automotive emissions monitor Articles

  • Solutions for Automotive Testing

    In recent years, the field of research, development and testing of vehicles has created a need for integrated testing systems which cover the entire vehicle including engine and driveline. These systems also need to be capable of being deployed globally in a supportive structure. As a means of responding to these market requirements, building on our strengths in vehicle emissions measurement ...


    By HORIBA Europe GmbH

  • Fuel saving technology continues to cut automotive manufacturing

    Maxsys Ltd, the Walsall-based provider of the Fuel+ System is poised to further boost carbon reduction figures in the automotive industry, offering a guaranteed energy saving (on gas and oil) of at least 5% - a figure that translates into a significant benefit for large energy consumers in the sector. Emissions for vehicle production have reduced significantly since 2001, decreasing from 1.3 ...


    By Maxsys Fuel Systems Ltd

  • Quantitative analysis of automotive exhaust gas by Fourier Transform Infrared spectroscopy

    For monitoring gaseous emissions from muffler, instruments presently used can only measure quantitatively a given pollutant. Fourier Transform Infrared (FTIR) spectroscopy can provide quantitative and online real time analysis. Calibration of our FTIR spectrometer with CO, CO2, NO, NO2 and N2O was done and the limits of quantification obtained were shown to be as low as 80 ppm. The variation ...


    By Inderscience Publishers

  • Sierra-CP Engineering to present live demonstrations of advanced CADET V14 Software at Automotive Testing China

    Sierra-CP Engineering, a global engine, vehicle and emissions test company, announces they will give live demonstrations of the latest version of their advanced CADET V14 automotive test software, the heart of their system solutions, at this year’s ...


    By Sierra Instruments, Inc.

  • Understanding and Monitoring Hydrocarbons in Water

    Untitled Document 1. Introduction Oil contamination continues to be a very hot topic, due largely in part to recent catastrophic events with shipping ...


    By Arjay Engineering Ltd.

  • Mobile Stationary Source Emissions Testing, Coming to a Facility Near You?

    Last week, Antea Group had the unique opportunity to perform a RATA (relative accuracy test audit) of the emissions from a thermal oxidizer at an ethanol production facility located in Minnesota using a state-of-the-art mobile testing laboratory. During this RATA audit, actual stack emissions levels (including NOx, SOx, CO2, CO, O2, flow rate, temperature, velocity and pressure) from the ...


    By Antea Group - USA

  • Corus installs gem steam traps to improve energy conservation and reduce co2 emissions

    Corus’s Trostre Steel Works in Llanelli, South Wales has installed Thermal Energy International’s GEM Venturi orifice steam traps as part of the plant’s continuous improvement programme into energy conservation and CO2 reduction.  A leading supplier of high quality light gauge steels, the site produces over 400,000 tonnes a year of packaging steels for the UK market. As ...

  • Fast, simultaneous and continuous monitoring of NOx and NH3 in DeNOx applications

    In DeNOx systems using urea injection with ammonia (NH3) as a reducing agent, the flow rate and control of NH3 must be continuously adjusted and controlled to prevent excess NH3 emissions (slip), to reduce environmental impact and cost of reagents. To optimize this process, it is essential to use an emissions analysis system for simultaneous and continuous monitoring of NOx and NH3. For preparing ...


    By Environnement S.A

  • 2013: a ‘perfect storm’ in air quality

    As many countries fail to meet air quality targets and large numbers of premature deaths still result from air pollution, Jim Mills, a particulate monitoring specialist and Managing Director of Air Monitors, explains why 2013 will be a pivotal year. In November 2011 Janez Potočnik, European Commissioner for the Environment, expressed his determination to make 2013 the ‘Year of ...


    By Air Monitors Ltd.

  • Glass Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Energy Savings on Process Heating Units Case History

    The Customer This specialty chemical company is a leading supplier of performance polymers. Their products are used in a wide range of applications including adhesives, coatings, consumer and personal care products, sealants, lubricants, medical, packaging, automotive, paving, roofing and footwear products. The Project The company was increasing the ...

  • More circular economy: How end-of-life vehicle recycling can be improved

    The circular economy package adopted by the European Commission contains numerous measures aimed at promoting resource efficiency and recycling in the EU. Industry representatives are convinced that the recycling of end-of-life vehicles will also benefit from the package. "The measures planned by the European Commission in the field of design and innovation for the circular economy will ...

  • Environics - Reducing calibration gas cost by up to 60%

    EPA's appendix 'M' 40 CFR 51 reduces calibration gas cost by 60%By: Terrence P. Dunn, President of EnvironicsOn May 30, 1995, the EPA published the final version of Method 205 for inclusion in Appendix M of 40 CFR Part 51 entitled, 'Verification of Gas Dilution Systems for Field Instrument Calibrations.' Continuous emissions monitoring systems (CEMS) require ...


    By Environics, Inc.

  • Are self-driving vehicles good for the environment?

    Autonomous transportation has lots of advantages. Reducing greenhouse gas emissions could be one of them. Can autonomous cars be a boon for the environment? The transportation sector is the second largest source of greenhouse gas emissions in the United States, accounting for 27 ...


    By Ensia

  • Thermal deoilers - Thermal deoiling replaces liquid based degreasing

    The Problem A major Automotive company was mandated to have an alternate technology for degreasing evaporator fins. They had, until recently, been deoiling metal parts in a conveyorized solvent based vapor degreasing line, but the state environmental agency mandated that the line be shut down on a certain date due to the excessive water and air pollution it generated. The company had ...


    By Epcon Industrial Systems, LP

  • Climate change, the new industrial policies and the ways out of the crisis

    At its meeting in Stockholm on 20 - 21 Ocotber 2009, the Executive Committee of the European Trade Union Confederation (ETUC) adopted a Resolution on Climate change, new industrial policies and the ways out of the crisis. Weeks before the negotiations in Copenhagen on an international framework on the mitigation of greenhouse gas emissions, we find ourselves confronted by three ...

  • 2nd Progress meeting on the APOLLON project

    2nd Progress meeting on the APOLLON project   Introduction In Piacenza, Italy, has been held the 2nd progress meeting of the APOLON Project, so far the biggest integrated Photovoltaic project of FP7 whose main final objective is the development of point focus (PF) and dense array ...


    By FCBI Energy

  • Taking Fossil Fuels to the Next Level - Standards Underpin Extraction, Processing and Distribution

    To the average person, the oil and gas industry may appear simple — a matter of literally tapping into a natural resource and distributing it to customers. Of course the matter of extraction is rarely simple, and in the case of emergent hydraulic fracturing technology, it is particularly complex and capital-intensive. In fact, the world of petroleum and natural gas extraction, distribution ...


    By ASTM International

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you