biomass pelletizing Articles

  • Making Biomass Pellets from Grass

    Grass is familiar to everyone, which is distributed all over the world, such as farmland, residential green belt and square lawn, and you can see it everywhere and anytime in a year. Generally, it is used as feed for livestock and poultry, but now it can be a treasure with the way it present changed. That is biomass pellets. The Benefits of Grass Pellets ...


  • Anaerobic Digestion Reduces Microplastics in Sludge

    Anaerobic digestion can help remove microplastics — a large cause of water pollution — during the sewage treatment process Microplastics, or tiny fragments of plastic, include microbeads, the plastic pellets present in thousands of household and personal care products, including toothpaste, cosmetics, and beauty scrubs. They also include fragments from the breakdown of anything in our ...


    By Fluence Corporation

  • How to Turn Waste Paper into Biomass Pellets

    How to Turn Waste Paper into Biomass Pellets Along with the development of human civilization, the number of waste paper has a gradually increase trend every year. It is seen everywhere. Many ways have been researched to recycle the waste paper, while the waste paper has been polluted and there are many toxic substances contained, so it is not good for ...


  • The biocarbon pellet

    Referring to the “notorious graph of increasing carbon dioxide levels in the atmosphere,” Gerry Kutney said the “bioenergy field for the pulp and paper industry has been important for decades, but the general population has only shown interest recently.” Kutney demonstrated the key role vegetation plays in the carbon cycle, with a graph showing the annual fluctuation of the total level in the ...

  • The Role of Lignin in Pelleting Process

    When the crushed raw materials are feed into the pellet mill, they will be pelletized after being processed by rollers and die. You may wonder how the powdered materials could be formed into compact and glossy pellets. The magic lies in a kind of natural element named lignin. 1. The Introduction of ...


  • US market and pellet trends

    Marth Companies refines biomass materials into pellets. Tony Morice tracked trends in energy consumption by end-use sector from 1949–2006. Biomass has played a relatively minimal role until recently; however, this could change given the “drastic” increases in liquid fuel prices in the last 12 months. Since 2005, pellet production has increased in six Midwestern states by 700%. Unfortunately, ...

  • The Benefit of Pellet Mill Investment

    The Benefit of Pellet Mill Investment The pellet mill business has been existed for many years and it is profitable to the owners of pellet mills as well. Pellet mill plants have been advocated in many countries, and it is widely recognized that the achievements have a relationship with current environmental and energy production concerns. Pellet mills offer a lot of ...


    By Allance Pellet Machinery

  • Modeling the effect of extrusion parameters on density of biomass pellet using artificial neural network

    Abstract Background The relationships between the density of the biomass pellet and the related variables are very complicated and highly nonlinear, which make developing a single, general, and accurate mathematical model almost impossible. One of the most appropriate methods to solve these problems is the intelligent method. Shankar and Bandyopadhyay and Shankar et al. successfully used genetic ...

  • Case study -Pellet production plant – PEP Group – North Energetic Biomass, Poland

    Introduction of Polish Energy Partners S.A. Another worth mentioning success of DORAN owner, Mr Andrzej Rogulski, is successful realization of project related to construction of three pellet production factories for Polish Energy Partners S.A. These tasks were performed as a part of Andrzej Rogulski’s function as the Director of biomass fuels production in PEP Group. ...


    By DORAN GROUP

  • Case study - Pellet production plant – PEP Group – South Energetic Biomass, Poland

    Introduction of Polish Energy Partners S.A. Another worth mentioning success of DORAN owner, Mr Andrzej Rogulski, is successful realization of project related to construction of three pellet production factories for Polish Energy Partners S.A. These tasks were performed as a part of Andrzej Rogulski’s function as the Director of biomass fuels production in PEP Group. ...


    By DORAN GROUP

  • Flexibility with biomass size reduction

    With increased global demand for biomass as a renewable energy source, engaging in profi table and effi cient biomass handling has become priority No. 1 for processing plants worldwide. The equipment used to carry out the strict production requirements of chipping, grinding, shredding and conveying the wood chips is vital to the design and tonnage estimations of engineers. Choosing the right ...


