biomass incineration plant Articles

  • Biomass gassing as an effective source of energy

    Type     HOFGAS®- IFM4c 4000/2100 Performance     2100 Nm3/h / 3500 kW          Location     Limoges (FR) Situation A prestigious gassing plant for biomass is being built in the heart of France. The owner is promising himself a significantly higher level of efficiency through ...


    By Hofstetter BV

  • Biomass fired thermal oil heater case study

    This 12 MWth output Biomass Power Plant is one of the turnkey products of Biomass Power. The plant was fully commissioned in December 2006. The system has a capacity of 12 MW thermal output producing up to 10MWth of 300°C 10 Barg pressure hot oil, up to 10 tonnes per hour of steam and 2 MWth of 200°C hot air. This is all achieved from one grate heating three separate heat exchanges. The ...


    By Biomass Power Limited (BPL)

  • Biomass is Carbon Neutral – What Does This Mean for Sustainability?

    The topic of climate change is not without its fair share of controversy, and while there are dozens of conflicting scientific and political perspectives at play, one positive that has emerged from the chaos is that the average global citizen is far more aware of the importance of sustainability and environmental responsibility than perhaps ever before. This has trickled into the realm of ...


    By Uzelac Industries, Inc

  • 6th edition: Biomass-to-Power 2015/2016

    This study is the world’s largest of its kind. It is the standard work of the industry for electricity generation from solid biomass. The 6th updated edition includes: Specific data on around 4,200 units in nearly 2,900 biomass power plants and over 320 biomass co-incinerators worldwide. The biomass power plants have an electricity generation capacity of over 47 GWel. The ...


    By ecoprog GmbH

  • Generating biomass fuel from disaster debris

    Natural disasters create massive amounts of vegetative debris, the majority of which is landfilled or open burned. These environmentally harmful practices are the norm partly out of necessity and convenience, with a focus on clearing material as quickly as possible after a disaster - versus finding outlets for the material including mulch, compost and biomass fuel. The biomass fuel market in ...


    By BioCycle Magazine

  • 4.5 MWe Refuse Derived Fuel to Energy Plant Case Study

    This 4.5 MWe Biomass Power Plant is one of the turnkey products of Biomass Power. The plant has a capacity of 24 MW thermal and rated at 4.5 MWe producing 35,476MWh of green electricity per year, 100% of which is exported to the grid. The fuel used is segregated biomass from a commercial and industrial waste collection business. The fuel is produced by removing some of the recyclable material ...


    By Biomass Power Limited (BPL)

  • Study Charts a Future for Waste-Derived Fuels

    Pointers to possible future EU policy initiatives to give co-incineration facilities burning waste-derived fuels a strategic role in waste management have emerged in a study for the European Commission.1 The report suggests a policy focus on promoting source separation of municipal wastes, active discouragement of mass burn incinerators, and a levelling of the regulatory playing-field for ...

  • AVA – The expert for ash and dust conditioning - case study

    For an environment free of dust Application Ashes and dust from the filters of incineration, de-dusting and drying plants are lyed, moistened or solidified. The result is a disposable final product, a transportable property or re-usable value products e.g.: Dust from power plants for the use in road construction and building material industry ...


    By AVA - Huep GmbH u. Co. KG

  • Refuse Derived Fuel, Current Practice and Perspectives

    Untitled Document Summary I OBJECTIVES The objectives of the project were to undertake a survey on the current ...

  • Trials about composting of solid wastes from palm oil Mills in Indonesia

    The solid wastes produced in palm oil mills are empty fruit bunch (EFB), mesocarp fibre, shell, and palm kernel cake. On an average the amount of EFB is 0,220 t of 1 t oil palm fruit bunch (Singh, 1994). In Indonesia, there will be about 2.9 million tonnes EFB (dry basis) in 2000 (Lubis et. al. 1994). At the moment, EFB in Indonesian palm oil mills are burnt in incinerators to reduce the mass and ...


