belt filter Articles

  • Simulation of sludge dewatering on belt filters

    A mathematical model for belt filters was developed to determine optimum load rate and belt speed during drainage of flocculated biological sludge. Numerical simulations were performed for belt filters with and without plows, and the model fit experimental data well. Experiments showed that highly compressible cakes were formed during drainage, which was important. Due to cake compression, the ...


    By IWA Publishing

  • City of Orlando Wastewater Treatment Plant Belt Filter Press Struvite Scale Control & Enhanced Flocculation case study

    Five month evaluation of Hydropath technology’s ability to treat magnesium ammonium phosphate hexahydrate (Struvite, NH₄MgPO₄•6H₂O) scale and to enhance flocculation resulting in reduced polymer usage Location: City of Orlando Wastewater Treatment Plant. Address: 5100 LB McLeod Rd., Orlando, FL 32811 Application: Struvite accumulation in ...


    By HydroFLOW USA

  • Custom-designed belt skimmer meets unique needs of large international automaker

    Graham Smith, a sales engineer for the UK division of Abanaki Corporation, Oil Skimmer Division, headquartered in Chagrin Falls, OH, was called upon by a large Japanese automaker with operations in Europe to solve a unique problem—retrieving automotive wax and reclaiming water at the end of an extremely busy production line. The engineer discovered a unique situation. At the end of the ...


    By Abanaki Corporation

  • Rotating belt sieves for primary treatment, chemically enhanced primary treatment and secondary solids separation

    Fine mesh rotating belt sieves (RBS) offer a very compact solution for removal of particles from wastewater. This paper shows examples from pilot-scale testing of primary treatment, chemically enhanced primary treatment (CEPT) and secondary solids separation of biofilm solids from moving bed biofilm reactors (MBBRs). Primary treatment using a 350 microns belt showed more than 40% removal of ...


    By IWA Publishing

  • Size reduction of filter cakes with the Gericke Nibbler

    Application: Separating solids from a suspension by filtering, centrifuging or drying. Then shredding of the filter cake. Process: The suspension is pumped into the press. The solid particles are deposited on the filter medium and form filter cakes on the filter plates. To press as much liquid as possible out of the filter cake, the plates are compressed at high pressure by a hydraulic press. ...


    By Gericke

  • Milling filter cakes - Cutting instead of pressing to achieve more uniform particle size

    There are various methods of separating solids from a suspension. These include filtration, centrifuging and drying. In most cases, further processing of the resulting products cannot be carried out directly. They have to be reduced to the right particle size by means of a mill. This can be done with a Gericke Nibbler, which shreds the filter cakes efficiently using a basket and screen assembly. ...


    By Gericke

  • A New, Real Technology for Solids Dewatering

    Over the past decade, there have been few significant improvements to the performance in sludge dewatering technologies. Most improvements, other than process optimizations from the polymer industry, have been minor adaptations to the various dewatering technologies such as adding additional pressure rollers or modifying the diameters of pressure rollers on a belt filter press. The adoption of ...

  • Liquid Filtration and Media World Markets Report

    Provides analyses & forecasts for belt presses, automatic back wash filters, filter presses, bags, leaf, drum and sand filters in each of 80 countries segmented into 10 industry segments. Analysis and forecasts of media is also included. In this fast changing market place it is necessary to have information as current as Tuesday, November 17, 2009 . Find out how this report reflects the ...


    By The McIlvaine Company

  • WWTP Quesna, Mubarak Industrial City

    During Phase I of the project, DEWACO delivered a complete sludge dewatering solution for comprising of: 3 nos. Belt Filter presses type NPD31L (3.1m belt width) and all other peripheral equipment including polymer preparation and post dilution, pups, conveyors, PLC etc. for dewatering and 4 sets of chain and flight type sludge and scum collectors ( dimensions: 36m L x 5,5m W x 2,35m ...


    By Dewaco Ltd

  • OEM Wear Strip solution - Case Study

    The Client Challenge Wear strips were needed for a sliding filter belt. In this particular application, a vacuum is applied from the underside of the assembly, through the filter belt and also through the slide wear strip, pulling the filtered material through the filter belt as it conveys down the wear strips. Multiple wear strips are joined to each other, end on end, to reach lengths of ...


