baghouse dust collector Articles

  • Improving the cleaning cycle in baghouse collectors

    ABSTRACT: Background The reverse pulse jet baghouse has been around for over 45 years and the cleaning cycle has not changed very much since that time. The cleaning cycle is the most important part of the dust collector because it controls efficiency and media life. In a generic baghouse, the cleaning system is comprised of a blowpipe that is located typically approximately three inches above ...


    By Scientific Dust Collectors

  • Advantages of cleaning without a venturi in baghouse collectors

    ABSTRACT: Background The cleaning cycle is the most important part of the dust collector because it controls efficiency and media life. In order to clean a row of bags in a reverse pulse jet baghouse first the flow of filtered air must be momentarily stopped and then back flushed or “induce” air to knock the dust cake off the outside of the filter media. A venturi at the top of the ...


    By Scientific Dust Collectors

  • How To Avoid Dust Explosions In Your Baghouse

    A massive fire and explosion in the dust collection system of a New Hampshire wood pellet manufacturer demonstrates the need for adequate system design to prevent combustible dust explosions in general industry.  We recently published a news article on Environmental-Expert.com about OSHA’s enforcement actions concerning last year’s combustible dust fire and explosion at the ...


    By Baghouse.com

  • Ineffective cleaning in generic baghouses

    ABSTRACT: Background In a typical “generic” baghouse application, the cleaning is accomplished by back-flushing the filter with compressed air that travels through an orifice hole in a purge tube (blow pipe) and through a venturi. A typical generic cleaning system allows dust to be filtered at an air-to-cloth ratio of 5:1. That means for every 5 CFM of airflow, there is 1 square foot ...


    By Scientific Dust Collectors

  • Surrette Battery Co. Replaces Baghouse with Whirl Wet Dust Collector for Pasting Operation.

    Surrette Battery Company Limited, Springhill, Nova Scotia is a leading lead-acid battery manufacturer, and Canada's only independent battery manufacturer. The battery company manufactures long-life, true 'deep cycle' battery systems for railroad, marine, industrial and renewable energy applications. Surrette Battery wanted a corrosion-free system that would withstand acid fumes from a paste mixer ...


    By Tri-Mer Corporation

  • Baghouse dust collector helps improve casting process one step at a time case study

    Cascade Dafo, Fernadale, Wash., designs and manufac- tures dynamic ankle and foot orthoses (orthotic braces) to help im- prove the mobility of children and adults with neuromuscular chal- lenges. In the past, the company used a cartridge dust collector to collect dust generated during the finishing step of a manual plaster-casting process. When the company auto- mated the casting process, it ...


    By Scientific Dust Collectors

  • Horween Leather: Whirl / Wet Dust Collector Combines a High Efficiency Wet Dust Collection with Low Maintenance and Operating Costs.

    For leather fines and other lightweight, porous materials, dry collection has been thought to be preferable to wet because of the material’s buoyancy. Horween Leather Company challenged that assumption. Originally, two baghouse systems collected particulate, but problems arose with each baghouse. First, cold winter dryness caused high levels of static electricity. Resultant sparks in the ducts ...


    By Tri-Mer Corporation

  • Whirl/Wet Dust Collectors Preferred for Pharmaceutical Overspray Collection

    A major multi-national manufacturer of pharmaceuticals and vaccines chose Whirl Wet technology for a new pill coating operation. The aqueous-based sugar solution created heavy loadings of sticky overspray in the 3 micron range. This blinded the existing baghouses after just six batches despite the use of PTFE cartridges – (the best available option for baghouses used in this type of application.) ...


    By Tri-Mer Corporation

  • How to Avoid Undersizing a Dust Collection System

    Baghouse manufacturers often recommend undersized systems to undercut others for your business. How can you avoid buying a undersized baghouse that won't work?  Dust collector OEMs constantly try to come in with bids lower than competitors. In an attempt to do so, some baghouse manufacturers offer undersized systems. One recent experince highlights the dangers of allowing manufacturers' ...


    By Baghouse.com

  • Reduction in Airborne Dust and Cleaning Costs: Sale of Waste Limestone Dust - Blue Circle Southern Cement, Limestone Mine

    Background The Marulan South limestone mine is part of the Blue Circle Southern Cement company. It is situated on the edge of the Shoalhaven River gorge adjoining the Morton National Park 380 km south west of Sydney. The company supplies limestone to cement plants at Berrima and Maldon as well as the BHP steelworks at Port Kembla. The mine has a total production of three ...


  • To prevent blinding in dust collection systems, consider filter type, filter size and selection of the filter media used

    All dust collection systems, regardless of size, share a common problem—dust blinding. Simply stated, blinding is defined as when dust particles plug the holes in a filter and stop the flow of air through the filter, resulting in the dust collector performing poorly. All types of collectors, whether stand-alone units, cyclones or full-scale baghouses, are subject to blinding. To better ...


    By American Fabric Filter Co

  • New Nozzle Technology “Cleaning More with Less”

    This technical paper will explain the new nozzle technology developed by Scientific Dust Collectors that allows high air-to-cloth ratio baghouses to use 80psig of compressed air instead of the industry standard 100psig.   The reverse pulse jet baghouse has been around for over 50 years and the cleaning cycle has not changed very much during that time. The cleaning cycle is the most important ...


    By Scientific Dust Collectors

  • Manufacturing facility cleaning case study

    The Challenge A large Industrial manufacturing facility found that their process used to perform the necessary tasks was creating an undesirable accumulation of heavy metals dust throughout the entire plant. Not only was this a potential health risk to the plant workers, there was a structural and safety problem because the dust could spark and cause a fire or explosion. ...


    By Enviro-Vac Corp.

  • Asbestos contaminated soil case study

    An active gypsum manufacturing facility discovered they had a large area of gypsum waste containing asbestos mixed with soil at the back of their property. The waste had accumulated over the years before the dangers of asbestos were known and now required remediation due to communication wires buried in the waste. Excavators could not be used due to the presence of the communication wires that ...


    By Enviro-Vac Corp.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you