    By TerraSource Global

  • Case study - Pellet production plant – PEP Group – East Energetic Biomass, Poland

    Introduction ofPolish Energy Partners S.A. Another worth mentioning success of DORAN owner, Mr Andrzej Rogulski, is successful realization of project related to construction of three pellet production factories for Polish Energy Partners S.A. These tasks were performed as a part of Andrzej Rogulski’s function as the Director of biomass fuels production in PEP Group. ...


    By DORAN GROUP

  • Pellet Mill Report: A Complete Guide for Pellets Industry Beginners and Pellet Mill Buyers

    What is a pellet mill? The definition A pellet mill (also called pellet machine, pellet press) is a type of mill or machine which is used to make pellets from powdered materials. A pellet mill is usually consisted of pellet die and rollers. The rotating rollers or the rotating dies force the feedstock trough the die holes to form pellets. (See the picture of how the ...


    By Gemco Energy

  • Biomass is Carbon Neutral – What Does This Mean for Sustainability?

    The topic of climate change is not without its fair share of controversy, and while there are dozens of conflicting scientific and political perspectives at play, one positive that has emerged from the chaos is that the average global citizen is far more aware of the importance of sustainability and environmental responsibility than perhaps ever before. This has trickled into the realm of ...


    By Uzelac Industries, Inc

  • Hurricane Cyclones To Reduce Emissions Of Dryer Cyclones In Glowood Pellet Plant (71,839 m3/h at 87ºC) - Case Study

    Foreword ACS designed and supplied a Hurricane Cyclone System to reduce PM emissions of existing dryer cyclones at Glowood Pellet Plant. The plant occupies a total area of 3.8 hectares and a total investment amounting to 10 M€. Production (100.000 ton/y) is 100% for export, as Portugal consumes under 10% of what it manufactures on a global basis (approximately 1M ton/y in 2012). A ...

  • ACS installation at Glowood 100,000ton/y pellet plant achieves 12mg/Nm3 - Case Study

    With increasingly tougher restrictions on industrial air emissions, pellet manufacturers are looking to "future-proof" particulate matter (PM) compliance, cost effectively. One Portuguese producer, Glowood Indústria S.A., has recently installed a brand new type of mechanical cyclone. The most recent results show a remarkable reduction of its PM emissions, from 700mg/Nm3 to under ...

  • Safe and Simple Excavation Application Provides Long-Term Treatment, UK

    In Situ Treatment of Residual TPH Contamination Following Tank Removal Remediation Details Site Type: Petrol Filling Station Project Driver: Site Redevelopment Remediation Approach: Enhanced Aerobic Biodegradation, Excavation application Technologies: ORC-Advanced* Pellets Summary ...


    By REGENESIS

  • Isolation of Extra Cellular Biopolymer Producing Microorganisms from Wastewater Sludge for Sludge Settling and Dewatering

    Sludge settling and dewatering are carried out by employing cationic synthetic polymer (CSP) in municipal and industrial wastewater treatment plant. CSP are expensive and further pollute the environment, hence to address these problems bioflocculation of sludge was examined in this study. Microorganisms were isolated from municipal and industrial wastewater sludges and six extracellular polymeric ...

  • Modelling of sediment nutrient fluxes for a pulsed organic load

    A sediment model has been developed to simulate the Sediment Oxygen Demand (SOD) and sediment nutrient fluxes after a sudden input of Particulate Organic Matter (POM). Compared with previous sediment models, the main advances are the use of a continuous function to represent the kinetics of POM diagenesis and inclusion of the biomass content in POM diagenesis. Laboratory experiments were also ...


    By Inderscience Publishers

  • Rapid start-up and efficient long-term nitritation of low strength ammonium wastewater with a sequencing batch reactor containing immobilized cells

    Major concerns about nitritation of low-strength ammonium wastewaters include low ammonium loading rates (ALRs) (usually below 0.2 kg/m3-d) and uncertainty with the long-term stability of the process. The purpose of this study was to test a sequencing batch reactor filled with cell-immobilized polyethylene glycol (PEG) pellets (∼2 mm in size) to see if it could achieve efficient and ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you