belt filter press Articles

  • City of Orlando Wastewater Treatment Plant Belt Filter Press Struvite Scale Control & Enhanced Flocculation case study

    Five month evaluation of Hydropath technology’s ability to treat magnesium ammonium phosphate hexahydrate (Struvite, NH₄MgPO₄•6H₂O) scale and to enhance flocculation resulting in reduced polymer usage Location: City of Orlando Wastewater Treatment Plant. Address: 5100 LB McLeod Rd., Orlando, FL 32811 Application: Struvite accumulation in ...


    By HydroFLOW USA

  • Overhaul frequency of a dewatering press decreased at a milk and dairy products plant

    Problem This plant used a belt press to dewater their waste activated sludge from their membrane bioreactor. However the equipment frequently caused clogs and the operator needed to replace the filter cloth once every 3 months. The labor and cost for the replacement of the filter cloth caused problems for the operator. Client's voice We used ...


    By AMCON Inc.

  • VOLUTE Dewatering Press reduces maintenance time sharply! (Japan)

    Komagata Foods Co., Ltd. <Problem> Komagata Foods Co., Ltd., manufacturing feed for fish cultivation, used to use a belt filter press, but they had always faced clogging problems because of the oily sludge. They also suffered from spillage over from the side of filter cloth, making operators to keep their eyes on the machine all day. <AMCON's offer for ...


    By AMCON Inc.

  • The Volute Dewatering Press Purchased Repeatedly, Plays a Very Important Role at a Tofu Factory.(Japan)

    Otokomae Tofu Inc. Otokomae Tofu Inc. develops, manufactures and sells Tofu (Soybean Curd), with impressive product names. They installed the second Volute Dewatering Press in their Kiyosato factory, following the first one installed in their Kyoto factory. We interviewed the responsible person to take care of the whole wastewater treatment plant to ask the reason why they have become our ...


    By AMCON Inc.

  • A New, Real Technology for Solids Dewatering

    Over the past decade, there have been few significant improvements to the performance in sludge dewatering technologies. Most improvements, other than process optimizations from the polymer industry, have been minor adaptations to the various dewatering technologies such as adding additional pressure rollers or modifying the diameters of pressure rollers on a belt filter press. The adoption of ...

  • Liquid Filtration and Media World Markets Report

    Provides analyses & forecasts for belt presses, automatic back wash filters, filter presses, bags, leaf, drum and sand filters in each of 80 countries segmented into 10 industry segments. Analysis and forecasts of media is also included. In this fast changing market place it is necessary to have information as current as Tuesday, November 17, 2009 . Find out how this report reflects the ...


    By The McIlvaine Company

  • Hoosac WQD Williamstown, MA

    An aging primary and secondary treatment facility coupled with increased loadings to the co-settling primary clarifier resulted in the need to upgrade the Hoosac WQD. An important component of the upgrade was biosolids handling. Tighe & Bond selected the belt filter press as the bases of design for this 5.37 MGD average daily flow facility. The co-settled primary and secondary sludge is ...


    By BDP Industries

  • J.C. Chambers WWTP City of Berea, KY

    The City of Berea was operating with outdated belt press technology which had high maintenance requirements and inadequate operating capacity. During the latest expansion of their facility, the plant evaluated various options for increasing the hydraulic throughput and reliability of their dewatering system. BDP was the press of choice due to the superior performance of the 3DPTM belt filter ...


    By BDP Industries

  • Let it do the job for you! VOLUTE frees operators from maintenance (Japan)

    Nippoh Chemicals Co., Ltd. Problem Operators had to make frequent check-ups and maintenance with the existing belt filter press before introducing the VOLUTE Dewatering Press. Sludge conditions changed time to time so that diluted sludge often spilled over from the side of the filter cloth, making operators have to clean up the machine every three hours. ...


    By AMCON Inc.

  • Nippoh Chemicals CO.,LTD - Case Study

    Let it does job for you! VOLUTE frees operator from maintenance. Operators had to make frequent check-up and maintenance with the existing belt filter press before introducing the VOLTUE Dewatering Press. Sludge condition changed time to time that dilute sludge often spilled over from the side of filter cloth, making operators to clean up machine every three hours. ...


