boiler water monitoring Articles

  • Organics in boiler water condensate

    With the wide use of high efficiency boilers and current high-pressure boilers in industry today limiting condensate analysis to the more traditional parameters can result in very expensive repairs. Condensate return should be the highest quality least expensive water that most systems can generate. Boiler operators do not want to lose this or have it contaminated. Condensate return analysis has ...


    By LAR Process Analysers AG

  • Application notes: The Sievers InnovOx TOC analyzer: boiler water monitoring

    Background A boiler system is a semi-closed loop system in which water is heated and converted into steam to power a generator. The steam is then allowed to form a condensate and the process is repeated. Boiler water chemistry directly impacts boiler efficiency and fuel use. Improper water treatment allows scale formation and corrosion. Boiler scale and deposits form when impurities ...


    By GE Analytical Instruments

  • Hydrocarbon in Water Monitors using Fluorescence

    Hydrocarbon in Water Monitors using Fluorescence are capable of detecting hydrocarbons as low as 5 Parts per Billion and as high as 10,000 Parts per Million depending on the application.  Because only the target hydrocarbons will fluoresce, these monitors have no significant affect due to water turbidity (rust, dirt, gas bubbles, soot, etc.).  Fluorescence monitors provide a measurement ...

  • Checklist for Boiler Maintenance

    Boilers play a crucial role at industrial facilities and it is imperative that they be safely and properly maintained. Routine boiler maintenance can help prevent unplanned shutdowns and outages, increase the efficiency of the boiler and cut operating costs, and ensure that the facility is in full compliance with all laws and regulations governing boiler safety. What follows is a boiler ...


    By STI Group, Inc.

  • Where is water temperature monitoring most important?

    It is essential to monitor for abnormalities in water temperature, as the water chemistry can be significantly affected by fluctuations. Whether you are monitoring domestic or commercial water supplies, the temperature should be regularly checked. We would recommend regular water testing for all water supplies and, in agriculture, for continued monitoring of natural water formations. ...


    By Aquaread Limited

  • Common Boiler Feed Water Treatment Issues and How to Avoid Them

    When treating boiler feed water (the combination of boiler makeup and condensate return water), several issues can arise that cause boiler scaling, corrosion, fouling, and system failure. Below, we break down the most common boiler feed water issues and how to avoid them to help ensure system efficiency and operational safety. While treating boiler feed water is extremely ...


    By SAMCO Technologies, Inc.

  • Boiler Dissolved Oxygen Control

    DISSOLVED OXYGEN CHEMISTRY Dissolved Oxygen (DO) is a measure of the amount of oxygen, usually thought of as a gas, that is dissolved in a liquid such as water. Oxygen is essential to life and is also the most common element found taking part in corrosion reactions. DO can be thought of as the fuel needed for the corrosion process to proceed. It is the corrosion reactions that necessitate ...


    By IC Controls Ltd.

  • EPA finalizes boiler NESHAP

    EPA published the final National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions. EPA developed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater than 25 tpy of ...


    By Trinity Consultants

  • Fabrication and evaluation of an attapulgite membrane as the filter for recycling blowdown water from industrial boilers

    Continuous blowdown water (CBW) from industrial boilers is of great quantity and energy, and therefore worth recycling. According to the data from a long period of monitoring, carbonate and sulfate were documented as the main contaminants in CBW. Herein, an attapulgite (ATP) membrane was prepared on a macroporous Al2O3 support through solid state sintering. The prepared membrane ...


    By IWA Publishing

  • Case study - Water quality monitoring and weather data at Pampulha Lake-Brasil

    In 2010, OTT Hydromet's partner in Brasil,  Hexis began working with CETEC. This resulted in the installation of a buoy, equipped with an automatic profiling system, in early 2013. The project’s objective is the continuous monitoring of the lake’s water quality, with focus on improving this by the 2014 World Cup Games.  Adcon, Lufft and OTT technologies (Hydrolab DS5X ...


