boiler safety Articles

  • Introducing LaserGas III SP CO – a combustion analyzer for rough environments

    NEO Monitors unveils the industry’s most compact CO combustion analyzer suitable for the most demanding environments. LaserGas III CO includes measurement of CH4, H2O and temperature in one single unit designed to reduce risk. Based on decades of experience and customer feedback, NEO Monitors has designed an Ex-d certified tunable diode laser (TDLS) analyzer. The instrument is ...


    By NEO Monitors AS

  • Reduced Emissions for Landfill Gas Installations

    The use of landfill gas as a source of renewable energy is increasing. For environmental and safety reasons, the owners of the waste storage sites have to strictly monitor and control the construction, operations, and emissions generated. Sulzer offers solutions to control these emissions within the limits given by the government. Landfill gas is similar to natural gas, but it is created by ...


    By Sulzer

  • Problems of catalytic boiler safety and their role in designing and operation of gas-fired boiler

    In the following paper, some problems of safety for catalytic boilers with fixed and fluidised beds are discussed. The reason is to protect the boiler from gas and fuel-air mixture explosion. For it the conditions excluding the transition from catalytic combustion to flame must be observed, and they are presented in the article for different combustible gases. A special attention has been paid to ...


    By Inderscience Publishers

  • Checklist for Boiler Maintenance

    Boilers play a crucial role at industrial facilities and it is imperative that they be safely and properly maintained. Routine boiler maintenance can help prevent unplanned shutdowns and outages, increase the efficiency of the boiler and cut operating costs, and ensure that the facility is in full compliance with all laws and regulations governing boiler safety. What follows is a boiler ...


    By STI Group, Inc.

  • Attention to the use of steam boilers in the industry

    In the industry, if people need to use high-temperature steam , then the steam boiler will be used; water can be heated to a quite high temperature, and generates high-temperature steam . Steam boilers and other hot water boiler are not the same , if people want to use the steam boiler, the boiler must be certified , or else once operated wrongly , then the consequences are very terrible.  ...

  • Monitoring flammable gas in boiler houses

    The most common fuels in use for space and water heating are Oil, Natural Gas and Liquid Petroleum Gas (LPG). By far the most popular, clean and cost effective solutions are utilising Natural Gas or LPG. The traditional safety measure derived from the time of oil fired boiler houses is the use of a fusible link placed above the each boiler. The fusible link is intended to melt if it becomes ...

  • Comfort and safety

    Type HOFGAS® - Ready/C 300  Commissioning 2004Site Moncorneil (FR) Situation Moncorneil is a medium-sized landfill near Toulouse. A heating boiler is to be operated with landfill gas and the acquired heat is used for leachate treatment. In view of the complete landfill design the customer demands a container construction with remote monitoring of the plant.   ...


    By Hofstetter BV

  • Fire prevention measures in gas fired boiler’s operation

    Gas fired boiler is a kind of industrial boiler using natural or coal gas as fuel,its fuel is risky,especially,fire leakage in the operation is easy to ...


  • Hydroflo diaphragm pumps help reduce boiler corrosion and maintenance costs

    ABTCo, located in Alpena, Michigan, is a decorative wood paneling producer using three boilers to generate 7 MW of electricity – half the power needed in the plant plus steam for pulp processing. As in many boiler operations, the main enemy is corrosion, which can destroy system components and lead to boiler failure. Although internal boiler surfaces are protected by a film of magnetic ...

  • Common Boiler Feed Water Treatment Issues and How to Avoid Them

    When treating boiler feed water (the combination of boiler makeup and condensate return water), several issues can arise that cause boiler scaling, corrosion, fouling, and system failure. Below, we break down the most common boiler feed water issues and how to avoid them to help ensure system efficiency and operational safety. While treating boiler feed water is extremely ...


    By SAMCO Technologies, Inc.

  • What Is a Boiler Feed Water Treatment System and How Does It Work?

