washed material is intensively washed; while passing the machine, it is thrown against the screen by centrifugal forces. Various screens determine the cleaning efficiency. The rotor of the intensive cleaner may be equipped with ...

  • Pump with 900 foot head (that has hi-pressure, hi-flow, and hi-head pumping capacity)

    GRIFFIN 3 STAGE JET PUMPS These pumps are capable of delivering fl ow over 1,400 gallons per minute and head conditions up to 900 feet. They come equipped with hand-operated diaphragm primers as standard but can be equipped for automatic priming. Griffi n jet ...

  • Multiphase pumps for energy-efficient water and wastewater treatment

    Multiphase pumps are unique products with outstanding features compared to conventional centrifugal pumps. The approach consists of using the pumps not only for transport of liquids but also for partial gas supply and as dynamic mixer for gas enrichment. Therefore this novel pump conception barely has ...

  • Pumps for energy-efficient water and wastewater treatment

    Multiphase pumps are unique products with outstanding features compared to conventional centrifugal pumps. The approach consists of using the pumps not only for transport of liquids but also for partial gas supply and as dynamic mixer for gas enrichment. Therefore this novel pump conception barely has something in common with a standard pump. Even the mode of ...

  • EDUR Multiphase Pumps for energy-efficient water and wastewater treatment

    Multiphase pumps are unique products with outstanding features compared to conventional centrifugal pumps. The approach consists of using the pumps not only for transport of liquids but also for partial gas supply and as dynamic mixer for gas enrichment. Therefore this novel pump conception barely has something in common with a standard pump. Even the mode of ...

  • Case study - Nottinghamshire Recycling

    DUO Equipment delivered and installed a new full washing and water management plant for Nottinghamshire Recycling Ltd (NRL). Based in Worksop, Nottinghamshire, NRL is a sustainable waste solution provider processing C & D waste, green waste, wood and recycled aggregates. The new washing and water management plant (which includes a Gennaretti centrifuge system) will provide NRL with the ...


    By DUO (Europe) plc

  • Energy from waste: the recycling of limed fleshings

    Leather products have been around a long while - there are those who claim that it is the second oldest business in the world. Going back a few millennia, when our earliest ancestors decided that sitting on hard rock was not a soft option, they turned to other materials in order to create more comfortable seating, as well as warmer bedding and improved clothing. Animal skins became the fabric ...


    By Flottweg SE

  • Dewatered waste is disposed at lower cost

    By compacting and dewatering  reject, a paper recycling company avoid having to transport water for no useful purpose. SKJERN PAPIR A/S in Denmark produces 54,000 tons of liner and cardboard from recycled paper annually. In the initial sorting, the paper material is separated out from large, insoluble materials such as plastic, staples and other unwanted elements using a pulper. The ...


    By Runi A/S

  • Allweiler delivers its largest lube-oil module to Finnish power plant

    The Pump Skid business segment of Allweiler AG was chosen to deliver the entire lubrication-oil module for Finland’s Olkiluoto 3, the world’s largest power plant. Four Allweiler centrifugal pumps will handle pumping of lubrication oil. The lubrication oil tank holds 123 m3. It is the largest unit of this type that Allweiler has ever delivered. Planning for the system began in2004. The power plant ...


    By ALLWEILER GmbH

  • Case study - Olive mill waste water treatment

    The production of olive oil generates two kind of waste waters: RINSING WATERS: the quantity is subject to change. It can be re-circulated, after the settling to remove the solids, or discharged directly. SLUDGE: vegetation water with additional water, whose quantity is subject to change. In case of traditional oil mills, the hot additional water flows to the inlet of the centrifuge. Part ...


    By EVALED-Evaporator

  • AVA - the fast way of API drying - Case Study

    AVA dryers for pharmaceutical substances meet and exceed International standards GMP and FDA, also for HP APIs. AVA dryers are customized units, made of high-quality steel (e.g. hastelloy). They can be equipped with fully automatic containment solutions or manual glove boxes to ensure maximum of industrial safety measures. Clamped flange joints and CIP/WIP nozzles make AVA dryers extremely easy ...