    By OTT HydroMet

  • BTC coatings for trouble-free Boiler Operation

    In April 2014, the CastoLab® Division of Eutectic Canada performed an on-site coating contract for a Steel Mill. The work was performed on a critical section of the Fume Extraction Ducting: a series of water cooled tubes which remove heat from the exhaust fumes exiting the drop box. Conveyed within the ducting is hot ash debris which is corrosive and very abrasive. In this particular job, the ...


    By Castolin Eutectic

  • Organics Monitoring: A Practical Guide

    Preventing product loss, lowering waste treatment costs, and reducing system maintenance and energy consumption through organics monitoring in the chemical, refining, food, and wastewater treatment industries. Summary Process water and steam condensate contamination includes organic, inorganic, and biological components. Sources of organic contamination include process ...


    By GE Analytical Instruments

  • Utility Monitoring in a School Building

    Universal Input Data Loggers Offer Total Building Solution A customer needed a utility monitoring solution to accurately monitor utility usage in a school building, totalized by floor. They needed to present this data in an easy-to-understand dashboard for each wing and as an aggregate total for the entire building. The client also had electric sub-panels on each floor, but they are separated ...


    By CAS DataLoggers

  • Continous Emission Monitoring (CEMs)

    Presented in Track B1: CEMs at EUEC 2011,January 31 Phoenix, Arizona   B1.1  | Particulate CEM for wet FGD plant William Averdieck |  Managing ...

  • Proposed boiler MACT sets aggressive emission limits

    On June 4, 2010, U.S. EPA proposed National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions.  EPA proposed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater ...


    By Trinity Consultants

  • Advanced SNCR - NOx Reduction on Large Utility Boilers

    Fuel Tech has recently completed full-scale demonstrations of Advanced Selective NonCatalytic Reduction systems on a number of large utility boilers (>600MW) firing a variety of fuel types. The systems use the latest flexible injection technology and are controlled with a balanced algorithm utilizing unit load, a full grid of continuous furnace temperatures and the plant continuous emissions ...


    By Fuel Tech, Inc.

  • Insitu analysis of ammonia slip and water vapor using a tunable diode laser for SCR/SNCR optimization and boiler tube surveillance in power plants

    ABSTRACT Environmental Regulations driven by the 1990 Clean Air Act require Power Plants to reduce NOx emissions. SCR's and SNCR's reduce NOx emission by injecting ammonia into the combustion flue gas. which ideally reacts with the NOx to form H?0 and Nj. The efficiency of the SCR SNCR is determined by monitoring the outlet for excess NH3. referred to as NH3 slip. The flue gas sample ...

  • Temperature and leak monitoring boosts safety and reliability

    Amcor Flexibles Singen GmbH is a manufacturer of printed and unprinted aluminum-based packaging materials and an experienced technical applications specialist. Its plant in Germany, equipped with rolling mills and finishing equipment, turns out approximately 200 million square meters of aluminum foil in various grades every year. High-performance drying equipment is essential for Amcor’s ...


    By ALLWEILER GmbH

  • Methods of Water Purification

    This article is excerpted from 'Pure Water Handbook' published by Osmonics®, Inc. of Minnetonka, Minnesota USA and is printed with permission of Osmonics, Inc. Water treatment can be defined as any procedure or method used to alter the chemical composition or natural 'behavior' of a water supply. Water supplies are classified as either surface water or groundwater. The majority of public or ...

  • Monitoring vibrations, mechanical seals, and bearings for safety and performance

    With more than 70 years of experience in plastics processing, Switzerland-based Quadrant Group is a leading expert in a wide range of polymer materials and technologies for polymer conversion. In order to maintain a high level of quality in the production process, Quadrant's heat-transfer pumps must work safely and reliably. These pumps are commonly subjected to high loads. At the same time, ...


    By ALLWEILER GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you