    For industrial companies using a boiler for its facility, some type of boiler feed water treatment system is usually necessary to ensure an efficient process and quality steam generation. The most appropriate boiler feed water treatment system will help the facility avoid costly plant downtime, expensive maintenance fees, and boiler failure as a result of scaling, ...


    By SAMCO Technologies, Inc.

  • Temperature and leak monitoring boosts safety and reliability

    Amcor Flexibles Singen GmbH is a manufacturer of printed and unprinted aluminum-based packaging materials and an experienced technical applications specialist. Its plant in Germany, equipped with rolling mills and finishing equipment, turns out approximately 200 million square meters of aluminum foil in various grades every year. High-performance drying equipment is essential for Amcor’s ...


    By ALLWEILER GmbH

  • Monitoring vibrations, mechanical seals, and bearings for safety and performance

    With more than 70 years of experience in plastics processing, Switzerland-based Quadrant Group is a leading expert in a wide range of polymer materials and technologies for polymer conversion. In order to maintain a high level of quality in the production process, Quadrant's heat-transfer pumps must work safely and reliably. These pumps are commonly subjected to high loads. At the same time, ...


    By ALLWEILER GmbH

  • What are the Safety Parameters Followed by Pressure Vessel Manufacturers

    Safety has always been a huge priority where pressure vessels are concerned. The use of poorly designed and manufactured pressure vessels has resulted in the deaths of millions of men and women over the years. To reduce the staggering number of fatalities, pressure vessel manufactures are required to adhere to the standards and guidelines laid down by Government bodies. API and ...


  • Carbon Monoxide (CO) and Carbon Dioxide (CO2) Safety

    Know the Gases, Know the Dangers and Protect Yourself Do you know the differences between carbon monoxide (CO) and carbon dioxide (CO2)? If you don’t then there are no guarantees your safety measures will be adequate. These two different gases are often mixed up with people becoming confused over which they need to protect against, when and how. ...


    By SHEilds Ltd

  • Methods of observing the safety and some special features of catalytic power plants

    In the present paper, two construction methods for observing safety of catalytic boilers with fixed and fluidised bed are presented. They are connected with using the fuel nozzles cooled by water and the flame extinction filters. The experiments confirmed their positive effect. The article also contains the descriptions of some features of catalytic thermal power plants concerning their capacity ...


    By Inderscience Publishers

  • Catalytic combustion of fuels and existing ways for its implementation

    The new technology of flameless high-temperature combustion of fuel on the basis of catalytic method has the advantages consisting of the ecological cleanliess of process, the growth of volume thermal stress of furnace space and the reduction of specific quantity of metal and boiler cost. Application of catalytic boiler plants allows to bring in the maximum produced heat to the customers. Thus, ...


    By Inderscience Publishers

  • Economics of tiny thermal power plants

    Thermal power plants is the main source of energy and electricity in India and almost all countries of the world. Most of the giant thermal power plants have capacity of 500MW to 1000 MW. Investment in such giant thermal power plants is Rs 100 million per MW including transmission lines and distribution lines. ( 60 rupees = 1 US$, MW=1000KW). So 1000MW thermal power plant costs Rs 100 million/MW ...


    By AADHUNIK GLOBAL ENERGY

  • Luminant Oak Grove Power Station - Case Study

    Powering Texas Luminant, a subsidiary of Energy Future Holdings Corp. (EFH) -which owns competitive and regulated energy subsidiaries in Texas -is the largest electricity generator in Texas. Unit two of the Oak Grove Power plant near Franklin in Robertson County, TX went online in the middle of 2010. Fluor, the project’s EPC company, completed the plant in 35 months and used ...

  • The advantage of speed for damper drive applications - Case Study

    Overview There certainly is no substitute for speed. In nature, on the athletic field or on the computer, superior speed makes all the difference. Pneumatic-powered damper drives are excellent choices for speed sensitive installations. There are no motor windings or gear sets that can compete on pure speed applications the way a quick acting pnuematic drive can react. For combustion air and ...


    By Rotork

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you