    By AVA GmbH u. Co. KG

  • M-Coating – drain & sewer spraylining the economical solution to manhole shaft renovation

    M-Coating – Procedure for renovating a manhole shaft using ERGELIT Kombina KS M-Coating is a new, innovative renovation technique for both round and rectangular drainage shafts from 500mm to 1200mm. It is based on over 15 years of the Hermes company’s experience. Using this centrifuge spray technique, walls of shafts up to 10 metres deep can be coated to a realistic thickness. ...


    By HERMES Technologie Ltd.

  • Mixing and filling system for egg yolk powder

    Subject: To improve the handling and application characteristics of egg yolk powder. Filling of drums and big bags.   Client: Adriaan Goede (NL)   Process: After drying the egg yolk is homogenised in a centrifugal sifter. A special vacuum conveying system lifts the very poor flowing powder to a weigh hopper. Discharging with a RA bin discharger into a horizontal double shaft GMS ...


    By Gericke

  • Municipality of Barrows, Manitoba case study

    Situated some 500 km north of Winnipeg, the municipality of Barrows is home to about 300 inhabitants. Barrows has a school in the village with close to 100 students. The only available source of water supply for the municipality is an underground spring with a TDS (total dissolved solids) concentration exceeding 1900 mg/L making the water undrinkable (see Table I). At the request of John Brittain ...


    By H2O Innovation

  • Fluid mixing is ideal way of multi component production

    Liquids can be mixed manually and a mechanical way. Mixing is necessary at dissolution of hard substances in liquid, at liquid dissolution in liquid, when carrying out many works. The mixing method of liquids in a stream has a set of advantages under a method of periodic mixing, especially, if it passes just before a pouring stage. The combination of high-precision measuring devices, digital ...

  • Waste water treatment costs reduced by 50% with rotary vacuum precoat filter - Case Study

    Problem: The solids separation system at Lindc's waste water treatment facility had high operating, maintenance and sludge disposal costs. High operating costs were caused by the large pumps and special treatment chemical required to operate the filter, and frequent cleaning, repair and replacement of filter elements resulted in high maintenance costs. Union Carbide Corporation's Linde ...


    By Komline-Sanderson

  • Selecting a Cyclone Dust Collector

    Cyclone dust collectors are easily confused with normal dust collectors. These are different and proficient to removing large amounts of harmful dust and rough material particles that are flowing in the air. Cyclone dust collectors can also pick up contaminants before hitting the filter. When it comes to the process of filtration, cyclone ...


    By ProVent, LLC

  • Project profile - Westview Elementary and High Schools Topeka, Indiana arsenic treatment systems

    Background In early 2006, AdEdge Technologies Inc. (AdEdge) teamed up with Hawkins Water Tech to design and implement two full-scale arsenic treatment projects for Westview Elementary School and Westview High School located in Topeka, Indiana. Arsenic concentrations in the school wells range between 21 and 23 ppb, which exceeded the new Federal EPA standard of 10 ppb. Design plans were ...

  • Pump Contract for MARS Tanker. Logistic Support Ship - Case Study

    In 2010 following many months of dialogue with BMT Naval Architects the initial purchase enquiry for the supply of pumps and systems for the 4 new logistic support ships for the U.K RFA (Royal Fleet Auxiliary) was received from the Korean Shipyard DSME. DESMI participated in the tender process from the very beginning and had an open and honest dialogue with both the ...


    By DESMI A/S

  • Maximum Efficiency for...Saving Water

    In an attempt to protect our ecological surroundings and minimize the negative effects of industrial processes, it is necessary to purify and recover the waters used during washing operations of sand washing, quarrying and recycling operations. The first step is to recover 100% of the waters used and to eliminate the concentration of sludge, thus Baioni's solutions aim at offering a full sludge ...


    By Baioni Crushing Plants Spa

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you