biodiesel blend analyser Articles

  • Get Comparable ASTM/EN Data for Biodiesel Blend Measurements While Saving Time and Money using Portable IR Analyzers

    Both EN 14078 and ASTM D7371 methods for measuring the percent biodiesel in diesel fuel use infrared analysis as the analytical method and are based around using an FTIR spectrometer which has the capability to do a multitude of analyses besides the biodiesel in diesel measurement. This is great for a laboratory where various biofuels measurements are required. However, if the only measurement ...


    By Spectro Scientific

  • Biodiesel Analysis with Mid Infrared - From Feedstock to Fuel

    Introduction The biofuels industry is growing rapidly and so is the need for analysis to ensure quality product. The parameters for quality biodiesel require different types of instruments and measurement systems, such as gas chromatographs (GC), titrators, centrifuges, infrared spectrometers... Although claims are out there for the analyzer that will do it all, unfortunately there is no one ...


    By Spectro Scientific

  • Comparison of EN 14078 and ASTM D7371 infrared biodiesel methods

    Infrared (IR) analysis is the most widely used measurement technology for measuring biodiesel in diesel. Both EN 14078 and ASTM D7371 methods use infrared as the analytical method and more specifically FTIR (Fourier Transform Infrared) spectroscopy. Infrared is a common spectroscopic technique used for quantitative and qualitative analysis. In the biodiesel measurement, the fatty acid methyl ...


    By Spectro Scientific

  • Experimental investigations on diesel engine fuelled with methyl esters of cotton seed oil

    In this investigation, cotton seed methyl ester (CSME) was prepared by transesterification using potassium hydroxide (KOH) as catalyst. The engine performance was analysed with different blends of biodiesel and was compared with neat diesel. It was concluded that the lower blends of biodiesel are closer to diesel as far as thermal efficiency is concerned. In the lower blends, the brakes specific ...


    By Inderscience Publishers

  • Simplified biofuels measurements with portable mid infrared analyzers

    Product quality begins at the production facility and extends to consumer filling station. Some process control or quality verification analyses can be done with quick and simple verification tests while others require more complete tests according to the ASTM or EN approved methods. Many crucial measurements can be performed by mid-infrared (IR) analysis. These measurements include free fatty ...


    By Spectro Scientific

  • Cetane Number and Cetane Index

    This article summarises the findings of an Energy Institute (EI) sponsored Technical Development Project carried out by Cliff Lilley Consultancy, and outlines a review of the suitability of the current cetane index equation used in IP 380 Calculation of Cetane Index of middle distillates by the fourvariable equation (EN ISO 4264) (ASTM D 4737 procedure A**) for calculating Cetane Index (CI), to ...


    By Energy Institute (EI)

  • Combustion, performance and emission analysis of diesel engine fuelled with methyl esters of Pongamia oil

    The methyl esters of vegetable oils, known as biodiesel are increasingly becoming popular because of their low environmental impact and potential as a green alternative fuel for diesel engine, and that they would not require significant modification of existing engine hardware. Methyl ester of Pongamia oil (PME) is derived through transesterification process. Experimental investigations have been ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you