bolted water tank Articles

  • “Tank in a Box” is a good neighbor

    As most water districts and municipalities have experienced, every new construction project generates some opposition from people living in proximity to the project. In a recent project located in Westlake Village, CA, some residents have been openly very critical of the 5,000,000 gallon concrete water storage tank under construction. One local resident stated he counted 58 concrete trucks ...


    By Superior Tank Co., Inc.

  • Environmentally friendly - Tank in a box

    Bolted steel water storage tanks have been used for many years with great success and low levels of environmental impact.  Individual steel panels are precision crafted in dedicated factories, then assembled on the job site. As only a small amount of work is required in the field, local impact is very minimal.  Bolted steel storage tanks are sometimes referred to as a “Tank in a ...


    By Superior Tank Co., Inc.

  • Five Critical Parts For Your Steel Storage Tank

    Every year, we sell hundreds of parts for bolted tanks and welded steel tanks. Even though many ground storage tanks needing parts were not originally manufactured by Superior Tank Co., Inc., we can provide standard replacement components for steel storage tanks or can fabricate custom parts and accessories to ...


    By Superior Tank Co., Inc.

  • Kijlstra pre-cast tank helps housebuilder go with the flow

    Pre-cast units from specialist manufacturer Kijlstra has helped to speed up the installation of a large concrete attenuation tank at a new housing development in Scotland. Groundworks contractor Mulholland Contracts installed the 31 m long, 8.65 m wide and 0.88 m deep underground tank in just four days, allowing other construction works to get started and minimising delay. The attenuation tank is ...


    By Kijlstra LTD.

  • Maximum Efficiency for...Saving Water

    In an attempt to protect our ecological surroundings and minimize the negative effects of industrial processes, it is necessary to purify and recover the waters used during washing operations of sand washing, quarrying and recycling operations. The first step is to recover 100% of the waters used and to eliminate the concentration of sludge, thus Baioni's solutions aim at offering a full sludge ...


    By Baioni Crushing Plants Spa

  • Solar water pumps for the uganda orphanages case study

    Solar Water Pumps for two Ugandan orphanages  The Challenge ...


    By SCL Water

  • Reverse Osmosis: How Does It Figure Into a Dialysis Water System?

    Better than 95% of all dialysis centers use water purification equipment to purify water for dialysis. The centerpiece of these water purification systems has become reverse osmosis. In conjunction with sound pretreatment, RO has proven itself to be the safest, most reliable, and most economical method of purifying water for dialysis. Water plays an important, life-sustaining role for dialysis ...

  • Decentralized Wastewater Treatment

    An application used worldwide, now growing in US to address the needs of small communities and developments Conventional sewer operations managed by small communities provide centralized treatment of wastewater of which residents are accustomed. But the expense of operating these systems as they expand with miles and miles of sewer lines is staggering. Expanding sewer line infrastructure, ...


    By Bio-Microbics, Inc.

  • Oil skimmers cure a header headache

    Oil skimmers are being used in a major Cleveland bolt making plant to clean liquid coolant and clear the air, virtually eliminating the oil smoke and haze that are inherent in hot heading applications. The skimmers are equally efficient in less demanding press operations. Lake Erie Screw Corporation installed the five skimmers - they are Abanaki models - to serve from one to seven headers each. ...


    By Abanaki Corporation

  • Bintulu ad plant now complete

    BIODOME® ASIA, part of KIRK GROUP, has recently completed a state-of-the-art anaerobic digestion plant in East Malaysia for our client Kubota Corporation, consisting of the largest digester tank ever built by KIRK to date which has a capacity in excess of 10,000m³. ...

  • Bintulu Anaerobic Digestion Plant Now Complete

    BIODOME® ASIA, part of KIRK GROUP, has recently completed a state-of-the-art anaerobic digestion plant in East Malaysia for our client Kubota Corporation, consisting of the largest digester tank ever built by KIRK to date which has a capacity in excess of ...

  • Electrophoretic Plating: Gainsborough Hardware Industries

     Background Gainsborough Hardware Industries Ltd was founded in 1967, and is a world leader in the manufacture of door furniture such as door handles, key locks and dead bolts. The company distributes door furniture to more than 26 countries, with principal markets being in the US, UK and Canada. The Process Gainsborough manufacture metal door ...


  • Improved Wastewater Management for Electroplating: Premier Plating Company

     A custom-designed waste water management system is saving Premier Plating Company $14,400 a year on the cost of treatment and disposal of waste produced by the electroplating process. The company has also reduced water consumption at its plants by a massive 2.2 million litres per year. The system cost only $15,000, so the company’s investment has been paid back in less than a year. The ...


  • Town of Manhattan Wastewater Treatment Plant

    The Manhattan treatment plant is a 400,000 GPD plant in two trains, containing six 24 x 5.0 Bio-WheelTM. It is able to nitrify and denitrify, with two anoxic basins ahead of the aeration basins. Two conventional flight and scraper clarifiers are used. Three Penn Valley RA S/MLSS pumps are located in a separate pump room. The plant is designed for a future expansion to 0.8 MGD. At this time the ...


    By H2O Innovation

  • Membrane Bioreactor for Sanitary Landfill

    The Problem The county of Warren NJ owns and operates a sanitary landfill in Oxford Twp, NJ. The facility generates an average of 50,000 gallons per day of leachate, with peaks to 100,000 gallons per day. The facility was discharging to a local POTW from their lagoon, but they were facing requirements for nitrogen removal from the POTW and needed a new system to provide ...


    By Dynatec Systems Inc.

  • Recycling Mining Tires | A Practical Solution to a Giant Problem

    The largest mining tires are nearly 14 feet tall and 5 feet wide. Not only would it dwarf a person, it wouldn’t even fit in a living room. Even off the road (OTR) tires of a more modest variety are typically 9 feet in diameter, made for large, OTR mining vehicles. They’re made to move the earth and must bear both incredible weight and brutal road conditions. The Giant ...


    By Western Tire Recyclers

  • Award Winning Large Diameter FRP Stacks For Magnesium Extraction Plant

    When Fabricated Plastics Limited of Maple (Toronto), Ontario, Canada was awarded a contract by a world renowned Mining/Metallurgical Company, it proved to be a chance to exhibit their engineering excellence in several ways. First they had to demonstrate that their proposed use of Fibreglass Reinforced Plastic (FRP) was clearly the material of choice in competition with other materials. Then they ...


    By Fabricated Plastics Limited

  • Processing Wastewater Sludge Using Dewatering Containers

    The relative cost of dewatering equipment varies widely and is directly related to the processing rate. For smaller utilities that need to dewater sludge in batches, dewatering containers are an alternative that can be relatively inexpensive and simple when compared to other technologies on the market. The most common type of dewatering container is based on a roll-off box design, although any ...


    By Flo Trend® Systems, Inc.

  • Material Matters - An Engineering and Fabrication Challenge

    The world of engineering is a very large and diverse universe which ranges from electrial, mechanical and civil to environmentaland structural. It is true that their varied disciplines have many qualities in common, e.g. the mixture of logic, creativity, awareness of cost /benefit ratio etc., are requirements of all engineering. It is equally true that each discipline has its own mind set, ...


    By Fabricated Plastics Limited

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you