biodiesel blending Articles

  • OILmiser biodiesel blending systems

    This two day event saw an international mix of government officials, company executives, MRO service personnel and individuals, all interested in the manufacture, supply, distribution and, ultimately, the end use of biodiesel fuels. It was abundantly clear that the science and technology, as well as the infrastructure for the manufacture of biodiesel fuel is a well established reality. Clear too, ...


    By JLM Systems Ltd

  • Meeting the challenges of biodiesel blend measurements

    In a published paper on biodiesel blend quality submitted by the National Renewable Energy Laboratory1, the chief problem found with biodiesel blends was inaccurate blend ratios. Retail customers and fleet managers do not typically worry about whether the blend ratio is correct until a problem occurs. For fleet managers, an incorrect blend can mean a total shutdown of operations. On the ...


    By Spectro Scientific

  • Safe environment using biodiesel blend

    The biodiesel blend is more environmentally friendly, than standard types of fuel which has a crude oil base. It only radiates the carbon dioxide necessary for growth of plants. It doesn’t contain sulfur and other unfriendly contaminates. It has better burning process, because there is more mass of oxygen and it is biological product which quickly decays therefore doesn’t threaten ...


    By GlobeCore Blending

  • International diesel standart, with biodiesel blending

    Rates of use of biological raw materials in a fuel sector are achieved by fast turns. Leading positions in production of bioethanol, absolutely are belonged to Brazil and the USA, development of BioDiesel blend fuel solid grows in the different European Union countries. What is the biofuel? This fuel doesn’t possess a benzol smell and is made from oils as raw materials for which the plants ...


    By GlobeCore GmbH

  • Making biodiesel blends fuel is simple

    Biodiesel is made in the process of transesterification of vegetable oil by methanol, although sometimes ethanol or isopropyl alcohol are used instead. The ration is approximately 200 kg of methanol per 1 ton of oil (plus potassium or sodium hydroxide). Process temperature is approximately 60°С, no pressure increase is required. After the transesterification reaction, the content of ...


    By GlobeCore GmbH

  • International diesel standart, with biodiesel blending

    Rates of use of biological raw materials in a fuel sector are achieved by fast turns. Leading positions in production of bioethanol, absolutely are belonged to Brazil and the USA, development of BioDiesel blend fuel solid grows in the different European Union countries. What is the biofuel? This fuel doesn’t possess a benzol smell and is made from oils as raw ...


    By GlobeCore GmbH

  • Microtox aquatic toxicity of petrodiesel and biodiesel blends: The role of biodiesel's autoxidation products

    The authors investigated the acute Microtox toxicity of the water accommodated fraction (WAF) of six commercial soybean biodiesel/petrodiesel blends at different oil loads. We analyzed five fatty acid methyl esters (FAMEs), C10–C24 n‐alkanes, four aromatics, methanol, and total organic carbon (TOC) content. At high oil loads, the WAFs' toxicity was significantly higher for blends containing ...


    By John Wiley & Sons, Ltd.

  • The Effect of Biodiesel Feedstocks on Infrared Blend Measurements

    This White Paper addresses the common concern among biodiesel blenders and distributors as to whether or not biodiesel made from different feedstocks such as soy, waste vegetable oil or palm oil will affect the blend measurement.  The data presented, as well as the chemistry, shows that infrared measurements offer a reliable analytical technique for checking biodiesel blend. Portable ...


    By Spectro Scientific

  • InfraSpec VFA-IR Spectrometer for Biodiesel Blend Measurements

    Synopsis: Simple, yet powerful, filter-based IR spectrometers are ideal for compliance to the new ASTM 7861 test method for accurately measuring biodiesel blend ratios. The Wilks InfraSpec analyzer was the instrument used to develop and validate this method and thus is the industry standard for field measurement of FAME (Fatty Acid Methyl Ester) blend percentages. ...


    By Spectro Scientific

  • Emissions and performance of a stationary diesel engine run on biodiesel blends

    This paper presents an investigation into the effect of biodiesel blending on emissions and efficiency in a stationary diesel engine. Rapeseed based biodiesel blended in increments of 25% with fossil diesel. The emissions of CO2 show a decrease in emission (g/kWh) with increased engine load. Within the range of tests carried out, the NO ...


