biodiesel centrifuge Articles

  • Making biodiesel blends fuel is simple

    Biodiesel is made in the process of transesterification of vegetable oil by methanol, although sometimes ethanol or isopropyl alcohol are used instead. The ration is approximately 200 kg of methanol per 1 ton of oil (plus potassium or sodium hydroxide). Process temperature is approximately 60°С, no pressure increase is required. After the transesterification reaction, the content of ...


    By GlobeCore GmbH

  • Biodiesel Analysis with Mid Infrared - From Feedstock to Fuel

    Introduction The biofuels industry is growing rapidly and so is the need for analysis to ensure quality product. The parameters for quality biodiesel require different types of instruments and measurement systems, such as gas chromatographs (GC), titrators, centrifuges, infrared spectrometers... Although claims are out there for the analyzer that will do it all, unfortunately there is no one ...


    By Spectro Scientific

  • Sustainability assessment of microalgal biodiesel production processes: an exergetic analysis approach with Aspen Plus

    Biodiesel production growth rate keeps increasing every year with the hope of replacing fossil based liquid fuel which is near exhaustion. Energy efficiency methods coupled with environmental and economic sustainabilities would render biodiesel production attractive. Algal cultivation and oil extraction processes are found to be energy intensive hence exergy destructive. This study presents the ...


    By Inderscience Publishers

  • Restaurant Wastewater Treatment

    Restaurant Wastewater Treatment Grease Trap Wastewater Treatment, Fats, Oils & Grease Easily Removed Wastewater Recycled A grease trap waste hauling operation requested assistance on determining ...


    By Integrated Engineers Inc.

  • Grease Trap Wastewater Case Study

    Restaurant Wastewater Treatment Grease Trap Wastewater Treatment, Fats, Oils & Grease Easily Removed Wastewater Recycled A grease trap waste hauling operation requested assistance on determining ...


    By Integrated Engineers Inc.

  • Fluid mixing is ideal way of multi component production

    Liquids can be mixed manually and a mechanical way. Mixing is necessary at dissolution of hard substances in liquid, at liquid dissolution in liquid, when carrying out many works. The mixing method of liquids in a stream has a set of advantages under a method of periodic mixing, especially, if it passes just before a pouring stage. The combination of high-precision measuring devices, digital ...


    By GlobeCore Blending

  • Two models for tank cleaning

    Fluid treatment specialist Algae- X International, Fort Myers, Fla., has expanded its Mobile Tank Cleaning (MTC) series with two new models. The MTC 500-AFR is an adjustable flow rate system for use with a wide range of tank sizes and fluid types such as diesel, biodiesel and hydraulic fluid. The MTC 1000-LX is the next generation of Algae-X’s MTC 1000 unit, now with stainlesssteel plumbing and ...


    By AXI International

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you