biogas condensate Articles

  • CHP efficiency for biogas

    Combined heat and power plant efficiency is a function of the conversion efficiency of the energy in the fuel gas to useful energy in the form of electricity and heat. A combined heat and power (CHP) plant is typically a reciprocating gas engine that uses the energy in the gas to drive a crank shaft. The crank shaft turns an alternator to ...


    By Clarke Energy

  • Biolimp siloxa for plant for biogas cleaning

    The biogas produced in a digester, landfill or waste water plant is normally treated in order to remove water, H2S, dust and/or CO2. The choice of the cleaning method employed and the compound to be removed depends on the type of end use of the gas. This paper focuses on desing, star up and operation of biogas cleaning plant for removal dangerous component (water, H2S, NH3, siloxane and ...


    By Energy & Waste S.l

  • Treatment of kraft evaporator condensate using a thermophilic submerged anaerobic membrane bioreactor

    The feasibility of using a thermophilic submerged anaerobic membrane bioreactor (SAnMBR) for kraft evaporator condensate treatment was studied at 55±1°C over 6.5 months. Under tested organic loading rate of 1–7 kg COD/m3 day, a soluble COD removal efficiency of 85–97% was obtained. The methane production rate was 0.35±0.1 L methane/g COD and the produced biogas was of excellent fuel quality with ...


    By IWA Publishing

  • Microturbines, Gas Engines Link Biogas to the Grid

    OPPORTUNITIES to produce electricity from methane are being improved continuously as manufacturers introduce new and upgraded equipment to address market needs and varying characteristics of raw biogas. In the renewable energy from organics recycling arena, the two primary types of electricity generation equipment are microturbines and reciprocating gas engines. This article provides a brief ...


    By BioCycle Magazine

  • Case study - ElectraTherm partners with GB Consulting and EnviTec Biogas on first of its kind biogas application

    Biogas/ORC Application on GE Jenbacher 412 Engine Site: Straznice, Czech Rep. Engine Power: 844kWe Green Machine Gross Power Output Avg: 30-40 kWe Thermal Input to the Green Machine: ~500kW Hot Water Input Range: 94°C Hot Water Flow: 12 l/s Liquid Loop Radiator Water Temperature: -7 to 40°C In the Czech Republic, ElectraTherm, distributor GB Consulting and ...


    By ElectraTherm

  • Anaerobic treatability and biogas production potential of selected in-mill streams

    Biochemical methane potential assays (BMP assays) were performed to study the potential of anaerobic treatment of in-mill wastewaters. The assay results indicated that condensate and the BCTMP effluent, which are currently treated with the anaerobic internal circulation reactors, were the best streams for anaerobic treatment because of their relatively high degradability (>80%) and initial rates ...


    By IWA Publishing

  • Case study - Biogas desulphurisation in the WWTP do Norte (Portugal)

    The Northern Wastewater Treatment Plant (WWTP) is one of the biggest in the central region of Portugal, servicing various municipalities. The infrastructure is located in the area of Coimbra, Leiria, taking up 6 hectares of land; it receives effluents from some 250,000 inhabitants across multiple municipalities. It has the capacity to treat around 38,000m3 of wastewater on a daily basis, 77% of ...


    By Bioconservacion SA

  • Case study - Biogas contractor and generator using Geotech’s product

    The plant generates biogas from the waste water of their pig farm; the biogas is used as a means for waste to energy to make the farm self-sustainable Geotech works closely with their distributor within the Thai biogas market, currently their Thai distributor in Bangkok, Entech has delivered over 150 fixed and portable Geotech gas analysers to biogas plants throughout Thailand. The ...


    By Geotech

  • Case study - ElectraTherm green machine installed at biogas plant in Austria

    Biogas/Heat-to-Power Application on a GE Jenbacher 312 Location: Inning, Austria Gross Power Output Range: 18 - 32kWe Thermal Heat Input Range: 260 - 450kWt  Hot Water Input Range:  180°F (82°C) – 200°F (93°C) Hot Water Flow Range: 50 -130 GPM (3.15 – 8.21 l/s) Date Commissioned: Q1 2012 ElectraTherm installed its first Green ...


    By ElectraTherm

  • Green machine generates power from waste heat at biogas facility in the Czech Republic

    Biogas/Heat-to-Power Application on Two MWM Internal Combustion Engines Site: Brno, Czech Rep. Engine Max Power: 980kWe (currently limited to 900 kWe) Green Machine Gross Power Output Avg:  32-39 kWe Thermal Input to the Green Machine: 375-500kWt Hot Water Input Range: 86 - 92°C Hot Water Flow: 35 m3/hour Ambient Temperature: 0-25°C ElectraTherm’s ...