    By AMCON Inc.

  • WWTP Quesna, Mubarak Industrial City

    During Phase I of the project, DEWACO delivered a complete sludge dewatering solution for comprising of: 3 nos. Belt Filter presses type NPD31L (3.1m belt width) and all other peripheral equipment including polymer preparation and post dilution, pups, conveyors, PLC etc. for dewatering and 4 sets of chain and flight type sludge and scum collectors ( dimensions: 36m L x 5,5m W x 2,35m ...


    By Dewaco Ltd

  • Waste Water Treatment Plant City of Oakley, UT

    The City of Oakley was very happy with their new MBR facility except for the filter bag sludge dewatering system that was very labor intensive and usually didn’t produce an adequately dewatered sludge. Scott Rogers of Aqua Engineering and Bob Johnson, the Operations Mgr., chose to replace the bag system with a 0.9 meter model DDP belt press system from BDP Industries. The DDP belt press ...


    By BDP Industries

  • Xiaohongmen WWTP south-east Beijing

    The second biggest sewage treatment plant in Beijing Capacity of plant Wastewater Treatment Plant: 600,000 m³/d Sludge production: volume of 60,000 m³/d DEWACO delivered a complete sludge dewatering solution consisting of: 8 nos. Belt Filter Press type NPD31L, 3,1m belt width, along with peripheral equipment. Project ...


    By Dewaco Ltd

  • Woodstock WWTP Town of Woodstock, VA

    The Town of Woodstock was hauling liquid sludge to a regional plant which was having difficulty handling the high solids loading to their own plant. Woodstock needed of a temporary dewatering solution and decided to control their destiny by purchasing or renting dewatering equipment. With a growing town and an upcoming facility expansion, the plant had no building for equipment and decided that a ...


    By BDP Industries

  • Metropolitan Sewer District (MSD), Cincinnati, Ohio U.S.A.: HTFB System

    The Metropolitan Sewer District (MSD) of Greater Cincinnati, Ohio is a 90 mgd primary treatment, 55 mgd activated sludge treatment plant. Solids processing includes gravity thickening of primary sludge, dissolved air flotation, thickening of secondary sludge, holding tank storage, belt filter press dewatering and pumping of cake to the old outdated multiple hearth ...

  • Village of Maybrook, NY Sludge Dewatering System

    Project Summary: The Village of Maybrook WWTP process consists of primary clarification, trickling filters, and secondary clarification. Primary sludge and trickling filter humus is anaerobically digested. The belt filter press dewaters the sludge eliminating the need for sludge drying beds. The belt filter press discharge cake solids are consistently in the 25 to 30 percent range, which is ...


    By BDP Industries

  • Wastewater Treatment Plant MSD of Buncombe County, NC

    The Metropolitan Sewerage District of Buncombe County was faced with high maintenance cost of existing equipment, poor reliability and increased incinerator cost. After extension research into dewatering options, it was determined that the most economical dewatering system was on-site dewatering with a belt filter press. BDP was the press of choice due to the 3DPTM belt filter press superior ...


    By BDP Industries

  • Komagata Foods Co., Ltd. case study

    VOLUTE Dewatering Press reduces maintenance time sharply! Komagata Foods Co., Ltd., manufacturing feed for fish cultivation, used to use a belt filter press, but they had always faced clogging problems because of the oily sludge. They also suffered from spillage over from the side of filter cloth, making operators to keep their eyes on the machine all day. AMCON's ...


    By AMCON Inc.

  • Paint

    Problem: A paint manufacturer, that produces both oil and water based paints, needed help to solve their liquid sludge problem. At that time the wastewater was batch treated and consisted of a chemical addition process followed by settling. This was to be changed in the near future to a continuous type treatment system. The settled sludge consistency varied form 5% to 10%. The ...


    By HydroCal Inc.

  • Wyeth case study

    Paddle Dryer turns waste into income for food processing plant. A northeast food processor turns its activated biological sludge waste from its manufacturing process into income by recycling the waste as an ingredient for organic fertilizer. When the state banned landfilling of the biological waste, a study was conducted that showed the waste contained enough nutrients to be ...


    By Komline-Sanderson

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you