biomass combustion process Articles

  • The Beltran biomass cogeneration system

    An effective, economical solution for harvesting safe, renewable domestic energy, mitigating wastes and achieving environmental goals. Background The Beltran Biomass Cogeneration System (BBCS) is an integrated, three-stage process that uses proprietary gasification technology to convert biomass and other organic wastes into versatile, cleanburning synthesis gas. The purified ...


    By Beltran Technologies, Inc.

  • Emissions and performance from a biomass boiler for different solid biomass fuels

    During biomass combustion, a number of physical and chemical processes occur in time and space during the combustion. The processes include: drying and preheating of the fuel, pyrolytic release of volatile matter, glowing combustion char, etc. In general the combustion of biomass produces, next to energy, ash, carbon dioxide and monoxide, unburnt hydrocarbons, oxides of nitrogen, particulate ...


    By Inderscience Publishers

  • Woody Biomass as renewable energy source

    In-depth analysis in Minnesota assesses the feasibility and cost-effectiveness of regional biomass generated electricity projects that tap into local feedstocks. The Center for Energy and Environment (CEE) in Minneapolis, Minnesota undertook a multiphase research project to create a framework that communities and legislators can use to determine the feasibility of biomass-generated electricity in ...


    By BioCycle Magazine

  • Making Biomass Pellets from Grass

    Grass is familiar to everyone, which is distributed all over the world, such as farmland, residential green belt and square lawn, and you can see it everywhere and anytime in a year. Generally, it is used as feed for livestock and poultry, but now it can be a treasure with the way it present changed. That is biomass pellets. The Benefits of Grass Pellets ...


  • Commercialisation options for biomass energy technologies in ESCAP countries

    Biomass provides the basic energy requirements for cooking and heating in rural households and for processes in a variety of traditional industries in developing countries. In general, biomass energy uses in such cases are characterised by low efficiency. Potentially, efficiency improvements of existing energy systems could increase the energy supply from biomass substantially. Also, wide ranges ...


    By Inderscience Publishers

  • Biomass fired thermal oil heater case study

    This 12 MWth output Biomass Power Plant is one of the turnkey products of Biomass Power. The plant was fully commissioned in December 2006. The system has a capacity of 12 MW thermal output producing up to 10MWth of 300°C 10 Barg pressure hot oil, up to 10 tonnes per hour of steam and 2 MWth of 200°C hot air. This is all achieved from one grate heating three separate heat exchanges. The ...


    By Biomass Power Limited (BPL)

  • Walki biomass cover: easy cover-up improves drying process and energy content of energy wood

    Logging residue is an inexpensive and easily accessible source of biofuel, but to improve the energy content it must first dry on the ground and after that it can be stored in piles for several months. To shelter the piles from moisture through rain, snow and ice, Walki has developed a paper-based, waterproof cover that can be chipped and burned together with the residue. The importance of ...


    By Walki Group Oy

  • Small-scale electricity production from biomass

    NC Service has set up the first plant of this type in Spain Thanks to the BIOCOM Project, Nicolás Correa Service, S.A. has built the first biomass combustion plant that not only produces thermal energy, but also electricity on a small scale (130 gross kWe). The process is based on the combustion of woodchips in a furnace to produce heat that is then transferred to an ORC module, where it ...

  • TAIM WESER, at the forefront in biomass cogeneration solutions

    The state-of-the-art biomass gasification plant, developed by TAIM WESER utilizing proprietary technology, is now up and running successfully, joining the range of technological products offered by the company. This solution offers clients high energy efficiency, streamlined processes and a design that, owing to its compact dimensions, allows the equipment to be installed at the location where ...


    By Taim Weser S.A.

  • Mawera inside story – biomass case study

    With more than 30 years’ experience in the UK market, Mawera UK has supplied and installed wood burning boilers to numerous companies, turning wood-waste into heat for factory, office and process heating and helping companies recover the cost of their boilers through compliance with the RHI. To support progress and innovation, Mawera maintains its own levels of technology and combustion ...


    By Mawera (UK) Ltd

  • Feasibility analysis for biomass in cities, counties and facilities

    The commercial waste industry includes all those who collect waste from the simplest “collect waste and transport to a landfill” to the more complex “collect waste and process into re-usable components and energy.” This article will cover how we can collect material and fuel a clean energy system for our immediate future, while saving clean water and air. ...


