boiler system Articles

  • Real Time TOC Analysis in Steam and Condensate

    Executive Summary Steam in petro/chemical plants could be contaminated with hydrocarbons (TOC = Total Organic Carbons) from various sources. In any case this is a sign for defects in the process, whether it they occur in the heat exchanger, the blow down vessel, the condensate recovery or other parts of the system. Conventional solutions to monitor such contaminations use TOC- ...


    By JCT Analysentechnik GmbH

  • Reduced Emissions for Landfill Gas Installations

    The use of landfill gas as a source of renewable energy is increasing. For environmental and safety reasons, the owners of the waste storage sites have to strictly monitor and control the construction, operations, and emissions generated. Sulzer offers solutions to control these emissions within the limits given by the government. Landfill gas is similar to natural gas, but it is created by ...


    By Sulzer

  • Introducing LaserGas III SP CO – a combustion analyzer for rough environments

    NEO Monitors unveils the industry’s most compact CO combustion analyzer suitable for the most demanding environments. LaserGas III CO includes measurement of CH4, H2O and temperature in one single unit designed to reduce risk. Based on decades of experience and customer feedback, NEO Monitors has designed an Ex-d certified tunable diode laser (TDLS) analyzer. The instrument is ...


    By NEO Monitors AS

  • Refinery boiler FGD Pemex

    A large boiler company required a FGD system for two, 200,000 lbs/hr fuel oil boilers for a refinery in Mexico. Macrotek competed with major air pollution suppliers and succeeded to win the contract. The scope included two spray towers, all auxiliary components, pumping packages, a forced oxidation system, piping, and controls. In addition, integral stacks were included for the overall height of ...


    By Macrotek Inc.

  • EPA finalizes boiler NESHAP

    EPA published the final National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions. EPA developed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater than 25 tpy of ...


    By Trinity Consultants

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • The Boiler Optimization Journey

    The Boiler Optimization Journey talks about the evolution of power plant optimization software over the past 15 years, from neural network-based systems that advised operators how to bias fuel and air in the furnace to reduce NOx emissions, to integrated closed-loop combustion and sootblowing systems that use hybrid AI technologies, solve a broad range of challenges, and provide enhanced ...


    By NeuCo, Inc.

  • Boiler Dissolved Oxygen Control

    DISSOLVED OXYGEN CHEMISTRY Dissolved Oxygen (DO) is a measure of the amount of oxygen, usually thought of as a gas, that is dissolved in a liquid such as water. Oxygen is essential to life and is also the most common element found taking part in corrosion reactions. DO can be thought of as the fuel needed for the corrosion process to proceed. It is the corrosion reactions that necessitate ...


    By IC Controls Ltd.

  • Checklist for Boiler Maintenance

    Boilers play a crucial role at industrial facilities and it is imperative that they be safely and properly maintained. Routine boiler maintenance can help prevent unplanned shutdowns and outages, increase the efficiency of the boiler and cut operating costs, and ensure that the facility is in full compliance with all laws and regulations governing boiler safety. What follows is a boiler ...


    By STI Group, Inc.

  • Organics in boiler water condensate

    With the wide use of high efficiency boilers and current high-pressure boilers in industry today limiting condensate analysis to the more traditional parameters can result in very expensive repairs. Condensate return should be the highest quality least expensive water that most systems can generate. Boiler operators do not want to lose this or have it contaminated. Condensate return analysis has ...


    By LAR Process Analysers AG

  • Frequency Converter energy savings on Boilers

    Boilers and heaters account for a significant share of a plant's purchased fuel cost. Combustion air fans are necessary to provide enough combustion air to the boiler or heater's burner system. Louvers, inlet guide vanes or frequency converters control the amount of air allowed into a boiler. Configuring a combustion air fan to allow the proper amount of air into the burner can improve boiler ...


  • Experience on coal reburn in a utility boiler

    Reburning is an in-furnace combustion modification technology for the reduction of NOx. By staging the introduction of the fuel, an environment is created where NOx generated by the combustion of the main fuel supply is subsequently consumed by the hydrocarbon radicals arising from the reburn fuel under reducing conditions. ENEL has retrofitted unit No. 4 of Vado ...


    By Inderscience Publishers

  • How To Prolong The Life Of Your Boiler

    Regularly boiler maintenance will prolong the life of your boiler and improve efficiency, saving you money. Over the years sludge can build up within the system making it work harder, causing it to be inefficient and expensive to keep. A planned maintenance will flush the system, removing the sludge and other deposits, your gas engineer will also treat the boiler. Flushing a new system will also ...


    By Waltham Technologies, Inc.

  • Monitoring flammable gas in boiler houses

    The most common fuels in use for space and water heating are Oil, Natural Gas and Liquid Petroleum Gas (LPG). By far the most popular, clean and cost effective solutions are utilising Natural Gas or LPG. The traditional safety measure derived from the time of oil fired boiler houses is the use of a fusible link placed above the each boiler. The fusible link is intended to melt if it becomes ...

  • Chemically Inclined: The Case for Clean Boilers

    Boiler cleaning is something most companies don’t want to think about — if boilers are working within operational limits it’s often easier to keep up with smaller preventative maintenance (PM) tasks but put off a total chemical clean ...

  • Dewatering of Boiler Ash - Case Study

    Ten Gate develops and produces materials that function to increase performance, reduce costs, and deliver measurable results by working with our customers to provide advanced solutions. THE PROJECT The Wheelabrator Technology Group provides design/build and operation of trash-to-energy facilities. The Wheelabrator facility located in Lisbon, CT utilizes a storage tank for ...

  • What Is a Boiler Feed Water Treatment System and How Does It Work?

    For industrial companies using a boiler for its facility, some type of boiler feed water treatment system is usually necessary to ensure an efficient process and quality steam generation. The most appropriate boiler feed water treatment system will help the facility avoid costly plant downtime, expensive maintenance fees, and boiler failure as a result of scaling, ...


    By SAMCO Technologies, Inc.

  • Electrostatic ReCyclone® systems: Modelling and application to emission control from biomass boilers

    The recent development of efficient electrostatic ReCyclone® systems allows their application to biomass boilers for strict legal limit compliance. The purpose of this paper is to present a model to predict in a more realistic way the collection efficiency of a gas cyclone with an electrostatic enhanced recirculation system. These systems consist in an optimized reverse-flow cyclone (col- ...

  • Scaling vs. Corrosion: Why It Matters for Your Boiler Feedwater System

    When using boilers for an industrial plant and process, one of the most important things to implement is the appropriate treatment of the boiler feedwater before it has a chance to scale and corrode equipment. Before beginning any process with a boiler, understanding the makeup and return water chemistry/characteristics, the manufacturer’s requirements for the boiler (what pressure it ...


    By SAMCO Technologies, Inc.

  • Do You Need a Boiler Feedwater Treatment System for Your Plant?

    If you use an industrial boiler to create energy with steam, chances are you need some sort of boiler feedwater treatment system. But why? We know that natural water sources carry impurities that can cause harmful deposits, carryover, and corrosion in your boiler system. We also know that the higher the pressure your boiler runs at, the more pure your water source needs to be. ...


    By SAMCO Technologies, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you