automotive shredder residue Articles

  • Automotive Shredder Residue (ASR) - From Waste to Products

    The paper will explain WESA-SLF, a dry-mechanical process to treat ASR with the aim to achieve usable products, mainly organic materials, metals, and minerals. Detail information will be given about the first plant for processing 4 tons per hour ASR which had its start up end of 1999. The experience with the first months in operation as well as with the quality of the products and the influence ...

  • LCA of innovative technology for energy production from automotive Shredder Residue

    Automotive Shredder Residue (ASR) is a problematic waste material remaining after shredding and recovery processes of End of Life Vehicles (ELV). Its heterogeneous grain size and composition make it difficult its recovery or disposal. While ASR accounts for about 20‐25% of the weight of an ELV, the EU's ELV Directive (2000/53/EC) requires that by 2015 a minimum 95% wt. of an end‐of‐life ...


    By John Wiley & Sons, Ltd.

  • Axion waste processing plant training case study 3 – Operators team at automotive shredder residue recycling plant

    Challenge: The recovery process was a unique and complex automotive shredder residue recovery plant. There was a wide range of expertise within the trainee group. Some trainees had worked within the industry for over 10 years, whilst others had worked only 3 months. Plant modification work on site prohibited access to the machinery that the training ...


    By Axion Group

  • Automobile Shredder Residue (ASR) destruction in a plasma gasification reactor

    Test results on Automobile Shredder Residue (ASR), or car fluff, demonstrated destruction efficiency and safe conversion to synthesis gas and a glass residue, in a plasma gasification system. The synthesis gas consists primarily of hydrogen and carbon monoxide in the range between 20 and 22 vol-% respectively, or 45 and 55 vol-% dry basis, when corrected for nitrogen. In dry reforming operation, ...


    By Inderscience Publishers

  • Austin AI QXR-M – Technology to improve metal recovery from non-ferrous residues

    Existing technology has been used for some time to separate light non-ferrous alloys from heavier non-ferrous alloys; however, over the past three years, there is a significant added value in performing additional separations to recover specific high dollar alloys. Examples of such are separating pure copper from copper alloys (brass and bronze) or wrought from cast aluminum. The only way to do ...


    By Austin AI, Inc.

  • Study Charts a Future for Waste-Derived Fuels

    Pointers to possible future EU policy initiatives to give co-incineration facilities burning waste-derived fuels a strategic role in waste management have emerged in a study for the European Commission.1 The report suggests a policy focus on promoting source separation of municipal wastes, active discouragement of mass burn incinerators, and a levelling of the regulatory playing-field for ...

  • Can today’s unrecyclables become tomorrow’s resources?

    Labelling some plastic waste products as ‘unrecyclable’ and consigning them to landfill or energy-from-waste plants risks losing the opportunities to recover these raw materials in the future, warns a leading UK-based plastics recycler. Axion Polymers suggests that while some plastic might be considered ‘unrecyclable’ today, given the rate of progress in resource recovery ...


    By Axion Group

  • Refuse Derived Fuel, Current Practice and Perspectives

    Untitled Document Summary I OBJECTIVES The objectives of the project were to undertake a survey on the current ...

  • Suez Regene Atlantique, France - Case Study

    SUEZ Regene Atlantique is a French plant owned by the SUEZ group which specializes in the recovery and recycling of PET (Polyethylene Terephthalate) bottles. During 2013, the company received a sizable strategic investment which was specifically earmarked to modernize and improve its optical sorting process for bottle recycling. This planned upgrade was to be accomplished via the purchase of new ...


    By TOMRA Sorting GmbH.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you