    By ORBIT e.V.

  • Reducing the Economic Friction of Regulation

    Last month, we looked at two distinctly different bioenergy business models that are merging. Energy profit centers and waste cost-recovery facilities are learning the benefits of each other's business model. The resulting projects generate maximum revenue with lower production costs. The same kind of business model duality occurs in biomass energy regulation. There are more than two kinds of ...


    By BioCycle Magazine

  • Mechanical Biological Treatment (MBT): The new kid on the UK waste management block

    Waste management in the United Kingdom (UK) has undergone a revolution in the past 20 years. In 1990, the UK landfilled more than 90 percent of its municipal solid waste (MSW), incinerated about 8 percent and recycled the remaining 2 percent. It had one the highest landfill rates in Western Europe and one of the lowest recycling rates, reflecting the UK’s mining traditions and aggregates ...


    By Waste Advantage Magazine

  • Thermal recycling of spent grains – residue becomes resources

    Introduction – the History of Beer The origin of beer was a happy coincidence: In the fourth millennium BC, the Sumarians discovered the fermentation process. The country of the Sumarians, called Mesopotamia, was located between the Euphrates and the Tigris. The Sumarians wanted to help an ill person swallow some bread, so and they soaked a piece in water. They simply forgot the bread in ...


    By Flottweg SE

  • Advanced, integrated systems meet the challenges of commercial-scale operation

    Technological frontiers in die alternative energy industry continue to widen in countries around the globe. As such, die exploitation of biomass as a source of energy has become die fastest-growing sector among a growing roster of energy solutions. Today, more energy is produced from various forms of biomass dian from all wind, solar and geodicrmal applications combined. Much of die excitement ...


    By Beltran Technologies, Inc.

  • FTIR becomes best option for multi-gas emissions

    Globally, the number of industrial processes and emissions being monitored with Gasmet’s FTIR multi-gas technology has increased enormously in recent years as process managers exploit the benefits of being able to monitor a wide range of gases simultaneously and with minimal maintenance and calibration requirements. Gasmet CEMS (continuous emissions monitoring systems) are used for ...


    By Gasmet Technologies Oy

  • Biochar: forgotten agricultural nostrum

    What is biochar?  The new multifunctional products are in good request nowadays. One of such innovations is Biochar. This type of charcoal is manufactured using the low-temperature continuous pyrolysis equipment. The raw material for the recycling process is biomass (agricultural and other biological waste). Biochar origins (Terra ...


    By Polvax-Ukraine

  • Municipal Solid Waste – Key to a Low Carbon Economy

    A newly released report has found the waste sector has a key role to play in the development of a low carbon economy and the reduction of greenhouse gases (GHGs). This report comes in advance of the UN Climate Conference in Paris, which will take place in December. The report was ...


    By Zero Waste Europe

  • Government to invest GBP£70m in green facilities

    The Mayor of London has announced the government's intentions to invest GBP£70 million in the development of low-carbon waste and recycling facilities in the capital. This could potentially create hundreds of jobs in engineering and construction, as several biomass, incineration sites and recycling centres for food and plants will be built; saving the capital millions of pounds, according ...

  • CEMS: An Overview

    We've written an overview to where CEMS are required, types of site that require CEMS and future requirements. Continuous Emissions Monitoring Systems are used to continuously collect, record and report data from industrial process operators that produce emissions to air. CEMS are used as a means to comply with ...


    By a1-cbiss

  • Final CISWI rule

    On March 21, 2011, in parallel with publication of the Boiler National Emission Standard for Hazardous Air Pollutants (NESHAP) rules and the Non-Hazardous Secondary Material (NHSM) rule, EPA promulgated the final updates to the New Source Performance Standards (NSPS) and Emission Guidelines (EG) for Existing CISWI Units, collectively referred to as the “2011 CISWI Rules.”1 The 2011 ...


    By Trinity Consultants

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you