bod bottle Articles

  • Measuring Short-Term BOD

    Measurement of oxygen uptake rates in activated sludge processes is essential to their satisfactory operation. Traditionally, oxygen uptake rates (OUR) have been determined by using a dissolved oxygen probe to measure the change in dissolved oxygen in a BOD bottle. While this method is rapid, it provides only a snapshot, at a single point in time, of the oxygen uptake rate reaction in a treatment ...


    By Challenge Technology

  • Water reuse for the bottled water industry

    ABSTRACTThe bottled water industry uses a machine specifically designed for the washing of its containers (19-L capacity) and generates 6-L wastewater/container. This effluent can be used for watering of green areas and car washing. The objectives of the present work were to characterize the effluent and to propose a specific treatment to enable reuse of the effluent from the container washing ...


    By IWA Publishing

  • Coca-Cola Refreshments Bottling Company Needham Heights, MA case study

    The Problem: The Coca-Cola Bottling Company was operating an MBR system that was not performing to maintain the flow rate required for effluent discharge. The Membrane System had rapid flux decline and the tubular membranes were being replaced every 6 months. The Solution: BioprocessH2O supplied a bioFLOW MBR System sized and designed to reduce BOD using a bioFLOW ...


    By BioprocessH2O

  • Biologically Engineered Biofilm Modifications for the Enhancement of Collection System Transformations and Impacts on BNR Wastewater Treatment

    ABSTRACTIncreased influent RBCOD and heterotrophic plate counts coincided with the start of bioaugmentation in this study. Observed influent sulfide levels were also lower duringbioaugmentation. RBCOD increases could potentially improve biological phosphorus or nitrogen removal. Lowered sulfides in the influent could lower corrosion and odors in the collection system ...

  • Breweries Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum emissions levels that are ...


    By The World Bank

  • CH#830 - Bioaugmentation Improves Performance of Brewery Waste Treatment Plant

    Introduction This packaging plant finishes 'heavy' beer, a liquid concentrate, into the well-known canned and bottled products. The plant handles 50,000 barrels per week and generates over 350,000 gallons of wastewater per day. Wastes are treated at the plant's 0.5 MGD waste treatment facility which operates under a standard discharge NPDES permit. Waste beer is the main constituent of ...


    By BIO-SYSTEMS International

  • Treatment plant protected by effluent monitor at major drinks factory

    The installation of a BioTector continuous TOC (Total Organic Carbon) monitor to police the front end of Cobevco’s wastewater treatment plant has enabled tight control of the treatment process. Delivering results 20 times faster than laboratory techniques, the monitor at the Elton facility in Cheshire provides advance notice of organic overload so that the plant is able to instantly divert ...


  • Dairy Industry Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Recovery and Reuse of Filter Backwash Water: Coca-Cola Amatil

     Background The Coca Cola Amatil (CCA) Northmead plant in Sydney was established in 1972 and manufactures a wide range of world recognised Coca-Cola trademark soft drink products, such as Sprite, Fanta, Lift and Coca-Cola. The Northmead plant has one aluminium can line and two plastic PET bottle lines. It produced over 250 million litres of soft drink in 1995. ...


  • Case study: Food & beverage industry

    OverviewGranador, a premium brand of Unidrink AG, is a well known beverage producer, located in Hitzkirch, Switzerland. Granador produces about 45 million bottles per year for distribution all over Europe. The plant had an anaerobic reactor for wastewater treatment, but effluent quality did not meet the requirements for discharge to the sewer system. ...

  • The application of Flow Injection Technology to automating cold vapor MERCURY analyses

    This document describes the application of flow injection technology to cold vapor mercury analyses. It can be obtained from PerkinElmer by requesting method number ENVA-100. Appendices 1 and 2 show letters from the US EPA indicating acceptability through the Alternate Test Program for both drinking water and wastewater sample analysis. 1.0 Scope and Application 1.1 This ...


    By PerkinElmer, Inc.

  • Granador juice, Switzerland A Case Study

    Case Study: Food & Beverage IndustryClient: Granador AG SwitzerlandStart Up: July 2004Capacity: 500 m3/d Overview Granador, a premium brand of Unidrink AG, is a well known beverage producer, located in Hitzkirch, Switzerland. Granador produces about 45 million bottles per year for distribution all over Europe. The plant had an anaerobic reactor for ...

  • Efficient Waste Water Treatment

    Clean drinking water is an essential need of mankind. Often surface water like rivers or lakes is used as drinking water source. To prevent these resources from pollution the effective treatment of waste water is a must. For example in China 75% of discharged waste water is coming from pulp and paper, textile and dyeing industries. To run a waste water treatment plant in the most efficient way ...


    By J.V. Niebergall CDH

  • Zero Waste System in Paradise

    Most visitors to Fiji come for rest and relaxation on the white sand beaches or for diving and snorkeling among the unspoiled coral reefs. Few visitors realize that this tropical island in the South Pacific, north of New Zealand, is on the cutting edge of industrial ecology with a fully functional, zero waste program located near the Fijian capital of Suva. As part of an EPA funded review of ...


    By BioCycle Magazine

  • Real-time TOC tightens effluent control at Greencore

    A food manufacturing facility in Selby has installed a new continuous TOC (Total Organic Carbon) monitor, ‘the BioTector’ which has dramatically improved the site’s capability to refine and improve the plant’s wastewater treatment process. As a result the plant is better able to quickly respond to changes in the influent. Greencore Foods is a leading player in the food ...


  • Becoming a Zero Emissions Brewery

    Diverting 600 tons annually from landfills turn hops, grains, pallets, cardboard, glass, office paper and shrink wrap into major savings — and great beer! ALMOST AS FAMOUS for reducing its waste as for making great beer, Mad River Brewing Company of Blue Lake, California is renowned for its Steelhead and Jamaica ales as well as its ten Waste Reduction Awareness Program (WRAP) awards ...


    By BioCycle Magazine

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you