bentonite pump Articles

  • Case study - pumping bentonite

    Location: Germany Year: 2009 Working Context description The project is the construction of a big commercial and residential area in northern Germany during foundations phase. Diaphragm walls and Cut Off Walls are a techniques for the construction of permanent or temporary in-situ impermeable barriers. In order to stabilize side walls bentonite ...


    By Dragflow S.r.l.

  • Case study - pumping bentonite

    Location: Germany Year: 2009 Working Context description The project is the construction of a big commercial and residential area in northern Germany during foundations phase. Diaphragm walls and Cut Off Walls are a techniques for the construction of permanent or temporary in-situ impermeable barriers. In order to stabilize side walls ...


    By Dragflow North America

  • APEX hose pumps replace PC pumps for reliable bentonite pumping at South African waterworks

    A major waterworks in South Africa is benefitting from the installation of Bredel APEX15 hose pumps from Watson-Marlow Fluid Technology Group. The APEX pumps have been preferred over progressive cavity (PC) pumps ...

  • Mono on the move with sintec

    Mono’s Widethroat W range pump forms an essential part of Sintec’s mobile system by pumping the thicker groutmixes more quickly and efficiently. Once the mobile system is in-situ and drilling of an exploratory hole is almost complete, a mixer combines the bentonite/cement grouts to form bentonite slurry. This is then transferred by the W Range pump to the holdingtank ready for injection into the ...

  • Case study - drilling operations

    Location: New Zeland Year: 2010 Working contest The pond is on a drilling rig site. The rig is used for Geo-thermal power exploration. The Problem Pumping heavy slurry: bentonite, geo-thermal minerals, drilling fluid, sand, pumice. Performance of sucker trucks where unsatisfactory. ...


    By Dragflow North America

  • Case study - drilling operations

    Location: New Zeland Year: 2010 Working contest The pond is on a drilling rig site. The rig is used for Geo-thermal power exploration. The Problem Pumping heavy slurry: bentonite, geo-thermal minerals, drilling fluid, sand, pumice. Performance of sucker trucks where unsatisfactory. Our ...


    By Dragflow S.r.l.

  • Installation of a deep drainage trench by the bio-polymer slurry drain technique

    Introduction An underground diesel fuel spill at a county bus maintenance facility in San Jose, California was successfully remediated by constructing a pair of 50 feet deep, gravel-filled extraction trenches. Well casings with ejector pumps were set into the trenches for withdrawing the diesel fuel contaminated groundwater to a small, onsite treatment plant. Severe access restraints, the ...


    By Geo-Con, Inc.

  • Drilling Mud Circulation System

    As more utility contractors are moving up to larger rigs, they are also moving toward the use of solids removal ( solids control ) systems. These solids control systems are not stand-alone units. They are part of the drilling mud system along with the ...


  • Drilling Mud and Mud Circulation System

    As more utility contractors are moving up to larger rigs, they are also moving toward the use of solids removal ( solid control ) systems. These solid control systems are not stand-alone units. They are part of the drilling fluids system along with the drilling fluid and the fluid pump. ...


  • Multilevel Systems

    Untitled Document Introduction A multilevel system is a groundwater monitoring device which allows ...


    By Solinst Canada Ltd.

  • World War II Memorial, DC - Case Study

    In 2003, AdEdge Water Technologies began working closely with EarthTech, the assigned engineering firm responsible for specifying and selecting the various water treatment systems serving the new National World War II Monument in Washington, DC. Stormwater and groundwater control and treatment are essential aspects of this project given the location of the site on the Mall adjacent to the ...

  • Groundwater Contamination Plume Remediation - Case Study

    19 CMT Multilevel Systems Successfully Installed in Challenging  A facility in Pontypool, Wales, UK was once the location of a plastic forming plant. Over time, chemicals produced through the plastic forming processes were lost into the groundwater beneath the facility, creating a large contaminant plume. Years later it was determined that the plume is ...


    By Solinst Canada Ltd.

  • Oil and Gas Development - Onshore Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • EPA studies identify techniques for critical leak testing prior to soil-vapor sampling

    Researchers at EPA’s National Risk Management Research Laboratory (NRMRL) in Ada, OK, are developing quality assurance (QA) measures for soil-gas and sub-slab sampling methods that help differentiate contaminant vapors due to vapor intrusion from background sources. Recent research focused on measures to identify leakage of ambient air into conventional vapor probes, which can significantly ...

  • Dredging Abrasive Materials? Learn about SRS Crisafulli’s New Dredge

    The Rotomite-6000-C, SRS Crisafulli’s newest self-propelled dredge, broadens the Rotomite-6000’s capabilities to include removal of highly abrasive materials. The Rotomite-6000-C also increases the customer’s return on investment (ROI) by cutting sludge ...


    By SRS Crisafulli, Inc.

  • Drilling Mud in Horizontal Directional Crossing Project

    Horizontal Directional Crossing Project has a not long development in the country and even the world. But in recent years, pipeline horizontal directional crossing has been great development, large-scale construction of oil and gas pipelines across the length and across the diameter of the continuous creation of new records. In horizontal directional crossing project, the drilling mud play a very ...


  • Storing Heat Underground

    Underground thermal energy storage (UTES) is a system that uses inter-seasonal heat storage, storing excess heat from the summer for use in winter heating, and the cooling potential from winter for cooling in summer. A cost-effective, low-energy and low-risk proven renewable technology, UTES reduces carbon emissions by up to 60% and is becoming an increasingly popular choice for residential, ...


    By Boode Waterwell Systems

  • Multilevel Groundwater Assessment of Confining Unit in a Bedrock Sequence near Sarnia, Ontario

    Untitled Document INTRODUCTION Two sites in southern Ontario were studied through instrumentation ...


    By Solinst Canada Ltd.

  • World War II Memorial, DC Iron & Manganese Reduction - Case Study

    In 2003, AdEdge Water Technologies began working closely with EarthTech , the assigned engineering firm responsible for specifying and selecting the various water treatment systems serving the new National World War II Monument in Washington, DC. Stormwater and groundwater control and treatment are essential aspects of this project given the location of the site on the Mall adjacent to the ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you