    By Diversified Plastics, Inc.

  • Hoosac WQD Williamstown, MA

    An aging primary and secondary treatment facility coupled with increased loadings to the co-settling primary clarifier resulted in the need to upgrade the Hoosac WQD. An important component of the upgrade was biosolids handling. Tighe & Bond selected the belt filter press as the bases of design for this 5.37 MGD average daily flow facility. The co-settled primary and secondary sludge is ...


    By BDP Industries

  • Xiaohongmen WWTP south-east Beijing

    The second biggest sewage treatment plant in Beijing Capacity of plant Wastewater Treatment Plant: 600,000 m³/d Sludge production: volume of 60,000 m³/d DEWACO delivered a complete sludge dewatering solution consisting of: 8 nos. Belt Filter Press type NPD31L, 3,1m belt width, along with peripheral equipment. Project ...


    By Dewaco Ltd

  • Creative skimmer solution endures environment and reduces costs

    WCI Steel, a steel manufacturer in Warren, Ohio, needed an uncommon solution to a fairly common problem - removing grease and other contaminants from their outdoor circulating water system. They turned to Abanaki Corporation, Oil Skimmer Division in Chagrin Falls, Ohio for the answer. Each week, WCI Steel uses 200 gallons of grease on a roll out table to keep steel slabs from rolling off the ...


    By Abanaki Corporation

  • Impact of fine mesh sieve primary treatment on nitrogen removal in moving bed biofilm reactors

    The purpose of this project was to investigate the effect of selective particle removal during primary treatment on nitrogen removal in moving bed biofilm reactors (MBBRs). Two small MBBR pilot plants were operated in parallel, where one train treated 2 mm screened municipal wastewater and the other train treated wastewater that had passed through a Salsnes Filter SF1000 rotating belt sieve ...


    By IWA Publishing

  • Village of Maybrook, NY Sludge Dewatering System

    Project Summary: The Village of Maybrook WWTP process consists of primary clarification, trickling filters, and secondary clarification. Primary sludge and trickling filter humus is anaerobically digested. The belt filter press dewaters the sludge eliminating the need for sludge drying beds. The belt filter press discharge cake solids are consistently in the 25 to 30 percent range, which is ...


    By BDP Industries

  • Screening options - You may never be able to make the wrong choice again!

    Ready for release this year, Arlat will be adding a new series of screens to their product line. Built around the popular ‘TS’ design, the Multi-screen will provide options for engineers and operators at the beginning of the project as well as anytime in the future. Designers and Engineers that are not willing to ‘mess with success’ can use a traditional bar screen along with the MR belt, which ...

  • Metropolitan Sewer District (MSD), Cincinnati, Ohio U.S.A.: HTFB System

    The Metropolitan Sewer District (MSD) of Greater Cincinnati, Ohio is a 90 mgd primary treatment, 55 mgd activated sludge treatment plant. Solids processing includes gravity thickening of primary sludge, dissolved air flotation, thickening of secondary sludge, holding tank storage, belt filter press dewatering and pumping of cake to the old outdated multiple hearth ...

  • Woodstock WWTP Town of Woodstock, VA

    The Town of Woodstock was hauling liquid sludge to a regional plant which was having difficulty handling the high solids loading to their own plant. Woodstock needed of a temporary dewatering solution and decided to control their destiny by purchasing or renting dewatering equipment. With a growing town and an upcoming facility expansion, the plant had no building for equipment and decided that a ...


    By BDP Industries

  • Nippoh Chemicals CO.,LTD - Case Study

    Let it does job for you! VOLUTE frees operator from maintenance. Operators had to make frequent check-up and maintenance with the existing belt filter press before introducing the VOLTUE Dewatering Press. Sludge condition changed time to time that dilute sludge often spilled over from the side of filter cloth, making operators to clean up machine every three hours. ...


    By AMCON Inc.

  • Let it do the job for you! VOLUTE frees operators from maintenance (Japan)

    Nippoh Chemicals Co., Ltd. Problem Operators had to make frequent check-ups and maintenance with the existing belt filter press before introducing the VOLUTE Dewatering Press. Sludge conditions changed time to time so that diluted sludge often spilled over from the side of the filter cloth, making operators have to clean up the machine every three hours. ...


    By AMCON Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you