blast monitoring Articles

  • Blast wave characteristics and its influence with distance of measurement

    Extraction of locked-up coal pillars by opencast method and the presence of dwellings in proximity to excavation area lead to specialised drilling and blasting plan for safety of structures and humans. Introduction of improper bench layout, mismatched drilling equipment and blast geometry enhances discomfort for local inhabitants. Blast-induced vibration magnitude also shows poor attenuation rate ...


    By Inderscience Publishers

  • Question of the Month: How can you utilize dry ice blasting for delicate cleaning?

    Already recognized as being a non-abrasive cleaning process, dry ice cleaning is gaining notoriety for its delicate cleaning properties. It is commonly used in the pharmaceutical industry for cleaning surgical devices and catheter tips. Dry ice blasting is also a popular tool for cleaning electrical components in any industry. When cleaning with dry ice for delicate applications it’s ...


    By IceTech A/S

  • X-ray slag monitoring

    According to market research published by the Freedonia Group in June 2006, global demand for cement is forecast to ‘grow to 4.7 per cent yearly through 2010’. While demand for Portland cement, which currently accounts for three-quarters of all cement sales worldwide, will be healthy, sales of blended cements are expected to climb at a faster pace. Similarly, the Slag Cement Association reports a ...


    By PANalytical

  • Lead and Zinc Smelting Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • GM-Delphi: Whirl / Wet Combines High Efficiency Wet Dust Collection with Low Maintenance and Operating Costs

    Tri-Mer® dust collection technology has once again been selected by GM-Delphi. Four units were selected as replacements for dry collectors. Each unit serves four grinding (or shot blasting) stations. Capacities range from 425 to 52,500 cubic ft./minute. The units will accommodate very heavy loadings under continuous use, and allow regular maintenance without interrupting production. Equally ...


    By Tri-Mer Corporation

  • Iron and Steel Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Digital Asset Management facilitates compliance to NATA case study

    Customer Typical mining company in Australia Application Operations, Calibrations, Maintenance &  ...


    By Ecotech Pty Ltd

  • Pumps for new housing in Stockholm

    Grindex new series of dewatering pumps are designed to last three times longer in abrasive applications compared to previous pump generations. In this case study from Sweden, they are up for a tough test. One of the critical factors for the building of 3,000 new homes within a few years are the seven submersible dewatering pumps from Grindex installed deep in the bedrock below south Stockholm. ...


    By Grindex Pumps

  • Mini Steel Mills Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Replacement of Hot Caustic Paint Stripping Process with High Pressure Water Jet System: Ford Australia

    Ford Australia Ltd replaced an existing hot caustic paint stripping process, used for cleaning car skids, with a high pressure water jet system. This project has resulted in annual savings in the order of $300,000 from reduced chemical, energy and waste disposal costs. Significant improvements in paint quality were also achieved through the ability to clean the skids on a more regular basis than ...


  • Nickel Smelting and Refining Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • The Gasmet story from an academic idea to a global business

    In this article, Dr Petri Jaakkola, founder and Chairman of Gasmet Technologies Oy explains how an idea shared by a group of researchers at the University of Oulu in Finland, during the early 1970s, developed into one of the world’s leading gas monitoring instrumentation manufacturers. Early history – technology development At first, the Finnish researchers understood ...


    By Gasmet Technologies Oy

  • High Tech Research Centre - Case Study

    The UK’s new High Temperature Research Centre (HTRC) has been designed to provide the UK with world-leading R&D capabilities in investment casting – and to tackle the dust extraction and fume extraction challenges these processes involve, both today and in the future, Western Air Ducts has designed and installed a complete, intelligent LEV system. The showcase £60m ...


    By Inteliair Ltd

  • Are VRcades the Next Big Opportunity?

    There is mounting evidence that VR is not necessarily an isolating experience, but one which can and will become very social. Virtual Reality Arcades or VRcades may indeed be one of the next big ideas that drives VR into the mainstream. Clearly, the availability of reasonably-priced VR headsets from Sony, HTC, Oculus – together with smartphone-based devices, are creating a feeding frenzy ...


  • Proposed boiler MACT sets aggressive emission limits

    On June 4, 2010, U.S. EPA proposed National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions.  EPA proposed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater ...


    By Trinity Consultants

  • Foundries Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Coke Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Typical Sensor Location Considerations

    The sensor mounting location within a space may be dependent on many variables. There are no specific formulas since each application will have it’s own determining factors and priorities. These include, but are not limited to: source of gas: Is the source a combustion exhaust from a vehicle or furnace or a vapour from a tank spill, pipe leak, or faulty valve? density of ...


    By Arjay Engineering Ltd.

  • Offshore oil spill clean up case study

    In the event of a major incident occurring offshore, for example a tanker casualty running aground or breaking up for any reason, it is of paramount importance to deploy emergency response to protect and save human life. Once this has been done an assessment of the casualty should be made on whether it is possible to salvage the vessel and its contents and to assess the type and amount of oil ...

  • OSHA announces proposed silica rule, lowering PEL, ending lengthy OMB review

    Federal efforts to protect workers from silica exposure entered a new phase Aug. 23 when the Occupational Safety and Health Administration finally announced its proposal for regulating silica dust. OSHA's proposed rule would set a permissible exposure limit (PEL) of 50 micrograms of respirable crystalline silica per cubic meter of air. The ...


    By Bloomberg BNA

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you