    By Waste Advantage Magazine

  • 2 MWe Biomass Power Plant Case Study

    This 2 MWe Biomass Power Plant is one of the turnkey products of Biomass Power. The plant was fully commissioned in September 2007. The plant has a capacity of 11 MW thermal and rated at 2MWe producing 15,700 MWh of green electricity per year, 100% of which is exported to the grid. The fuels used are from forestry and agricultural residues, wet woodchips, compost oversize, straw and miscanthus, ...


    By Biomass Power Limited (BPL)

  • How to Turn Waste Paper into Biomass Pellets

    How to Turn Waste Paper into Biomass Pellets Along with the development of human civilization, the number of waste paper has a gradually increase trend every year. It is seen everywhere. Many ways have been researched to recycle the waste paper, while the waste paper has been polluted and there are many toxic substances contained, so it is not good for ...


  • The recent development of biomass energy in India: an overview

    This paper presents the current status and use of Biomass Technologies (BTs) in India. Different technology routes such as gasification, combustion and cogeneration are being actively developed to promote conversion of biomass materials such as agricultural, forestry and agro-industrial residues into electric power. The promotion of scientifically designed models of wood/biomass fired efficient ...


    By Inderscience Publishers

  • Case study - Decorpanel opts for Mawera biomass solution

    With six Homag beam saws, CNC drilling machines, CNC routing machines and edgebanders producing around 20 tonnes in off-cuts every week, Decorpanel of Hetton-le-Hole needed a boiler that would enable the company to utilise its waste fully and provide heating for the whole site. With the existing system out of action and a factory that was heated with gas and electric, Decorpanel’s Ian Ling ...


    By Mawera (UK) Ltd

  • NUMERICAL SIMULATION OF THE BURNING CHARACTERISTICS OF THERMALLY-THICK BIOMASS FUELS IN PACKED-BEDS

    Biomass fuels are being increasingly used for domestic heating and power generation to cut down the net CO2 emission to the atmosphere. In most cases, those fuels are thermally-thick under packed-bed combustion conditions. In this paper, a doublemesh numerical scheme is proposed and implemented to simulate the detailed combustion processes for a biomass fuel with sizes ranging from 5 mm to 50 mm. ...

  • Case study - Green Machine uses biomass to put power back on the grid

    St. Helena Island, South Carolina Gross Power Output: up to 43kWe Thermal Heat Input: 200 - 500kWt Hot Water Input Range: 160 - 235°F Hot Water Flow: 150 GPM     Cold Water Input: 68°F Cold Water Flow: 150 GPM In fall 2010, American Capital Resources Company installed ElectraTherm’s heat-to-power Green Machine, for generating power from ...


    By ElectraTherm

  • Case study - Heat-to-power application using a Dreyer & Bosse CHP power unit with an internal combustion engine

    Location: Trechwitz, Germany Site Gross Power Output Range 500kWe + 30-35kWe from ElectraTherm ORC Thermal Heat Input Range:  375-450kWt Hot Water Input Range:  90-95°C (118-203°F) Hot Water Flow Range:  39 m3/hour (172 GPM) Ambient Temperature: 0-15°C (32-59°F) Date Commissioned: Q2 2012 ElectraTherm installed a Green Machine in Germany at a ...


    By ElectraTherm

  • Case study - Heat-to-power application using a Dreyer & Bosse CHP power unit with an internal combustion engine

    Location: Trechwitz, Germany Site Gross Power Output Range 500kWe + 30-35kWe from ElectraTherm ORC Thermal Heat Input Range:  375-450kWt Hot Water Input Range:  90-95°C (118-203°F) Hot Water Flow Range:  39 m3/hour (172 GPM) Ambient Temperature: 0-15°C (32-59°F) ElectraTherm installed a Green Machine in Germany at a biogas power generation ...


    By ElectraTherm

  • Advanced Application of Product Gases of Thermal Conversion of Biomass and Waste; Integration With the Fischer-Tropsch Synthesis

    The Netherlands Energy Research Foundation (ECN) is studying the advanced application of product gases from the thermal conversion of biomass and waste (B&W). The Fischer-Tropsch (FT) synthesis is the most promising as it affords diesel-like fuels of high quality and free from sulfur and aromatics. A slurry bubble FT reactor with an iron catalyst is the most suitable for B&W syngases. To optimize ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you