boiler feed monitoring Articles

  • Real Time TOC Analysis in Steam and Condensate

    Executive Summary Steam in petro/chemical plants could be contaminated with hydrocarbons (TOC = Total Organic Carbons) from various sources. In any case this is a sign for defects in the process, whether it they occur in the heat exchanger, the blow down vessel, the condensate recovery or other parts of the system. Conventional solutions to monitor such contaminations use TOC- ...


    By JCT Analysentechnik GmbH

  • Common Boiler Feed Water Treatment Issues and How to Avoid Them

    When treating boiler feed water (the combination of boiler makeup and condensate return water), several issues can arise that cause boiler scaling, corrosion, fouling, and system failure. Below, we break down the most common boiler feed water issues and how to avoid them to help ensure system efficiency and operational safety. While treating boiler feed water is extremely ...


    By SAMCO Technologies, Inc.

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • Boiler Dissolved Oxygen Control

    DISSOLVED OXYGEN CHEMISTRY Dissolved Oxygen (DO) is a measure of the amount of oxygen, usually thought of as a gas, that is dissolved in a liquid such as water. Oxygen is essential to life and is also the most common element found taking part in corrosion reactions. DO can be thought of as the fuel needed for the corrosion process to proceed. It is the corrosion reactions that necessitate ...


    By IC Controls Ltd.

  • Application notes: The Sievers InnovOx TOC analyzer: boiler water monitoring

    Background A boiler system is a semi-closed loop system in which water is heated and converted into steam to power a generator. The steam is then allowed to form a condensate and the process is repeated. Boiler water chemistry directly impacts boiler efficiency and fuel use. Improper water treatment allows scale formation and corrosion. Boiler scale and deposits form when impurities ...


    By GE Analytical Instruments

  • Notting hill - condensing boiler case study

    Customer: Notting Hill Housing Trust Location: Hammersmith Heating System: Worcester Bosch Condensing System Boiler Installed: 01/10 This is a large 6 Bedroom Victorian Terrace Town House, which was built over 100 years ago and is typical of thousands of similar houses in Suburban London. The ...


    By Vortex Energy Saver

  • Organics Monitoring: A Practical Guide

    Preventing product loss, lowering waste treatment costs, and reducing system maintenance and energy consumption through organics monitoring in the chemical, refining, food, and wastewater treatment industries. Summary Process water and steam condensate contamination includes organic, inorganic, and biological components. Sources of organic contamination include process ...


    By GE Analytical Instruments

  • Hydrocarbon in Water Monitors using Fluorescence

    Hydrocarbon in Water Monitors using Fluorescence are capable of detecting hydrocarbons as low as 5 Parts per Billion and as high as 10,000 Parts per Million depending on the application.  Because only the target hydrocarbons will fluoresce, these monitors have no significant affect due to water turbidity (rust, dirt, gas bubbles, soot, etc.).  Fluorescence monitors provide a measurement ...

  • Maxsys Fuel Systems Help Hospital Reduce Carbon Footprint with 5.1% Saving on Boiler Fuel Bill

    Fuel energy saving systems supplied and installed by Maxsys are providing improved efficiency to three steam-raising boilers at The Princess of Wales Hospital in Bridgend, a district general hospital within the Bro Morgannwg NHS Trust. The combined effect of the investment is a significant reduction in the organisation’s carbon footprint along with a 5.1% saving on the hospital’s ...


    By Maxsys Fuel Systems Ltd

  • NOx in Non-Utility Industries - Part II - Control options and monitoring methodology

     This the second in a two-part series. Part I, which appeared in our June 2001 issue focuses on air emission origins of nitrogen oxides (NOx) in non-utility industries. Choice of the NOx control technology is dependent on many factors, including regulatory requirements, technical feasibility, cost and public perception. Figure 1, compiled based on publications [1-5], presents a summary of ...


  • Total Dissolved Solids (TDS) Measurement

    Definition Total Dissolved Solids (TDS) is a measure of the sum of all inorganic and organic substances in a liquid in molecular, ionized or micro-granular colloidal suspended form. The solids must be small enough to survive filtration through a sieve the size of two micrometer.  TDS solids are normally found in all freshwater systems. Major applications of TDS are: at low levels the ...


