boiler emissions Articles

  • Bionomic Boiler MACT Emission Control Technologies

    Introduction Bionomic Industries' extensive line of field-proven, cost effective wet and dry scrubber and electrostatic technology choices can easily and economically help you achieve compliance with EPA Boiler MACT regulations for hydrochloric acid, particulate or mercury control. Bionomics' wide range of equipment enables selection of the best control technology to remove a specific or ...


    By Bionomic Industries Inc.

  • Boiler mact - what the new emissions limits on industrial boilers mean for you

    Generically known as “Boiler MACT”, the new possible industrial boiler limits directly address emissions of Hazardous Air Pollutants (HAPs) from industrial boilers and indirectly address the way that industrial sources operate their boilers. This white paper explains how Boiler MACT affects you and how to maintain operating flexibility while addressing compliance issues. The most ...

  • Proposed boiler MACT sets aggressive emission limits

    On June 4, 2010, U.S. EPA proposed National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions.  EPA proposed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater ...


    By Trinity Consultants

  • EPA finalizes boiler NESHAP

    EPA published the final National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions. EPA developed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater than 25 tpy of ...


    By Trinity Consultants

  • Controlling Stack Emissions in the Wood Products Industry & Wood Fired Boilers

    Electrostatic precipitation has been a reliable technology since the early 1900's. Originally developed to abate serious smoke nuisances, the manufacturers of zinc, copper, and lead quickly found electric gas cleaning a cost efficient way to recover valuable product carried out of the stacks from furnace operations. Today electrostatic precipitators are found mainly on large power plants, cement ...

  • Tuning Your Boiler for EPA Boiler MACT Compliance

    The EPA’s Boiler MACT regulations are heating up. Boiler MACT is an EPA rule to limit hazardous air pollutants (HAP) from commercial and industrial boilers and process heaters. Originally proposed in 2011 as a mandate driven by the Clean Air Act,  the rules are Area Source Boiler MACT 40 CFR 63, subpart JJJJJJ for smaller boilers (stores, hotels, apartments, ...


    By Sierra Instruments, Inc.

  • Low-emission coal burning technology

    Customer: Foster Wheeler Energy, Siemens, EnergoProjekt Katowice Challenge: One third of carbon dioxide emissions caused by humans come from the burning of fossil fuels in energy production. How to reduce them? Solution: Developing a circulating fluidised bed (CFB) boiler where fossil fuels are combusted with pure oxygen separated from the air. ...

  • A novel approach for modelling of NOx emission reduction in a tangentially fired coal boiler

    In this research paper, predictive modelling of NOx emission of a 210 MW capacity pulverised coal–fired boiler and combustion parameter optimisation to reduce NOx emission in flue gas is proposed. The effects of oxygen concentration in flue gas, coal properties, coal flow, boiler load, air distribution scheme, flue gas outlet temperature and nozzle tilt were studied. The data collected from ...


    By Inderscience Publishers

  • New boiler MACT and affiliated rules proposed

    EPA proposed three related rules (with final rules expected by December 16, 2010), intended to reduce the emission of hazardous air pollutants (HAPs) from industrial, commercial, and institutional boilers and process heaters as well as commercial and industrial solid waste incinerators. Simultaneously, it also proposed a definition of solid waste that could potentially affect some units currently ...


    By Trinity Consultants

  • Portable Emissions Analyzers for Mining Applications - Case study

    When extracting and refining valuable geological materials from the earth (eg. limestone, aluminum oxide, gold), a variety of industrial combustion processes are required. The machinery used in these processes such as industrial engines, boilers, and smelters can emit highly toxic gases that are harmful to the environment and to human life. Using a portable emissions analyzer enables mining ...

  • Magnetic-emission model of catalytic fuel oxidation

    In the following paper, the magnetic-emission model of catalytic fuel oxidation is described. On the basis of this model, the process of methane oxidation of catalytic surface is considered, and the method of efficient adsorption of catalytic radiation is presented.Keywords: catalytic surface, catalytic fuel combustion, magnetic-emission model, catalytic radiation, efficient adsorption, catalytic ...


    By Inderscience Publishers

  • The Wait Is Over; The New Boiler MACT Is Here

    The Wait Is Over; The New Boiler MACT Is Here    April 29, 2010 was a busy day for U.S. EPA and marked the culmination of months and years of background effort and planning related to air toxic emissions from boilers.  U.S. EPA has released pre-publication versions of four (4) proposed rules on their website that, when finalized, will impact thousands of ...


    By All4 Inc.

  • Boiler mass spec diagnostic testing case study

    CK Environmental was retained by Ze-Gen, to conduct a diagnostic emissions test program on their pilot plant in New Bedford, Massachusetts. Ze-gen is a leading developer and integrator of waste gasification technology which converts construction and demolition waste (C&D) and municipal solid waste (MSW) into near zero-emissions syngas and electrical energy. The ...


    By CK Environmental, Inc.

  • Continous Emission Monitoring (CEMs)

    Presented in Track B1: CEMs at EUEC 2011,January 31 Phoenix, Arizona   B1.1  | Particulate CEM for wet FGD plant William Averdieck |  Managing ...

  • Navigating NSPS subpart Db for boilers: a case study

    Over the past year, Trinity assisted a chemical company with the permitting and installation of a new 220 MMBtu/hr package boiler. The new natural gas-fired boiler replaces coal-fired units that were installed in the 1940s. Navigating through the numerous, and at times conflicting, regulatory requirements applicable to such a unit has been challenging. With careful planning and implementation, ...


    By Trinity Consultants

  • Boilers, Solid Waste, and the CAA....Oh My!

    Boilers, Solid Waste, and the CAA....Oh My!   ...


    By All4 Inc.

  • The Flexibility & Versatility of a Portable Emissions Analyzer

    Issue Fixed CEMS (Continuous Emissions Monitors) Measure at One Location CEMS are fixed units that typically only measure from one sample location which is usually on a main centralized stack. This main stack is often fed by several separate emissions sources throughout the plant such as boilers, heaters, engines, ovens, and furnaces. If the CEM ...

  • Reduced Emissions for Landfill Gas Installations

    The use of landfill gas as a source of renewable energy is increasing. For environmental and safety reasons, the owners of the waste storage sites have to strictly monitor and control the construction, operations, and emissions generated. Sulzer offers solutions to control these emissions within the limits given by the government. Landfill gas is similar to natural gas, but it is created by ...


    By Sulzer Ltd.

  • Advanced SNCR - NOx Reduction on Large Utility Boilers

    Fuel Tech has recently completed full-scale demonstrations of Advanced Selective NonCatalytic Reduction systems on a number of large utility boilers (>600MW) firing a variety of fuel types. The systems use the latest flexible injection technology and are controlled with a balanced algorithm utilizing unit load, a full grid of continuous furnace temperatures and the plant continuous emissions ...


    By Fuel Tech, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you