bioreactor smbr Articles
-
Numerical simulation of filtration performance in submerged membrane bioreactors: effect of particle packed structure
It is widely known that the accumulation of solid matter forming a cake layer on the membrane surface is one of the major limitations of the filtration performance in submerged membrane bioreactors (SMBR). This study is focused on the influence of the cake porosity of different particle microscopic packed structures on the filtration performance of hollow fiber systems. An integrated model ...
-
Evaluation of the importance of various operating and sludge property parameters to the fouling of membrane bioreactors
A single-fibre microfiltration system was employed to investigate the importance of various operating and sludge property parameters to the membrane fouling during sludge filtration. The sludge was obtained from a submerged membrane bioreactor (SMBR). A series of comparative and correlative filtration and fouling tests were conducted on the influence of the operating variables, sludge properties ...
-
Estimated costs of implementation of membrane processes for on-site greywater recycling
Greywater reuse inside buildings is a possible way to preserve water resources and face up to water scarcity. This study is focused on a technical-economic analysis of greywater treatment by a direct nanofiltration (NF) process or by a submerged membrane bioreactor (SMBR) for on-site recycling. The aim of this paper is to analyse the cost of recycled water for two different configurations (50 and ...
-
The investigation of paper mill industry wastewater treatment and activated sludge properties in a submerged membrane bioreactor
The paper mill industry produces high amounts of wastewater and, for this reason, stringent discharge limits are applied for sustainable reclamation and reuse of paper mill industry wastewater in many countries. Submerged membrane bioreactor (sMBR) systems can create new opportunities to eliminate dissolved substances present in paper mill wastewater including. In this study, a sMBR was ...
-
Calculation methods to perform mass balance of endocrine disrupting compounds in a submerged membrane bioreactor: fate and distribution of estrogens during the biological treatment
The purpose of this paper is to report the study of the fate and distribution of three endocrine disrupting compounds (estrogens); Estrone (E1), 17β-estradiol (E2), and 17α-ethinylestradiol (EE2) in a laboratory scale submerged membrane bioreactor (SMBR). For this matter, both aqueous and solids phases were analyzed for the presence of E1, E2 and EE2. The outcome of this study was that three ...
-
Effect of membrane characteristics on the performance of membrane bioreactors for oily wastewater treatment
Influence of membrane material and pore size on the performance of a submerged membrane bioreactor (sMBR) for oily wastewater treatment was investigated. The sMBR had a working volume of about 19 L with flat sheet modules at the same hydrodynamic conditions. Five types of micro- and ultra-polymeric membranes containing cellulose acetate (CA), cellulose nitrate (CN), polyamide (PA), polyvinylidene ...
-
Influences of electroosmosis and electrophoresis on permeate flux and membrane fouling in submerged membrane bioreactors (SMBRs)
The objective of this study was to investigate the influences of electroosmosis (EO) and electrophoresis (EP) on the permeate flux in submerged membrane bioreactors. When a polymeric membrane is placed in between an anode and a cathode, both EO and EP occur simultaneously, causing enhancement in flux. Results showed that after 150 min of filtration, the permeate fluxes were 60, 115, 175 and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you