    By IC Controls Ltd.

  • 4.5 MWe Refuse Derived Fuel to Energy Plant Case Study

    This 4.5 MWe Biomass Power Plant is one of the turnkey products of Biomass Power. The plant has a capacity of 24 MW thermal and rated at 4.5 MWe producing 35,476MWh of green electricity per year, 100% of which is exported to the grid. The fuel used is segregated biomass from a commercial and industrial waste collection business. The fuel is produced by removing some of the recyclable material ...


    By Biomass Power Limited (BPL)

  • New gas calibration method eases TOC analysis

    LAR Process Analysers AG of Berlin,  Germany expanded the range of feaiures of its measuring device QuickTOC, which facilitates the monitoring of ultra pure and cooling water, boiler feed and condensate measurement, and industrial wastewaters. For many years, the Berlin company lias been developing, high quality measuring devices and processes for the TOC analysis of condensates and boiler ...


    By LAR Process Analysers AG

  • 2 MWe Biomass Power Plant Case Study

    This 2 MWe Biomass Power Plant is one of the turnkey products of Biomass Power. The plant was fully commissioned in September 2007. The plant has a capacity of 11 MW thermal and rated at 2MWe producing 15,700 MWh of green electricity per year, 100% of which is exported to the grid. The fuels used are from forestry and agricultural residues, wet woodchips, compost oversize, straw and miscanthus, ...


    By Biomass Power Limited (BPL)

  • Specialized systems for offshore oil platforms

    Lifestream provides desalination systems to meet the complex needs for water on oil drilling platforms. Specialized features provide flexibility to the operation of the system as well as safety. When planning an installation, the end user can choose to add the features shown to the standard R/O system. Hazardous Location Requirements Systems are built to Class 1, Group B, Division 1 ...


    By LIFESTREAM Watersystems Inc.

  • Ethanol by-product raises biogas output

    In 2007, the City of Fergus Falls, Minnesota undertook a study to evaluate adding thick corn stillage to the anaerobic digesters at its wastewater treatment plant (WWTP). The goal was to determine the potential for codigesting syrup with biosolids to increase biogas production, while avoiding operational and regulatory problems. The Fergus Falls WWTP operates three digesters in series, two ...


    By BioCycle Magazine

  • Energy Recovery from Residual Waste by Means of Anaerobic Digestion Technologies

    ABSTRACT Anaerobic digestion (AD) is a natural process, spontaneously taking place in natural surroundings, such as marshes,bogs, paddies, or in cesspits, landfills, and dedicated digesters, used for the conversion of organic waste into a rich gas. Typical AD substrates are: manure, sewage sludge, high BOD wastewater, and – more recently - the organic fraction of Municipal Solid Waste (MSW), ...


    By ORBIT e.V.

  • Biomass fired thermal oil heater case study

    This 12 MWth output Biomass Power Plant is one of the turnkey products of Biomass Power. The plant was fully commissioned in December 2006. The system has a capacity of 12 MW thermal output producing up to 10MWth of 300°C 10 Barg pressure hot oil, up to 10 tonnes per hour of steam and 2 MWth of 200°C hot air. This is all achieved from one grate heating three separate heat exchanges. The ...


    By Biomass Power Limited (BPL)

  • Five of the Best Cooling Tower Water Treatment Equipment Supply and Technology Companies

    Here at SAMCO technologies, our custom-engineered, cutting-edge solutions for your cooling tower water treatment needs have been developed by helping our customers solve some of the most complex purity and separation issues globally for over 40 years. Because of our skilled engineers and overall expertise in cooling tower water treatment, we are confident that our solutions are some of the best ...


    By SAMCO Technologies, Inc.

  • Case study - Biogen Greenfinch Westwood

    Non-stop clean power generation uses smart machines and state-of-the-art technology to help keep running. Keep it simple - and to keep it profitable, keep CHP engines running. That's just part of the formula for success at the BiogenGreenfinch-designed and run Westwood anaerobic digestion (AD) plant in Northamptonshire. Built and funded by parent company Bedfordia Group plc this £10 ...


    By Geotech

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you