    By ElectraTherm

  • Case study - Green Machine generates power from waste heat at biogas facility in the Czech Republic

    Biogas/Heat-to-Power Application on Two MWM Internal Combustion Engines Site: Brno, Czech Rep. Engine Max Power: 980kWe (currently limited to 900 kWe) Green Machine Gross Power Output Avg:  32-39 kWe Thermal Input to the Green Machine: 375-500kWt Hot Water Input Range: 86 - 92°C Hot Water Flow: 35 m3/hour Ambient Temperature: 0-25°C Date Commissioned: Q2 ...


    By ElectraTherm

  • Renewable resource Trechwitz ORC - Case Study

    This plant has an electrical output of 800 kW and a thermal power of 760 KW. At the biogas plant in Trechwitz, an unconventional heat utilisation model was installed. The waste heat from the CHP unit is used to generate power in an ORC unit (Organic Rankine Cycle). The heat goes into an evaporator, and the operating liquid is converted into pressurised steam. The steam is depressurised by ...

  • Case study - ElectraTherm’s green machine operates in tandem with small steam engine to double power output and increase efficiency

    Niedersachsen, Germany IC Engine: 635kW GE Jenbacher Hot Water Temp:  90°C Hot Water Flow:  10-11 l/s kWth Average (Thermal Input): 550-600kWth Cooling:  Air Cooled Condenser Ambient Temp: 5-30°C Green Machine Average Gross Output: Up to 35kWe, and up to 67kWe combined with Steam Engine ElectraTherm, a leader in small-scale, waste heat-to-power ...


    By ElectraTherm

  • Case study - Heat-to-power application using a Dreyer & Bosse CHP power unit with an internal combustion engine

    Location: Trechwitz, Germany Site Gross Power Output Range 500kWe + 30-35kWe from ElectraTherm ORC Thermal Heat Input Range:  375-450kWt Hot Water Input Range:  90-95°C (118-203°F) Hot Water Flow Range:  39 m3/hour (172 GPM) Ambient Temperature: 0-15°C (32-59°F) ElectraTherm installed a Green Machine in Germany at a biogas power generation ...


    By ElectraTherm

  • Case study - Heat-to-power application using a Dreyer & Bosse CHP power unit with an internal combustion engine

    Location: Trechwitz, Germany Site Gross Power Output Range 500kWe + 30-35kWe from ElectraTherm ORC Thermal Heat Input Range:  375-450kWt Hot Water Input Range:  90-95°C (118-203°F) Hot Water Flow Range:  39 m3/hour (172 GPM) Ambient Temperature: 0-15°C (32-59°F) Date Commissioned: Q2 2012 ElectraTherm installed a Green Machine in Germany at a ...


    By ElectraTherm

  • Organic Rankine Cycle (ORC)

    Biogas/Heat-to-Power Application using a Dreyer & Bosse CHP power unit Location: Trechwitz, Germany Site Gross Power Output Range 500Kwe + 30-35kWe from Electratherm ORC Thermal Heat Input Range: ?375-450kWt   Hot Water Input Range:? 90-95°C ...

  • Hydrolysis of polydimethylsiloxane fluids in controlled aqueous solutions

    Accelerated degradation tests were performed on polydimethylsiloxane (PDMS) fluids in aqueous solutions and in extreme chemical conditions (pH 2–4 and 9–12). Results confirmed that silicones can be degraded by hydrolysis. Higher degradation levels were achieved in very acidic and alkaline conditions. Degradation products are probably polar siloxanols. In alkaline conditions, the ...


    By IWA Publishing

  • Combined cycles for CO2-capture with high efficiency

    The presented paper gives an overview on combined cycles for CO2-capture with high efficiency focussed on processes using a Solid Oxide Fuel Cell (SOFC), because of the air separating ability of the SOFC-membrane. The SOFC-membrane is only permeable for oxygen ions, so the cathode exhaust gas is oxygen depleted air, which should be discharged to the atmosphere after recycling or using the heat ...


    By Inderscience Publishers

  • Largest Hofstetter Installation

    Type     HOFGAS®- LPM 7000  Commissioning     2003 Site     Landfill Pinto (ES) SituationOne of the Europe’s largest landfill sites is located in the Pinto region, south of Madrid, where a modern waste treatment and energy recovery system is currently being developed. Urbaser S. A. is implementing a new plant ...


    By Hofstetter BV

  • Case study - Tapioca farming in Thailand

    The group has five factories located throughout Thailand; on a typical day, they produce 2,800 tons of tapioca between them.  The crop is processed within 24 hours with their state of the art production process and turned into tapioca starch or fibre for use in the paper industry, plywood, textiles, glue and the food and beverage industry. The process of crop cleaning produces a substantial ...


    By Geotech

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you