    By Inderscience Publishers

  • Performance of a direct diesel engine using aviation fuels blended with biodiesel

    In this study, jet fuel (JF) and railroad fuel (D2) with SME blends (5%, 20%, 50%) were used in a four–cylinder, naturally aspirated, direct (DI) diesel engine. The engine was operated under full load and tested at various speeds to determine the engine's performance and exhaust emission characteristics. The experimental results show that as the SME ratio of the fuels increases, the break ...


    By Inderscience Publishers

  • Emissions reduction with Diesel blending

    Diesel technologies are develops by huge rates. Modification of cars with diesel engines make a half of the new cars sold in Europe. The black smoke, noisy engine operation and unpleasant smell remained far in the past. Today diesel engines present not only profitability, but also high capacity and worthy dynamic characteristics. Quality of fuel also is changed. The modern diesel blending has ...


    By GlobeCore Blending

  • Guide to Measuring Biofuel Blending

    As the global commitment to renewable energy sources grows, the importance of using biodiesel as a blending component with diesel fuel has increased. Biodiesel consists of fatty acid methyl esters (FAME) which are produced by the transesterification of certain feedstock oils, such as soy, rapeseed, canola, and others. The ...


    By Spectro Scientific

  • Maintaining biodiesel quality standards

    A problem that is sometimes encountered with biodiesel blends is inaccurate blend ratios. This article describes a quick analytical method to assess blend ratios and ensure fuel performance. According to a study1 done by the National Renewable Energy Laboratory, the chief problem found with biodiesel blends was inaccurate blend ratios. Retail customers and fleet managers do not typically worry ...


    By Spectro Scientific

  • Emissions Reduction with Diesel Blending

    Diesel technologies are develops by huge rates. Modification of cars with diesel engines make a half of the new cars sold in Europe. The black smoke, noisy engine operation and unpleasant smell remained far in the past. Today diesel engines present not only profitability, but also high capacity and worthy dynamic characteristics. Quality of fuel also is changed. The modern diesel blending has ...


    By GlobeCore Blending

  • Mid-infrared analysis of biodiesel

    The biodiesel industry is growing rapidly. and so is the need for analysis 10 ensure quality product and keep biodiesel in good standing. Biodiesellhat has residual glycerin, glycer· ides, or inorganic salts from the production process can cause problems such as Iilter plugging and injector coking in a diesel engine. The biodiesel blend ralio also can affect cold weather performance, lax ...


    By Spectro Scientific

  • Effects of injection timing on the performance and emissions of a diesel engine fuelled with diethyl ether blended thevetia peruviana biodiesel

    Fast depletion of petroleum reserves and existing emission norms drive us to search for the apt fuel for the IC engines. Biodiesel derived from vegetable oils is being tried now–a–days in most of the researches. A number of researches are in progress to reduce the emissions by using various techniques. In this study, the injection timing of a single cylinder diesel engine is advanced from 23° to ...


    By Inderscience Publishers

  • Selection of best biodiesel blend for IC engines: an integrated approach with FAHP–TOPSIS and FAHP–VIKOR

    The aim of this study is to select the best blend using multi–criteria decision–making (MCDM) technique. The six alternative fuel blends diesel, B20, B40, B60, B80 and B100 are prepared by varying the amount of diesel in biodiesel. Brake thermal efficiency (BTE), exhaust gas temperature (EGT), oxides of nitrogen (NOx), smoke, hydrocarbon (HC), carbon monoxide (CO) and carbon ...


    By Inderscience Publishers

  • Evaluation of environmental impact and gaseous emissions of biodiesel fuels and blends of selected feed-stocks

    Thermal and gaseous emissions of biodiesel feed-stocks: sandbox tree, fluted pumpkin, black date and wild melon whose potentials as biodiesel fuels have been established in the earlier works of Igbum et al. (2012) were evaluated in order to ascertain and establish their environmental and emission impacts on the local and global environment. Effects of blending ratios on the thermal/gaseous ...


    By Inderscience Publishers

  • Putting the brakes on biodiesel

      Come December 31st, the Texas Commission on Environmental Quality (TCEQ) is set to effectively ban biodiesel in the state’s largest markets. The problem, they say, lies with the fuel’s nitrogen oxide (NOx) emissions and their contribution to the formation of ground-level ozone in Texas’ eastern counties. According to the TCEQ, biodiesel does not meet the stricter NOx standards recently ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you