ball check valve Articles

  • 100 Simple Ways To Save Water

    To improve water conservation install a rain sensor, it turns off your irrigation when it rains. Use a weather-based controller. The use of smart controllers can reduce water usage 24% a year on average. Learn about available rebate programs ...


    By Jain Irrigation, Inc

  • Top 8 things to check when maintaining a Pressure Reducing Valve

    Like every other piece of mechanical equipment we use, a control valve does require some maintenance. As budgets are stretched and time is tight, it can be tempting to ignore checking on valves that are often located in underground vaults and give years of operation without complaint, but eventually like everything else, they will fail. This article looks at 8 simple steps that if undertaken ...


    By Singer Valve Inc.

  • Healthy Control Valves

    A simple maintenance routine can help ensure trouble-free valve operation. Whether the control valve in your system is the first one that has required maintenance or if you are experienced with maintaining multiple valves in your system, some simple guidelines can help keep them operating at optimal performance. Physically checking all valves at least every 12 weeks is important, assuming that ...


    By Singer Valve Inc.

  • Keeping Your Control Valves in Good Health

    Whether that brand new control valve in your system is the first one you have ever had to look after or if you are an old hand at valve maintenance with tens of valves in your system, there are a few simple guidelines and reminders for keeping it operating at optimal performance. It’s important to physically check valves at least every 12 weeks or so, assuming everything is running fine in ...


    By Singer Valve Inc.

  • Don’t Let Your Control System Control You

    Regular maintenance ensures valves remain healthy. If your system is operating properly, you should physically inspect all valves at least every 12 weeks to check for tubing leaks and other abnormalities. Pressure gauges should be checked to ensure each valve is performing as designed. If you find something wrong, refer to the appropriate instruction manual, which may be available online. Because ...


    By Singer Valve Inc.

  • Top 5 Causes for AODD Pump Failure

    1.       Air Valve Stalling, Clogging or Leaking: Stalling of the air valve often has to do with the design of the airways inside the valve. If the design in less than optimal it will stall under certain conditions. Same can be said about leakage of air where the air mostly blows through the valve instead of being redirected to push the diaphragm. Clogging on the other hand ...


  • Pumps’ chemical resistance, simple design help reduce downtime at trinity river water plant

    The Trinity River Authority’s Huntsville, Texas, Regional Water Supply System (HRWSS) provide six million gallons per day of portable water to 28,000 area residents. Each day, 330 gallons of alum are added to incoming river water to remove mud and suspended solids, along with 200 gallons of 50% caustic soda to raise the water’s pH level. In the past, the corrosive nature of the ...

  • Is your metering diaphragm pump having self-priming problems?

    Dosing sodium hypochlorite, fluoride, and alum There is a simple and 100% interchangeable alternative to solve your problems. Same footprint as competing diaphragm pumps. All ancillaries reused Mounting shelf Platform All suction and discharge piping Appurtenances like gauges and valves ...

  • Whole Life Costs and pumping Technology – Peristaltics Increasingly Out on Top

    Untitled Document Whole life costs are playing an ever-more important role in pump selection by the water and wastewater industry. Interestingly, energy use is no longer the ...

  • Hydroflo diaphragm pumps help reduce boiler corrosion and maintenance costs

    ABTCo, located in Alpena, Michigan, is a decorative wood paneling producer using three boilers to generate 7 MW of electricity – half the power needed in the plant plus steam for pulp processing. As in many boiler operations, the main enemy is corrosion, which can destroy system components and lead to boiler failure. Although internal boiler surfaces are protected by a film of magnetic ...

  • Chemical metering pumps solve CP&L’s demineralization problem

    In order to solve a plugging problem in injection system of its coal-fired Lee plan in Goldsboro, NC, Carolina Power & Light Co. replaced the system with two chemical metering pumps. The two chemical metering pumps, made by Hydroflo Corp., have withstood continuous exposure to regenerating chemicals for almost ten years and have required minimal maintenance to the utility. Lee ...

  • On the Ground with Diesel Corrosion - Case Study

    When the EPA revealed the results of its study in July on the increasing presence of substantial corrosion in diesel fuel tanks, it proved that the problem is much larger than anyone anticipated. The facts are staggering: 83%of the diesel tank systems exhibited moderate-to-severe corrosion. 75%of the owner/operators of those diesel tanks had no idea it was ...


    By Tanknology Inc.

  • Drum mixer compounds wide range of particles... and a modified paddle mixer solves a tricky problem

    In 1985 Mortex Manufacturing Co., Inc., bought a new rotary drum mixer in anticipation of expanding its line of chemical additives that are used to make decorative, nonskid coatings for concrete around swimming pools and on patios. The additives are mixed with white cement and white ...

  • Rolled Filters Move Filtration in a New Direction

    When selecting filtration technology, industrial users have long wrestled with the tradeoffs of dirt-holding capacity versus particle selectivity or quick-and-dirty change-outs versus process time. For many applications, a self-contained rolled filter offers an effective solution to both problems. Constructed with polypropylene hardware and various media in a spiral-wound design, rolled filters ...

  • Sustainable wastewater separation treatment systems coupled with nutrient and water reducing greywater reuse technologies

    Nationally and internationally, pressure is increasing to introduce nutrient reducing, water conserving and recycling measures for sustainable residential and small community water/wastewater systems. Reports of inadequate water quality and quantity are being reported daily. Over the past thirty years the federal government and State of Alaska have invested over 4 billion dollars installing piped ...


    By Equaris Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you